Results 1 to 6 of 6

Thread: HN network profile count lower after delete profile

  1. #1
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    Minnesota USA
    Posts
    34
    Post Thanks / Like

    HN network profile count lower after delete profile

    I found something that may or may not be normal, and figured I would ask since I couldn't find the answer using the forum search.

    I recently removed a network profile from my HN. after removing, I had 7 total profiles available rather than 8. Is this normal?

    does the count only reset to 8 if you perform the 45-50 second button hold to reset all network profiles?

    If this is normal I'll just forget about it. I don't anticipate needing 7 unique network profiles...

  2. #2
    Verified VCDS User
    Join Date
    Feb 2014
    Location
    UK
    Posts
    136
    Post Thanks / Like
    I think 1 is always the AP mode setting for a direct connection to the hexnet. so 1 is AP and 7 are infrastructure

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    Minnesota USA
    Posts
    34
    Post Thanks / Like
    Correct, profile 1 is AP mode, after removing one profile I now have 6 profiles for infrastructure mode and 1 profile for AP mode

  5. #4
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    852
    Post Thanks / Like
    It sounds like a bug... how did you delete the profile, through VCI-Config or VCDS-Mobile? Does it come back if you do a 45-second button reset?

  6. Likes Uwe liked this post
  7. #5
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    554
    Post Thanks / Like
    Just tried this on our test interface.

    Connected to Wi-Fi via VCI-Config then checked profiles in VCDS-Mobile.

    Removed and re-added via VCI-Config, and sure enough, one less profile:

    Apparently I should put something witty or profound in here.....

  8. #6
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    Minnesota USA
    Posts
    34
    Post Thanks / Like
    I've been making changes to the network profiles via VCDS-Mobile UI. The SSID for main network doesn't show up in VCIConfig.

    The 45-50 second reset puts the profile count back to 8.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •