Results 1 to 6 of 6

Thread: Audi A3 8V5 2017

  1. #1
    Verified VCDS User langyyyy's Avatar
    Join Date
    Jun 2014
    Location
    Slovakia
    Posts
    41
    Post Thanks / Like

    Audi A3 8V5 2017

    Hello,

    Need wiring for 5Q0 907 561 G front acc sensor (J428)... What colors to pins. (8 pin)

    I have on car 8 wires, so need connect all 8 PINS.

    Thank you.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,009
    Post Thanks / Like
    Blog Entries
    1
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes Jack@European_Parts liked this post
  4. #3
    Verified VCDS User langyyyy's Avatar
    Join Date
    Jun 2014
    Location
    Slovakia
    Posts
    41
    Post Thanks / Like
    erwin show me just 6pin option....

  5. #4
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    995
    Post Thanks / Like

  6. Likes Uwe, Jack@European_Parts liked this post
  7. #5
    Verified VCDS User langyyyy's Avatar
    Join Date
    Jun 2014
    Location
    Slovakia
    Posts
    41
    Post Thanks / Like
    Quote Originally Posted by downtime View Post
    Thank you friend, but there is too just 6pin option.

    Pins 4 and 7 are empty. I have crashed car with 8 wires... and plug to the sensor is broken, pins are outside of plug, so I dont know which wire i have to connect to pins 4 and 7. Somewhere I read that it is heater but not sure how to connect it.

  8. #6
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    995
    Post Thanks / Like
    I can check from ELSA. Heating is not controlled by voltage, it's controlled by CAN. I don't think the pins 4 and 7 are connected actually anywhere. All the pinouts I've seen only have 6 pins defined.

    Edit :

    Unfortunately my ELSA stops at model year 2016. That only has 6 pins connected from the 8 and has been like that since March 2012. Probably the new features introduced for >MY2017 for the front assist require the 4 and 7 to be connected as well, I don't know, sorry.

    You can buy time from Erwin and print the diagrams for that car. Only about 7 € / hour so you'll easily print the ACC diagram and some other stuff as well in that one hour.
    Last edited by downtime; 04-27-2019 at 07:14 AM.

  9. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •