Help! Can’t Recode ABS with VCDS Lite
Hi - trying to code my abs as per Ross tech procedure but can’t get past the last necessary step of calibrating the steering angle sensor
- after coding & clearing any dtc’s when I open up basic settings 001 it doesn’t let me press “Go!” To activate the calibration -
I have tried many times, any help would be greatly appreciated- Thanks!!!
Code:
Chassis Type: 4B - Audi A6 C5
Scan: 01,02,03,06,08,15,16,17,18,22,34,35,36,37,45,55,56,57,65,67,75,76,77
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Controller: 4D0 907 560 CE
Component: 4.2L V8/5V G 0002
Coding: 07752
Shop #: WSC 02325
VCID: 6BA94FB00A9D
WAUML64B62N148552 AUZ7Z0B2121682
No fault code found.
Readiness: 0110 1101
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 01L-927-156.LBL
Controller: 4D0 927 156 EA
Component: AG5 01L 4.2l5V RdW 1010
Coding: 00001
Shop #: WSC 02314
VCID: 6CAB4CAC0F93
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 4B0-614-517.LBL
Controller: 4B0 614 517 R
Component: ABS/ESP allrad 2330
Coding: 06397
Shop #: WSC 12345
VCID: 301398DCE33B
1 Fault Found:
01486 - System Function Test Activated
35-00 - -
-------------------------------------------------------------------------------
Address 06: Seat Mem. Pass Labels: None
Controller: 4B0 959 760 C
Component: Sitzmemory R1 BF 0103
Coding: 00003
Shop #: WSC 00000
VCID: 2D2D81A8F409
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 4B0-820-043-MY1.LBL
Controller: 4B0 820 043 AD
Component: A6-Klimavollautomat 0105
Coding: 00010
Shop #: WSC 02325
VCID: 5CCB1C6CDF33
5 Faults Found:
01810 - Actuating Motor for Temperature Flap; Right (V159)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-10 - Blocked or No Voltage - Intermittent
01592 - Air Quality Sensor (G238)
57-10 - Electric Circuit Failure - Intermittent
01317 - Control Module in Instrument Cluster (J285)
49-10 - No Communications - Intermittent
01314 - Engine Control Module
49-10 - No Communications - Intermittent
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 4B0-959-655-AI7.LBL
Controller: 4B0 959 655 N
Component: Airbag 8.4E 5001
Coding: 0000305
Shop #: WSC 02325
VCID: 3B09BFF03A7D
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 4B0-907-487.LBL
Controller: 4B0 907 487 H
Component: Lenkradelektronik D01
Coding: 01015
Shop #: WSC 02325
VCID: 31159DD8E831
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 4B0-920-xxx-17.LBL
Controller: 4B0 920 981 P
Component: KOMBI+WEGFAHRS. VDO D11
Coding: 03283
Shop #: WSC 19411
VCID: 331997D0122D
WAUML64B62N148552 AUZ7Z0B2121682
4 Faults Found:
01176 - Key
07-10 - Signal too Low - Intermittent
00849 - S-contact at Ignition/Starter Switch (D)
31-10 - Open or Short to Ground - Intermittent
01314 - Engine Control Module
49-10 - No Communications - Intermittent
01315 - Transmission Control Module
49-10 - No Communications - Intermittent
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 4B0-962-258.LBL
Controller: 4B0 962 258 J
Component: Central Lock/Alarm D35
Coding: 15885
Shop #: WSC 02325
VCID: 301398DCE33B
9 Faults Found:
01366 - Opened Due to Crash Signal
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01572 - Alarm triggered by Door Contact Switch; Passenger Side
35-00 - -
01374 - Alarm triggered by Terminal 15
35-00 - -
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01368 - Alarm triggered by Luggage Compartment Switch
35-00 - -
00955 - Key 1
09-10 - Adaptation Limit Surpassed - Intermittent
00956 - Key 2
09-10 - Adaptation Limit Surpassed - Intermittent
01573 - Alarm triggered by Door Contact Switch; Left Rear
35-00 - -
-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr Labels: None
Controller: 4B0 959 760 B
Component: Sitzmemory R1 F 0102
Coding: 00001
Shop #: WSC 00000
VCID: 2C2B8CACCF13
No fault code found.
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: None
Controller: 4B0 951 178 A
Component: Innenraumueberw. D04
Coding: 00101
Shop #: WSC 02325
VCID: 263F7E84D1FF
1 Fault Found:
01377 - Ultra Sonic Sensor for Alarm System; Left (G170)
27-00 - Implausible Signal
-------------------------------------------------------------------------------
Address 55: Xenon Range Labels: 4Z7-907-357.LBL
Controller: 4Z7 907 357
Component: dynamische LWR D07
Coding: 00050
Shop #: WSC 02325
VCID: 047B040C0703
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8D0-035-1xx-56.LBL
Controller: 4B0 035 195 J
Component: symphony II NP2 0050
Coding: 00225
Shop #: WSC 00000
VCID: 27217380D6F5
No fault code found.
-------------------------------------------------------------------------------
Address 75: Telematics Labels: None
Controller: 8E0 035 616
Component: Telematik USA1
Coding: 0002303
Shop #: WSC 02325
VCID: E2B7A2947D57
2 Faults Found:
01528 - Auxiliary Antenna for Telematic (R90)
004 - No Signal/Communication - Intermittent
00003 - Control Module
014 - Defective - Intermittent
-------------------------------------------------------------------------------
Address 76: Park Assist Labels: 8Z0-919-283.LBL
Controller: 8Z0 919 283
Component: Parkingsyst. A6 USA D08
Coding: 01166
Shop #: WSC 02325
VCID: 027702141D17
1 Fault Found:
01547 - Sensor for Parking Aid; Rear Mid-Right (G205)
31-00 - Open or Short to Ground
End --------------------------------------------------------------------------------------------------
Hi - trying to code my abs as per Ross tech procedure but can’t get past the last necessary step of calibrating the steering angle sensor
- after coding & clearing any dtc’s when I open up basic settings 001 it doesn’t let me press “Go!” To activate the calibration -
I have tried many times, any help would be greatly appreciated- Thanks!!!
Last edited: