Results 1 to 8 of 8

Thread: Audi tt 8n Stops cheating

  1. #1
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Norway
    Posts
    32
    Post Thanks / Like

    Audi tt 8n Stops cheating

    hey i got some trouble with my audi tt 8n
    At first it would not start when it got hot after short stops
    got up g28 sensor, bought new to replace it tomorrow. Then it began to cheat after 60 miles of driving and died when I switched, so after 30 minutes it stopped. When the car is about half an hour I get started. Then I got several error codes. But wondering if it can be just g28 that is wrong or if there is anything more?

    Code:
    Saturday,13,April,2019,19:05:48:36574
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64)  HEX-V2 CB: 0.4436.4
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    Mileage: 246190km-152975mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8N - Audi TT (1999 > 2007)
    Scan: 01 02 03 08 15 17 22 35 37 45 55 56 76 77
     
       Mileage: 246190km-152975miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06A-906-032-AJQ.clb
       Part No: 8N0 906 018 AB
       Component: 1.8L R4/5VT         0002  
       Coding: 05500
       Shop #: WSC 00082  
       VCID: 71BF281208B1F76F613-5160
    
    1 Fault Found:
    16706 - Engine Speed Sensor (G28) 
                P0322 - 35-10 - No Signal - Intermittent
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 8N0-907-379-MK20-E.clb
       Part No: 8N0 907 379 D
       Component: ESP     20    CAN  V006   
       Coding: 23049
       Shop #: WSC 06435  
       VCID: 3D27C4220469430FB5B-4B00
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8N0-820-043.lbl
       Part No: 8N0 820 043 
       Component: TT-KLIMAVOLLAUTOMAT D02  
       Coding: 00040
       Shop #: WSC 06435  
       VCID: 678B464A367539DF3F7-2580
    
    1 Fault Found:
    00604 - Potentiometer Positioning Motor for Air Flow Flap (G113) 
                30-10 - Open or Short to Plus - Intermittent
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8N8-909-601.lbl
       Part No: 8N8 909 601 
       Component: Airbag Front+Seite 1008  
       Coding: 10102
       Shop #: WSC 01236  
       VCID: 77AB160A66D5A95FAF7-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8Nx-919-xxx-17.lbl
       Part No: 8N1 919 860 C
       Component: KOMBI+WEGFAHRS. M73 D30  
       Coding: 00144
       Shop #: WSC 00530  
       VCID: 3B23CA3A1A7D4D3F8BF-4B00
    
       Subsystem 1 - Part No: Ident
       Component: Nr. Wegfahrs.:AUZ5Z0F2106041  
       Ident.-Nr. Wegfahrs.:AUZ5Z0F2106041
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 35: Centr. Locks        Labels:. 8Nx-962-267.lbl
       Part No: 8N8 962 267 
       Component: Zentralverrieg.     D04  
       Coding: 04672
       Shop #: WSC 01236  
       VCID: 7EA5032E49EF9817EC1-4EEA
    
    2 Faults Found:
    01559 - Drivers Door 
                58-10 - Can't Lock - Intermittent
    01559 - Drivers Door 
                60-10 - Won't Safe - Intermittent
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range        Labels: 4B0-907-357-AUT.lbl
       Part No: 4B0 907 357 
       Component: LEUCHTWEITEREGLER  D003  
       Coding: 00009
       Shop #: WSC 06435  
       VCID: 65974C42CC792BCF0DB-5160
    
    No fault code found.
    
    End----------(Elapsed Time: 02:50, VBatt start/end: 12.5V/12.5V)-----------

    Code:
    Saturday,20,April,2019,22:39:47:36574
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64)  HEX-V2 CB: 0.4436.4
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    VIN:    License Plate: BP84092
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
                    Address 01: Engine       Labels: 06A-906-032-AJQ.clb
    Control Module Part Number: 8N0 906 018 AB
      Component and/or Version: 1.8L R4/5VT         0002
               Software Coding: 05500
                Work Shop Code: WSC 00082  
                          VCID: 71BF281208B1F76F613-5160
    3 Faults Found:
    
    16706 - Engine Speed Sensor (G28) 
                P0322 - 35-00 - No Signal
    16717 - Knock Sensor 2 (G66) 
                P0333 - 35-10 - Signal too High - Intermittent
    16712 - Knock Sensor 1 (G61) 
                P0328 - 35-10 - Signal too High - Intermittent
    
    Readiness: 0000 0000
    Last edited by Uwe; 04-20-2019 at 05:26 PM. Reason: CODE tags

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,518
    Post Thanks / Like
    Blog Entries
    1
    Check wiring diagrams to see of G28, G61, and G66 have anything in common.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    15,085
    Post Thanks / Like
    Improper G28 or installed incorrect, overfilled oil or contaminated oil, Bad harness, shield or bad ecu.
    Check that consumers not running hot with no DTC due to possible FOD!

    Please clear codes and immediately repost a fresh auto-scan.

    JPPSG
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  4. #4
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Norway
    Posts
    32
    Post Thanks / Like
    So there may also be errors in the ecu that do this?

    goes g66 and g28 together So that is, if the g28 sensor is defective then can I get error code on the G66 simultaneously?

  5. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,518
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by cleo View Post
    So that is, if the g28 sensor is defective then can I get error code on the G66 simultaneously?
    Unlikely. What I am suggesting is that you look for a common cause other than the sensors themselves; something like a common ground point, a common voltage supply, or anything of that nature.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. Likes Fredrick Awuor liked this post
  7. #6
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Norway
    Posts
    32
    Post Thanks / Like
    Now I deleted all the errors.

    and drove a little round then stopped it right when I got home, and now is just the g28 coming up?

    Then I'll try and measure the voltages on the cables tomorrow.

  8. #7
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Norway
    Posts
    32
    Post Thanks / Like
    Then I turned on the car a little today. Replaced this g28 sensor, erased error codes tested the car starts and goes well now without stopping. Must do clean wires now so what a lot of shit ravaged them. It just went up a bit to speed but calmed down a lot after driving the car. So then it may be the Earth again?
    So there may be cable breakage on the cable?

    Do not get multiple error codes on the car for now.

  9. #8
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Norway
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Improper G28 or installed incorrect, overfilled oil or contaminated oil, Bad harness, shield or bad ecu.
    Check that consumers not running hot with no DTC due to possible FOD!

    Please clear codes and immediately repost a fresh auto-scan.

    JPPSG

    What causes oil to contaminate you? Should oil change soon on the car, it may not be good anymore?

    Here's the new autoscan

    Code:
    Sunday,21,April,2019,15:55:40:36574
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64)  HEX-V2 CB: 0.4436.4
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    VIN:    License Plate: BP
    Mileage: 246930km-153435mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8N - Audi TT (1999 > 2007)
    Scan: 01 02 03 08 15 17 22 35 37 45 55 56 76 77
     
       Mileage: 246930km-153435miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06A-906-032-AJQ.clb
       Part No: 8N0 906 018 AB
       Component: 1.8L R4/5VT         0002  
       Coding: 05500
       Shop #: WSC 00082  
       VCID: 71BF281208B1F76F613-5160
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 8N0-907-379-MK20-E.clb
       Part No: 8N0 907 379 D
       Component: ESP     20    CAN  V006   
       Coding: 23049
       Shop #: WSC 06435  
       VCID: 3D27C4220469430FB5B-4B00
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8N0-820-043.lbl
       Part No: 8N0 820 043 
       Component: TT-KLIMAVOLLAUTOMAT D02  
       Coding: 00040
       Shop #: WSC 06435  
       VCID: 678B464A367539DF3F7-2586
    
    2 Faults Found:
    00604 - Potentiometer Positioning Motor for Air Flow Flap (G113) 
                29-10 - Short to Ground - Intermittent
    01273 - Fresh Air Blower (V2) 
                17-10 - Control Difference - Intermittent
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8N8-909-601.lbl
       Part No: 8N8 909 601 
       Component: Airbag Front+Seite 1008  
       Coding: 10102
       Shop #: WSC 01236  
       VCID: 77AB160A66D5A95FAF7-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8Nx-919-xxx-17.lbl
       Part No: 8N1 919 860 C
       Component: KOMBI+WEGFAHRS. M73 D30  
       Coding: 00144
       Shop #: WSC 00530  
       VCID: 3B23CA3A1A7D4D3F8BF-4B00
    
       Subsystem 1 - Part No: Ident
       Component: Nr. Wegfahrs.:AUZ5Z0F2106041  
       Ident.-Nr. Wegfahrs.:AUZ5Z0F2106041
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 35: Centr. Locks        Labels:. 8Nx-962-267.lbl
       Part No: 8N8 962 267 
       Component: Zentralverrieg.     D04  
       Coding: 04672
       Shop #: WSC 01236  
       VCID: 7EA5032E49EF9817EC1-4EEA
    
    2 Faults Found:
    01559 - Drivers Door 
                58-10 - Can't Lock - Intermittent
    01559 - Drivers Door 
                60-10 - Won't Safe - Intermittent
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range        Labels: 4B0-907-357-AUT.lbl
       Part No: 4B0 907 357 
       Component: LEUCHTWEITEREGLER  D003  
       Coding: 00009
       Shop #: WSC 06435  
       VCID: 65974C42CC792BCF0DB-5160
    
    No fault code found.
    
    End----------(Elapsed Time: 02:49, VBatt start/end: 12.3V/12.5V)-----------
    Last edited by Uwe; 04-21-2019 at 09:37 AM. Reason: CODE tags

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •