Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: vcds basic setting oxygen sensors

  1. #1
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    USA
    Posts
    36
    Post Thanks / Like

    vcds basic setting oxygen sensors

    Hi, just a quick question when I try to perform the basic settings for oxygen sensor it just keeps saying test on and keeps running. How long is this test supposed to run because I was holding accellerator and brake for 10-15min and it still did not complete.

    Its a 2010 Audi a5 2.0tfsi vcds version 14

    Edited: Reason: Added AutoScan.

    Code:
    Saturday,06,December,2014,12:52:16:12681
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 14.10.0.0
    Data version: 20141022
    
    
    VIN: WAURFAFR8AA030616   License Plate: JLX-7555
    Mileage: 171920km-106826mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: FR (8T0)
    Scan: 01 03 05 06 08 09 15 16 17 19 2E 36 42 46 47 52 53 55 56 77
             
    
    VIN: WAURFAFR8AA030616   Mileage: 171920km-106826miles
    
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    05-Acc/Start Auth. -- Status: OK 0000
    06-Seat Mem. Pass -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    2E-Media Player 3 -- Status: OK 0000
    36-Seat Mem. Drvr -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    47-Sound System -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    53-Parking Brake -- Status: OK 0000
    55-Headlight Range -- Status: OK 0000
    56-Radio -- Status: Malfunction 0010
    77-Telephone -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine (DL0MA-CAEB)       Labels: 06H-907-115-CAB.clb
       Part No SW: 8K2 907 115 AL    HW: 8K2 907 115 D
       Component: 2.0l R4/4V TF H15 0001  
       Revision: E1H15---    
       Coding: 0114010A180F0160
       Shop #: WSC 50105 000 1048576
       ASAM Dataset: EV_ECM20TFS0118K2907115AL 001001
       ROD: EV_ECM20TFS0118K2907115AL.rod
       VCID: 79F9E9FEF8E8DBE9285-802C
    
    No fault code found.
    Readiness: 0010 0101
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: 8K0-907-379.clb
       Part No SW: 8K0 907 379 CA    HW: 8K0 907 379 CA
       Component: ESP8 quattro  H04 0010  
       Revision: --------    Serial number: --------------
       Coding: 074D18
       Shop #: WSC 06325 000 00000
       VCID: 7AFBF6F2F5EED0F121F-802F
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 05: Acc/Start Auth. (J393)       Labels: 8K0-907-064-05.clb
       Part No SW: 8K0 907 064 DG    HW: 8K0 907 064 DG
       Component: BCM2 1.1      H02 0326  
       Revision: 00002001    
       Coding: 0B0000
       Shop #: WSC 06325 000 00000
       VCID: 78FFECFACBE2C2E157B-802D
    
       Subsystem 1 - Part No SW: 8T0 959 754 A    HW: 8T0 959 754 A
       Component: FBSAUDIB8 IDG  H37 0060 
    
       Subsystem 2 - Part No SW: 8K0 905 852 D    HW: 8K0 905 852 D
       Component: J764 ELV MLB  H37 0042 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 06: Seat Mem. Pass        Labels: 8T0-959-760.clb
       Part No SW: 8T0 959 760 C    HW: 8T0 959 760 C
       Component: MEM-BFS       H10 MEM-BFS       H10 00740074  
       Coding: 08017025002400001000
       Shop #: WSC 06325 000 00000
       VCID: 43854B16C2A45139329-8016
    
    No Faults Found
      or DTCs not supported by controller
      or a communication error occurred
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (J255)       Labels: Redir Fail!
       Part No SW: 8T1 820 043 AQ    HW: 8T1 820 043 AQ
       Component: KLIMA 3 ZONEN H08 0171  
       Revision: C1000000    Serial number: 01211020090751
       Coding: 64022000
       Shop #: WSC 06325 000 00000
       VCID: 000F841A93328A216FB-8055
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels: 8K0-907-063.clb
       Part No SW: 8K0 907 063 P    HW: 8K0 907 063 P
       Component: BCM1 1.0      H25 0380  
       Revision: 10025001    Serial number: 00000000370845
       Coding: 26089095413CAF010001000300003D3D4F1C128802010161000000
       Shop #: WSC 06205 444 84955
       VCID: 3C7730EABF5A2EC1733-8069
    
       Subsystem 1 - Part No SW: 8T1 955 119 D    HW: 8J1 955 119   Labels: 1KX-955-119.CLB
       Component: WWS 141009  H14 0070 
       Coding: 00F531
    
       Subsystem 2 - Part No SW: 8K0 955 559     HW: 8K0 955 559   Labels: 8K0-955-559.CLB
       Component: RLS  H04 0003 
       Coding: 02532C
    
       Subsystem 3 - Part No SW: 8K0 941 531 AN    HW: 8K0 941 531 AN
       Component: E1 - LDS  H08 0090 
    
       Subsystem 4 - Part No SW: 8K0 907 410 B    HW: 8K0 907 410 B
       Component: HOMELINK  H01 0010 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels: 8K0-959-655.clb
       Part No SW: 8K0 959 655 H    HW: 8K0 959 655 H
       Component: AirbagVW-AU10 H39 0560  
       Serial number: 003EGD053J8   
       Coding: 303333334330303030304A55304C38543053
       Shop #: WSC 06325 000 00000
       ASAM Dataset: EV_AirbaECUVWAUDI010 003010
       ROD: EV_AirbaECUVWAUDI010_AU48.rod
       VCID: 428B4E12D5BE583139F-8017
    
       Seat occupied recognition: 
       Subsystem 1 - Part No SW: 8K0 959 339     HW: 8K0 959 339 
       Component: BF-Gewichtss.  H01 0050 
       Serial number: 5810000R0900003PFN
    
       Crash sensor for side airbag; driver side: 
       Serial number: 6334MSME4C52210BA
    
       Crash sensor for side airbag; front passenger side: 
       Serial number: 6344MSME4A463A68P
    
       Crash sensor for side airbag; rear; driver side: 
       Serial number: 6352QSME763F5228P
    
       Crash sensor for side airbag; rear; passenger side: 
       Serial number: 6362QSME623F5802J
    
       Crash sensor for front airbag; driver side: 
       Serial number: 63732SME243F4D388
    
       Crash sensor for front airbag; front passenger side: 
       Serial number: 63832SME603E4122W
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J527)       Labels: 8K0-953-568.clb
       Part No SW: 8K0 953 568 F    HW: 8K0 953 568 F
       Component: Lenks.Modul   H16 0014  
       Revision: --------    Serial number: 90319IJJ000I9 
       Coding: 000016
       Shop #: WSC 06325 000 00000
       VCID: 3D713DEEA44027C944D-8068
    
       Component: E221 - MFL  H02 0003 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels: 8T0-920-xxx-17.clb
       Part No SW: 8T0 920 950 Q    HW: 8T0 920 950 Q
       Component: KOMBIINSTR.   H33 0255  
       Revision: 00000000    Serial number: CHU11Z4A9     
       Coding: 831D01000300D705020001
       Shop #: WSC 06325 123 12345
       VCID: 46835202F1966411157-8013
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels: 8T0-907-468.clb
       Part No SW: 8T0 907 468 R    HW: 8T0 907 468 H
       Component: GW-BEM 5CAN   H06 0105  
       Revision: GB600050    Serial number: 5000G09A11807A
       Coding: 00C303
       Shop #: WSC 06325 000 00000
       VCID: 50AF745A03D2BAA1BFB-8005
    
       Subsystem 1 - Part No SW: 8K0 915 181 E    HW: 8K0 915 181 E
       Component: J367-BDM  H06 0170 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 2E: Media Player 3 (R199)       Labels: 8T0-035-785.clb
       Part No SW: 8T0 035 785 A    HW: 8T0 035 785 
       Component: SG ext.Player H08 0280  
       Revision: 00000000    
       Coding: 020302
       Shop #: WSC 06325 000 00000
       VCID: 397929FEB0681BE9685-806C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 36: Seat Mem. Drvr
    Cannot be reached
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver (J386)       Labels: 8K0-959-793.clb
       Part No SW: 8K0 959 793 H    HW: 8K0 959 793 D
       Component: TSG FA        H11 0306  
       Revision:             Serial number: 0000009506984 
       Coding: 011C03224000120102
       Shop #: WSC 06325 000 00000
       VCID: 4581550ECC906F091CD-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 8K0-907-064-46.clb
       Part No SW: 8K0 907 064 DG    HW: 8K0 907 064 DG
       Component: BCM2 1.1      H02 BCM2 1.1      H02 03260326  
       Coding: 01060698007A444402B0000000000000
       Shop #: WSC 06325 123 12345
       VCID: 78FFECFACBE2C2E157B-802D
    
       Subsystem 1 - Part No SW: 8K0 959 719     HW: 8K0 959 719 
       Component: GTO BF  H06 
    
       Subsystem 2 - Part No: 1K0 951 605 C
       Component: LIN BACKUP HO  
    
       Subsystem 3 - Part No: 8R0 959 591 A
       Component: J245EE20SKB13  
    
    No Faults Found
      or DTCs not supported by controller
      or a communication error occurred
    
    -------------------------------------------------------------------------------
    Address 47: Sound System (J525)       Labels: 8T0-035-223-ASC.clb
       Part No SW: 8T0 035 223 AH    HW: 8T0 035 223 
       Component: DSP STD       H07 0230  
       Revision: S2200000    
       Coding: 0203010102
       Shop #: WSC 06325 000 00000
       VCID: 74E7D8CAD78AA6817B3-8021
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels: 8K0-959-792.clb
       Part No SW: 8K0 959 792 H    HW: 8K0 959 792 D
       Component: TSG BF        H11 TSG BF        H11 03060306  
       Coding: 011C03224C00120102
       Shop #: WSC 06325 123 12345
       VCID: 4487480AC7AA56010B3-8011
    
    No Faults Found
      or DTCs not supported by controller
      or a communication error occurred
    
    -------------------------------------------------------------------------------
    Address 53: Parking Brake (J540)       Labels: 8K0-907-801-V1.clb
       Part No SW: 8K0 907 801 H    HW: 8K0 907 801 H
       Component: EPB Audi B8   H09 0100  
       Revision: 00000003    Serial number: 00000000476999
       Shop #: WSC 00000 000 00000
       VCID: 346718CA970AE681BB3-8061
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range        Labels: 8K0-907-357.clb
       Part No: 8K5 907 357 
       Component: Dynamische LWR  H01 0010  
       Revision: 00000001    Serial number:               
       Coding: 0000002
       Shop #: WSC 06324 000 00000
       VCID: 77FDEFC606FCCD995E1-8022
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio (J503)       Labels: 8Tx-035-1xx-56.clb
       Part No SW: 8T1 035 186 R    HW: 8T1 035 186 R
       Component: Con3 Sirius   H04 0351  
       Revision: 00000006    Serial number: AUZ5Z6I1290404
       Coding: 0402000201048500C3D98F0900
       Shop #: WSC 06325 000 00000
       VCID: 46835202F1966411157-8013
    
       Subsystem 1 - Part No SW: 8T0 919 603 E    HW: 8T0 919 603 E
       Component: Display  
    
    2 Faults Found:
    02635 - Tuner Not Enabled/Activated 
                000 -  - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 7
                        Fault Frequency: 1
                        Reset counter: 96
                        Mileage: 171235 km
                        Time Indication: 0
                        Date: 2014.12.02
                        Time: 22:49:00
    
    03157 - Functionality limited due to Communications Disruption 
                000 -  -  - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 152
                        Mileage: 171926 km
                        Time Indication: 0
                        Date: 2014.12.06
                        Time: 12:31:04
    
                 Freeze Frame:
                        Bin. Bits: 00000000
                        Bin. Bits: 00000000
                        Bin. Bits: 00000000
                        Bin. Bits: 00000000
                        Bin. Bits: 00000000
                        Bin. Bits: 10000000
                        Bin. Bits: 00000000
                        Bin. Bits: 00000000
    
    
    -------------------------------------------------------------------------------
    Address 77: Telephone        Labels: 8P0-862-335.lbl
       Part No SW: 8T0 862 336 D    HW: 8T0 862 336 D
       Component: FSE_256x BT     H37 0600  
       Revision: 00000000    Serial number: 00000005055137
       Coding: 0010370
       Shop #: WSC 06325 000 00000
       VCID: 3C7730EA7F5A2EC1733-8069
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 03:05)--------------------------
    Last edited by tofast2belast; 12-06-2014 at 12:57 PM.

  2. #2
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Lansdale, PA
    Posts
    159
    Post Thanks / Like
    Is the car tuned?

  3. #3
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    USA
    Posts
    36
    Post Thanks / Like
    Yes Apr flashed, I have no codes and have completed this once before but its just sitting at that screen. Exclude the failed/incomplete for catalytic converters. I am only looking to see how long the test is for on the oxygen sensors. Here's image of readiness.

    http://s30.postimg.org/gr3nh0635/201...101428_HDR.jpg

  4. #4
    Ross-Tech Employee DrPeter's Avatar
    Join Date
    Jan 2014
    Location
    16.4905° S, 151.7375° W
    Posts
    1,227
    Post Thanks / Like
    If you have a not deleted or altered any of the emissions related equipment, you will most likely need to road test the vehicle for 5 - 10 miles at highway speeds (above 50mph), include a couple key cycles and repeat as needed until Readiness monitors have been set or until fault codes are present.

    - If after 2 or 3 drive cycles there are no codes and the Readiness monitors have not set, talk to your tuner.

    - You can also post an Auto-Scan, maybe there is an ECM update for your vehicle.

    . . . by the way, did you try to use Basic Settings [200]?
    - If not, try that and follow the instruction messages, basically you will need to Press [On/Off/Next] to turn on BS and then press/hold the brake pedal and then press/hold down the accelerator pedal, ECM should control engine speed and the value block field will count down as the tests run and complete.

    Hope this helps.

    drpeter

  5. Likes Uwe liked this post
  6. #5
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    USA
    Posts
    36
    Post Thanks / Like
    Drpeter, I have driven over 200 miles with a few key cycles. I have tried the basics settings but there's no script to follow so I have to go thru each channel manually and it just keeps running "test on"

    And test steps still to be performed is 0

  7. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,454
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by DrPeter View Post
    - If after 2 or 3 drive cycles there are no codes and the Readiness monitors have not set, talk to your tuner.
    If, after several days and several hundred miles, you still get this:



    .... and no fault codes...

    Then you really do need to talk to your tuner. Get them to flash you back to stock, at least for the time being..

    -Uwe-

  8. Likes DrPeter, Vairis liked this post
  9. #7
    Ross-Tech Employee DrPeter's Avatar
    Join Date
    Jan 2014
    Location
    16.4905° S, 151.7375° W
    Posts
    1,227
    Post Thanks / Like
    Drpeter, I have driven over 200 miles with a few key cycles. I have tried the basics settings but there's no script to follow so I have to go thru each channel manually and it just keeps running "test on"

    And test steps still to be performed is 0
    - Agreed with Uwe, above, flashing back to stock will tell you a lot.

    This is interesting, maybe you should post a before Auto-Scan, so we can have a look at a few things, and then see if anything changes after the flash back to stock, thank you..

    drpeter

  10. Likes Uwe liked this post
  11. #8
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Lansdale, PA
    Posts
    159
    Post Thanks / Like
    Any faults stored? This can prevent readiness tests from starting.

  12. #9
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    USA
    Posts
    36
    Post Thanks / Like
    Quote Originally Posted by Santos View Post
    Any faults stored? This can prevent readiness tests from starting.
    no fault codes. codes(even though none were present) were cleared to reset adaptations and all readiness prior to this.

    i will get the current autoscan today and post it up.

    I spoke with APR and they suggest logging the vehicle and sending them logs. but on their support page what they show for values to log dont correspond to what i can check off. such as the block numbers..

    aka the ones BOLDED. so what Block would this correspond to in Advanced Measuring Data? the other non bolded ones also do not match but I have found those blocks.

    Code:
    Vag-Com
    Block #   Description
    
    001-1     Engine Speed
    
    014-3     Misfire Sum
    
    031-1 Lambda, Current Value
    
    054-3     Accelerator Pedal Position
    
    054-4     Throttle Plate Angle
    
    101-3     Injection Timing (Median)
    
    103-1*    Current Fuel Pressure*
    
    114-4 N75 Duty Cycle
    
    115-3     Boost Pressure (Specified)
    
    115-4     Boost Pressure (Actual)
    
    230-1     Rail Pressure - Specified
    
    230-2     Rail Pressure - Actual
    
    -----------------------------------------
    
    001-1     Engine Speed
    
    003-4     ignition Timing
    
    020-1     Cylinder Ignition Angle Delay (cyl 1)
    
    020-2     Cylinder Ignition Angle Delay (cyl 2)
    
    020-3     Cylinder Ignition Angle Delay (cyl 3)
    
    020-4     Cylinder Ignition Angle Delay (cyl 4)
    
    031-1 Lambda, Current Value
    
    054-3     Accelerator Pedal Position
    
    101-3     Injection Timing (Median)
    
    114-3     Engine Load (actual)
    
    115-4     Boost Pressure (Actual)
    
    230-2     Rail Pressure - Actual

  13. #10
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Lansdale, PA
    Posts
    159
    Post Thanks / Like
    Also, Look at the readiness bits under Generic OBDII mode and compare. I've run into a few cars that showed different results in generic OBD-II vs VAG

  14. Likes DrPeter, Vairis liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •