Results 1 to 9 of 9

Thread: Replacing Instrument Cluster B5 A4

  1. #1
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    Norway
    Posts
    16
    Post Thanks / Like

    Replacing Instrument Cluster B5 A4

    hello!

    so this is the situation, the car i bought dont have the original cluster, so all warning lights are going off, i cant connect to the immo.
    i have ordered a original used A4 b5 2000 model TSQ instrument cluster, and i didnt think about the recoding when i bought it.

    so my question is, have i made a big problem for my self? is it no way possible to recode without the pins? i hope god that the seller has taken out the pincode.

    what can i do?

    (ofcourse i haven't received the cluster yet)

    the car can run without the cluster, but that shouldnt be possible because of the immo?

    maybe the ecu is unlocked from when it was chipped? then it wouldnt be a problem?

  2. #2
    Verified VCDS User
    Join Date
    Sep 2016
    Location
    Riga, Latvia
    Posts
    747
    Post Thanks / Like
    Some early A4's had separate immo box, but in MY 2000 it should be integrated in IPC.
    Post an autoscan from car in it's current state.

  3. Likes Uwe, Jack@European_Parts liked this post
  4. #3
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    Norway
    Posts
    16
    Post Thanks / Like
    here is the autoscan.

    Code:
    Sunday,07,April,2019,17:28:54:20400
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0  HEX-V2 CB: 0.4437.4
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    VIN:    License Plate: DJ85466
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8D - Audi A4/S4/RS4 B5 (1995 > 2002)
    Scan: 01 02 03 08 15 16 17 25 35 37 45 55 56 57 67 75 76 77
     
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 058-907-557-AJL.lbl
       Part No: 8D0 907 558 DA
       Component: 1.8L R4/5VT MOTR HS D01  
       Coding: 04001
       Shop #: WSC 00000  
       VCID: 73B3DE9502A1D39F93F-4B3C
    
    3 Faults Found:
    16500 - Engine Coolant Temp. Sensor (G62) 
                P0116 - 35-10 - Implausible Signal - Intermittent
    16486 - Mass Air Flow Sensor (G70) 
                P0102 - 35-10 - Signal too Low - Intermittent
    01247 - Activated Charcoal Filter (EVAP) System Solenoid Valve 1 (N80) 
                26-10 - Output Open - Intermittent
    Readiness: N/A
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8D0-820-043-1D.lbl
       Part No: 8D0 820 043 P
       Component: A4     KLIMAAUTOMAT D57  
       Coding: 00040
       Shop #: WSC 06325  
       VCID: 2D0708EDA405C56F05B-259E
    
    1 Fault Found:
    01582 - Signal for Coolant Temperature 
                30-00 - Open or Short to Plus
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8D0-959-655-AI8.lbl
       Part No: 8D0 959 655 F
       Component: Airbag Front+Kopf  2001  
       Coding: 00306
       Shop #: WSC 00030  
       VCID: 392F2CBD604D69CF993-5160
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 35: Centr. Locks        Labels:. 8D0-862-257.lbl
       Part No: 8D0 862 257 B
       Component: ZV-Pumpe, Funk      D12  
       Coding: 12865
       Shop #: WSC 06325  
       VCID: 2C0105E99F1FCC67125-4F2E
    
    1 Fault Found:
    01367 - Central Locking Pump Run Time Exceeded (Likely Leak) 
                35-00 -  - 
    
    -------------------------------------------------------------------------------
    Address 45: Inter. Monitor        Labels: 4B0-951-173.lbl
       Part No: 4B0 951 173 
       Component: Innenraumueberw.    D03  
       Coding: 00102
       Shop #: WSC 06325  
       VCID: 6099A1D9A3575807FED-4AC2
    
    No fault code found.
    
    End----------(Elapsed Time: 04:18, VBatt start/end: 12.2V/12.3V)-----------
    Last edited by Uwe; 04-07-2019 at 11:05 AM. Reason: CODE tags

  5. #4
    Verified VCDS User
    Join Date
    Sep 2016
    Location
    Riga, Latvia
    Posts
    747
    Post Thanks / Like
    Your ECU is programmed immo-off or immo emulator is installed. So You don't need to worry about matching Your replacement IPC.

  6. #5
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    Norway
    Posts
    16
    Post Thanks / Like
    Thanks!

    How to you see that if i may ask?

  7. #6
    Verified VCDS User
    Join Date
    Sep 2016
    Location
    Riga, Latvia
    Posts
    747
    Post Thanks / Like
    If at this time Your engine starts and runs ok, and no fault code for missing permission from immo, but there is no address 17 IPC nor address 25 IMMO showing up in autoscan...
    P.S. Since You are verified user, I guess Uwe will move this thread to appropriate section of forum. New User Forum is for introducing Yourself and asking first questions when You already have VCDS interface but You have not got the Verified status yet.
    Code:
    Forum: New User Forum:
    
    New Users (not yet verified) may introduce themselves and post questions here.
    Last edited by MartinsX; 04-07-2019 at 11:18 AM.

  8. Likes Uwe, Jack@European_Parts liked this post
  9. #7
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    Norway
    Posts
    16
    Post Thanks / Like
    Thanks, champ!

  10. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,230
    Post Thanks / Like
    Blog Entries
    1
    Moved to Car Repair Support.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  11. #9
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,548
    Post Thanks / Like
    How to you see that if i may ask?
    In engine controller + Adaption + channel 091.

    0x01-10-091 observe the value & post it.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  12. Likes Uwe, Jetta ,97 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •