VW Golf mk4 G200

   #1  
J

jmldn

Verified VCDS User
Verified
Joined
Mar 31, 2017
Messages
3
Reaction score
3
Location
UK
VCDS Serial number
C?ID=278819
Hi all, I have a 2000 model golf 4 1.9 tdi. I have the ESP light on and the scan tells me it’s the G200 sensor. I changed this sensor but the light remains on. I think this is quite common but any help would be much appreciated. Vin is WVWZZZ1JZYW708137

Code: 
Thursday,18,April,2019,15:48:34:38202
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.1.0 (x64)
Data version: 20190114 DS296.0
www.Ross-Tech.com





--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 1J - VW Golf/Bora IV (1998 > 2006)
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
          76
 
   Mileage: 124280km-77224miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 038-906-012-AGR.clb
   Part No: 038 906 012 M
   Component:  1,9l R4 EDC 0000SG  2813  
   Coding: 00002
   Shop #: WSC 01317  
   VCID: 1A3C161D860A839A33-4B40

No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1J0-907-37x-ESP-F.lbl
   Part No: 1C0 907 379 
   Component: ESP     20    CAN  V005   
   Coding: 18945
   Shop #: WSC 01317  
   VCID: 67DA7FE905F8EE727C-4B26

1 Fault Found:
01423 - Lateral Acceleration Sensor (G200) 
            57-00 - Electric Circuit Failure

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 6Q0-909-605-VW5.lbl
   Part No: 6Q0 909 605 A
   Component: 02 AIRBAG VW5       0004  
   Coding: 12338
   Shop #: WSC 01317  
   VCID: 3566E5A10FD44CE23E-4B26

1 Fault Found:
00532 - Supply Voltage B+ 
            07-10 - Signal too Low - Intermittent

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1J0-920-xx0-17.lbl
   Part No: 1J0 920 902 EX
   Component: KOMBI+WEGFAHRS. BOO V22  
   Coding: 01442
   Shop #: WSC 00352  
   VCID: 7EF43A8D7A624FBAAF-5164

   Subsystem 1 - Part No: Ident
   Component: Nr. WEGFAHRS.:VWZ6Z0X1188718  
   Ident.-Nr. WEGFAHRS.:VWZ6Z0X1188718

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901 
   Component: Gateway K<->CAN    0001  
   Coding: 00006
   Shop #: WSC 00352  
   VCID: 70E814B5303629CA2D-5182

No fault code found.

-------------------------------------------------------------------------------
Address 35: Centr. Locks        Labels: 1C0-962-258-II.lbl
   Part No: 1C0 962 258 J
   Component: 01 Zentr.Verriegel. 0002  
   Coding: 04097
   Shop #: WSC 01317  
   VCID: 2E54CACDEA827F3A7F-4B58

No fault code found.

End-------------------------(Elapsed Time: 05:01)-
 
Last edited by a moderator:
   #2  
NZDubNurd

NZDubNurd

Verified VCDS User
Verified
Joined
Nov 10, 2014
Messages
1,518
Reaction score
2,260
Location
New Zealand
VCDS Serial number
C?ID=230482
Have you checked the wiring is intact?

I'll assume you didn't buy a brand new genuine Sensor...

It is a somewhat common problem and a used sensor is possibly faulty too. They also don't like being dropped... if it was posted to you...

People have opened them and repaired the dry joints... but you have to be very careful - it is a safety related item.
 
   #3  
J

jmldn

Verified VCDS User
Verified
Joined
Mar 31, 2017
Messages
3
Reaction score
3
Location
UK
VCDS Serial number
C?ID=278819
It was second hand but the seller seemed knowledgeable and has sold many of them. I checked the wiring but found nothing obvious, it’s a clean low mileage 1 owner car and there have been no repairs or fingers fiddling with anything previously
 
   #4  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,024
Reaction score
9,035
Location
Western PA, USA
Per diagram # 13 / 5

Anti-locking brake system (ABS) with electronic differential lock (EDL), traction control system (TCS) and electronic stability program (ESP) from May 1999​

G200 is a straight shot to the J104 (ABS module). Since the wires checked out OK you might want to compare the voltage supply and ground from J104 to to nearby G202 (Yaw rate sensor). If the supply voltage and ground readings are the same I somewhat doubt the ABS module is faulty.

In that case, a faulty used G200 per NZDubNurd's suggestion would be the best case scenario.
 
   #5  
J

jmldn

Verified VCDS User
Verified
Joined
Mar 31, 2017
Messages
3
Reaction score
3
Location
UK
VCDS Serial number
C?ID=278819
Great info thank you. I got the light off today using Ross Tech procedure and I will see what happens over the coming days
 
You must log in or register to reply here.
Back
Top