Passat NMS, cruise control not working

   #1  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Hello fellow forum users,

I have trouble with my 2013 Passat.
Bought it used from a dealership and the cruise control is not working.
The steering wheel controller got replaced at some point (2018 date sticker) and it was probably never programmed the right way.
When I first opened the coding page there was no value for the cruise control selected.
I set it to "no cruise control installed" and now I can not change it to anything else.
Every time I select another value for the CC I get error 31 "Request out of range"
I assume the controller is not programmed the right way at all but I do not know which values are the correct ones.
I tried it without WSC, with the WSC of the car and with the WSC of the new module and it does not work at all.

If somebody can point me in the right direction I would really appreciate it.

Code:
Friday,05,April,2019,15:49:21:55897
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.9.1.0 (x64)  HEX-V2 CB: 0.4502.4
Data version: 20190114 DS296.0
www.Ross-Tech.com

Dealer/Shop Name: Born's Garage
Workshop Code: 957 09003 000200

VIN: 1VWAP7A3XDC102604   License Plate: PASSAT
Mileage: 80340km-49920mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: A3-VW41 (7N0)
Scan: 01 02 03 08 09 15 16 17 19 25 42 46 4F 52 56 62 72 77

VIN: 1VWAP7A3XDC102604   Mileage: 80340km-49920miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
4F-Centr. Electr. II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (CBU)       Labels: 07K-906-055-CBT.clb
   Part No SW: 07K 906 055 CR    HW: 07K 907 309 A
   Component: 2,5l R5/4V       01 4340  
   Revision: T6H02---    Serial number:               
   Coding: 0000075
   Shop #: WSC 09003 957 00200
   VCID: 0059815A360EA6979ED-8054

No fault code found.
Readiness: 1110 1101

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09G-927-750.clb
   Part No SW: 09G 927 750 LH    HW: 09G 927 750 LH
   Component: AQ 250 6F           2251  
   Revision: 00H97000    Serial number:               
   Coding: 0000840
   Shop #: WSC 09003 957 00200
   VCID: 025D8B523802B487889-8056

1 Fault Found:
18275 - Powertrain Data Bus 
            P1867 - 000 - Missing Message from Steering Wheel (J527)
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 4
                    Reset counter: 201
                    Mileage: 80287 km
                    Time Indication: 0
                    Date: 2019.04.04
                    Time: 06:15:31


-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels:. 1K0-907-379-60EC1F.clb
   Part No SW: 1K0 907 379 BK    HW: 1K0 907 379 BK
   Component: ESP MK60EC1   H31 0152  
   Revision: 00H31001    
   Coding: C54BC0F5492208FCA31103E4921D1061A61000
   Shop #: WSC 09003 957 00200
   VCID: 7CA1F5AA56E6C277C25-8028

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels:| 3C8-907-336.clb
   Part No SW: 561 907 426     HW: 561 907 426 
   Component: AC Manuell    H02 0101  
   Revision: 00001K07    
   Coding: 0010001002
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_ACManuaElectGen2BHTC 001002
   ROD: EV_ACManuaElectGen2BHTC_VW36.rod
   VCID: 58E9893A829ECE5786D-800C

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 1K0-937-08x-09.clb
   Part No SW: 5K0 937 085 S    HW: 5K0 937 085 S
   Component: BCM PQ35 B+   021 0068  
   Revision: BH021001    
   Coding: 6F200E18902B08D408800001160004480071008640801960648060000C70
   Shop #: WSC 09003 957 00200
   VCID: 43D34E566B987D8FC3F-8016

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 5C0 959 655 AE    HW: 5C0 959 655 AE
   Component: AirbagVW10G   014 0851  
   Serial number: 003MWM00K6ZB  
   Coding: 00005033
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_AirbaVW10SMEVW360 001026
   ROD: EV_AirbaVW10SMEVW360.rod
   VCID: 75B7E08E754C933FBDB-8020

   Seat occupied recognition: 
   Subsystem 1 - Part No SW: 5C6 959 339 B    HW: 5C6 959 339 B
   Component: BF-Gewichtss.  H10 0046 
   Serial number: 6940000Y130000PM8P08
   Coding: 303048

   Crash sensor for side airbag: driver side: 
   Subsystem 2 - Part No SW: 5K0 959 354     HW: 5K0 959 354 
   Component: S.Sens.Fahr.V  H02 ---- 
   Serial number: 3572MSME0D715375ZZZY

   Crash sensor for side airbag: front passenger side: 
   Subsystem 3 - Part No SW: 5K0 959 354     HW: 5K0 959 354 
   Component: S.Sens.Beif.V  H02 ---- 
   Serial number: 3582MSME4C045475ZZZZ

   Crash sensor for side airbag: rear: driver side: 
   Subsystem 4 - Part No SW: 5K0 959 351 A    HW: 5K0 959 351 A
   Component: S.Sens.Fahr.H  H02 ---- 
   Serial number: 3516KSME77582921ZZZU

   Crash sensor for side airbag: rear: passenger side: 
   Subsystem 5 - Part No SW: 5K0 959 351 A    HW: 5K0 959 351 A
   Component: S.Sens.Beif.H  H02 ---- 
   Serial number: 3526KSME1E023021ZZZD

   Crash sensor for front airbag: driver side: 
   Subsystem 6 - Part No SW: 5K0 959 659 A    HW: 5K0 959 659 A
   Component: F.Sens.Fahr  H02 ---- 
   Serial number: 3556LSME460E1920ZZZU

   Crash sensor for front airbag: front passenger side: 
   Subsystem 7 - Part No SW: 5K0 959 659 A    HW: 5K0 959 659 A
   Component: F.Sens.Beif  H02 ---- 
   Serial number: 3566LSME3B041920ZZZP

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5K0-953-569.clb
   Part No SW: 5K0 953 569 AL    HW: 5K0 953 569 AL
   Component: LENKS.MODUL   016 0180  
   Revision: --X01---    Serial number: 20180424200235
   Coding: 698A000000
   Shop #: WSC 01286 386 08256
   ASAM Dataset: EV_VW360SteerWheelUDS A03004
   ROD: EV_VW360SteerWheelUDS.rod
   VCID: 025D8B523482B487889-8056

   Multifunction steering wheel control module: 
   Subsystem 1 - Part No SW: 561 959 537     HW: 561 959 537 
   Component: E221__MFL-YVJ  H07 0022 
   Serial number: 00000000000000587169
   Coding: 620000

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-XXX-17.clb-SRI1
   Part No SW: 561 920 960 C    HW: 561 920 960 C
   Component: KOMBI         H06 0705  
   Serial number: 00000000000000
   Coding: 230E01
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04716
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
   VCID: 196FCC3EB914175F793-804C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 7N0-907-530-V2.clb
   Part No SW: 7N0 907 530 AH    HW: 7N0 907 530 AH
   Component: J533  Gateway H50 1634  
   Revision:   H50       Serial number: 27011303290642
   Coding: 461000
   Shop #: WSC 09003 957 00200
   VCID: 76B5E78268CA9827B41-8022

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H06 0705  
   Serial number:               
   Coding: 000000
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6A8DC3F22CF24CC7209-803E

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 3C0-959-70X-GEN4.clb
   Part No SW: 561 959 701     HW: 3C0 959 793 B
   Component: TUER-SG FT    002 0525  
   Revision: 13110009    Serial number: 0006023247
   Coding: 0404D5
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_TSGFPQ25BRFVW46X A04001
   ROD: EV_TSGFPQ25BRFVW46X.rod
   VCID: 5BE39636F3A8254FABF-800E

   Slave Driver: 
   Subsystem 1 - Part No SW: 561 959 811     HW: 561 959 811   Labels: 1K0-959-70X-GEN4.CLB
   Component: J388__TSG_HL  004 4472 
   Serial number: --------------------
   Coding: 800000

No fault code found.

-------------------------------------------------------------------------------
Address 4F: Centr. Electr. II (J520)       Labels:. 1K0-907-532.clb
   Part No SW: 7N0 907 532     HW: 7N0 907 530 AH
   Component: EZE_2         H50 1634  
   Revision:   H50       Serial number: 27011303290642
   Coding: 00000008
   Shop #: WSC 09003 957 00200
   VCID: 6FBBD2E61790A9EF777-803A

   Subsystem 1 - Part No SW: 561 919 204 B    HW: 561 919 204 B
   Component: Analoguhr  008 0005 

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 3C0-959-70X-GEN4.clb
   Part No SW: 561 959 702     HW: 3C0 959 792 B
   Component: TUER-SG BT    002 0525  
   Revision: 15110009    Serial number: 0006158271
   Coding: 0404D4
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_TSGBPQ25BRFVW46X A04001
   ROD: EV_TSGBPQ25BRFVW46X.rod
   VCID: 5CE1952AF6A62277A25-8008

   Slave Passenger: 
   Subsystem 1 - Part No SW: 561 959 812     HW: 561 959 812   Labels: 1K0-959-70X-GEN4.CLB
   Component: J389__TSG_HR  004 4472 
   Serial number: --------------------
   Coding: 800000

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
   Part No SW: 1K0 035 164 D    HW: 1K0 035 164 D
   Component: LOW NAR       H02 0006  
   Revision: -----06S    Serial number: VWZ4Z6N3508946
   Coding: 0500040002000B
   Shop #: WSC 09003 957 00200
   VCID: 2313EED68BD85D8FA3F-8076

No fault code found.

-------------------------------------------------------------------------------
Address 77: Telephone (J412)       Labels:| 7P6-035-730.clb
   Part No SW: 7P6 035 730 K    HW: 7P6 035 730 K
   Component: TELEFON       H15 3200  
   Revision: 1B001001    Serial number: 00007663891589
   Coding: 0A10040000010110
   Shop #: WSC 09003 957 00200
   ASAM Dataset: EV_UHVNA 002720
   ROD: EV_UHVNA_002.rod
   VCID: 3A2D33B21CD23C47909-806E

No fault code found.

End----------(Elapsed Time: 00:53, VBatt start/end: 12.4V/12.3V)-----------
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Try de-activating and re-activating it in the ECU.

[Select]
[01-Engine]
[Coding II]
16167 to de-activate
11463 to activate

See if anything changes in the ECU. I think where you have:
Code:
Component: 2,5l R5/4V       01 4340
you should have
Code:
Component: 2,5l R5/4V      G01 4340

-Uwe-

PS: This is an "NMS" Passat (affectionately aka "Jetta XL"). It is not at all the same as a RDW Passat B7. I've edited the title of the thread to reflect that.
 
   #3  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
PS: This is an "NMS" Passat (affectionately aka "Jetta XL"). It is not at all the same as a RDW Passat B7. I've edited the title of the thread to reflect that.

Thank you for that info, I had no idea of that difference.

I reactivated the CC in the ECU.
It changed the setting like you expected.
C7A3Uyr.png


Sadly the activation in the steering wheel controller 16 still doesn't work. :-(
blGqCfc.png


Like I said, i assume that the coding of this module is completely wrong but i am not sure how to find the right one.
It accepts little changes like activating and deactivating the rear wiper without issues.

This was the initial long code before i touched anything:
pBAnInw.png
 
   #4  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,887
Reaction score
7,762
Location
Westbury, UK
VCDS Serial number
C?ID=1423
Bought it used from a dealership and the cruise control is not working.
The steering wheel controller got replaced at some point (2018 date sticker) and it was probably never programmed the right way.
Don't know if this also applies to your Passat but when I wanted to add cruise control to a B6 S4 as well as adding the cruise control stalk I had to change the SCSM as on the B6 not all SCSMs will accept the cruise control coding.

So I'm wondering if when the SCSM was replaced it was replaced with one that will not accept the cruise control coding?

Maybe someone with access to PL24 can check the part number shown in your Auto-Scan is CC compatible?
 
   #5  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Maybe someone with access to PL24 can check the part number shown in your Auto-Scan is CC compatible?

Hi Dave, I checked the part number with the list here on ross-tech and it is listed as a highline module capable of cruise control and MFSW and so on.
So it should be possible in general to activate it.
 
   #6  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Like I said, i assume that the coding of this module is completely wrong but i am not sure how to find the right one.
Can you post pictures of your steering wheel and cruise control controls please. It's difficult to verify the rest of that module's coding without knowing what that equipment looks like.

-Uwe-
 
   #7  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Of course, here are the pictures:

12sLSp0h.jpg


Since I reactivated the cruise control in the ECU I also get this message in the middle above the miles:

N9BJJlyh.jpg


Wasn't there before.
 
  • Like
Reactions: Uwe
   #8  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
OK, I don't see anything wrong with the coding of the steering wheel control module. Seems to me that with Cruise it should be:
Code:
698A100000
That just adds "Cruise Control controlled via Turn Signal Lever". I'm puzzled why it won't accept that. I also can't think of anything else in the car that needs to be tweaked for cruise control.

The "Err" in the instrument cluster is likely due to some kind of protestation between the ECU and the Steering Wheel module. I'd wager at some point someone disabled Cruise in the ECU to make that error go away.

Hopefully someone else will have some ideas, 'cause I've run out. :(

-Uwe-
 
   #9  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Uwe, I agree with you on the coding but sadly the car does not. :-(

I still get that error 31.
I have read some stuff about the WSC messing things up.
Can this be the case?

My car seems to have at least 2-3 WSC if I include the original one from purchase.

I have also seen the experimental coding information, mentioning something about cruise control on byte 0 bit 0.
Any idea on this?
 
   #10  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
I have read some stuff about the WSC messing things up.
Can this be the case?
Since the module is accepting other coding changes, I really don't think so.

I have also seen the experimental coding information, mentioning something about cruise control on byte 0 bit 0.
Any idea on this?
Color me confused. The "experimental" coding info for that module should show "Lenkwinkelsensor im SMLS", which is equivalent to what the documented coding shows, "Steering Angle Sensor (G85) in Steering Module".

For laughs, why don't you make and post a set of maps from that module, both Measuring Values and Adaptations. There's a bunch of Cruise related stuff in there. I'm by no means confident, but perhaps there's a clue on there somewhere.

-Uwe-
 
   #11  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
I thought for whatever reason the experimental information came out of VCDS and not of the module, lol.

Here are the maps that I got out of the module:
Code:
SW:5K0-953-569-AL   HW:5K0-953-569-AL ---  Steering wheel
Component:LENKS.MODUL   016 0180, Coding:698A000000
EV_VW360SteerWheelUDS,A03004,EV_VW360SteerWheelUDS.rod
Sunday,07,April,2019,12:52:21:55897
VCDS Version: Release 18.9.1 (x64)  Data version: 20190114 DS296.0
VCID: 025D8B523482B487889-8056

Group,Description,Actual
IDE00329-MAS00232,Buttons for multi-function display-MFI button UP,not activated, 
IDE00329-MAS00233,Buttons for multi-function display-MFI button DOWN,not activated, 
IDE00329-MAS00234,Buttons for multi-function display-MFI button RESET / OK,not activated, 
IDE00329-MAS00236,Buttons for multi-function display-MFI buttons: number 3/4,3, 
IDE00329-MAS00688,Buttons for multi-function display-Multifunction indicator,coded, 
IDE00329-MAS02317,Buttons for multi-function display-Button code 1,0, 
IDE00333,Driver assistance systems button,not activated, 
IDE00333-MAS00243,Driver assistance systems button-Buttons for driver assistance systems: status,No malfunction detected, 
IDE02486,Data logger triggering,active, 
IDE02583-IDE00087,Steering wheel Tiptronic switch-Tiptronic status,not coded/not installed, 
IDE02583-MAS00118,Steering wheel Tiptronic switch-Tiptronic steering wheel +,not coded/not installed, 
IDE02583-MAS00119,Steering wheel Tiptronic switch-Tiptronic steering wheel -,not coded/not installed, 
IDE02588-IDE00020,Terminal signals and start release-Terminal 15 status,On, 
IDE02588-IDE00773,Terminal signals and start release-Terminal 15 status via CAN,On, 
IDE02588-IDE01715,Terminal signals and start release-Status terminal S,On, 
IDE02588-IDE01716,Terminal signals and start release-Terminal 50 status,OFF, 
IDE02588-IDE02761,Terminal signals and start release-Status of terminal P,OFF, 
IDE02588-IDE02762,Terminal signals and start release-Status terminal 75x,On, 
IDE02693-IDE02292,Turn signals and parking lights-Parking light switch position,not activated, 
IDE02693-IDE02335,Turn signals and parking lights-Signal light switch position,not activated, 
IDE02694-MAS01288,Signal horn activation-Signal horn,not activated, 
IDE02695-IDE01268,Front wiping: front washing-Windshield wiper,not activated, 
IDE02695-MAS02322,Front wiping: front washing-Windshield wiper: winter position,OFF, 
IDE02695-MAS02338,Front wiping: front washing-Windshield wiper: intermittent stage,Stage 1, 
IDE02695-MAS02339,Front wiping: front washing-Windshield washer system,not activated, 
IDE02695-MAS02340,Front wiping: front washing-Windshield washer system: pulse,not activated, 
IDE02696-IDE02711,Rear wiping: rear washing-Rear Window Wiper,not coded/not installed, 
IDE02696-MAS02341,Rear wiping: rear washing-Rear window washer system,not coded/not installed, 
IDE02697-IDE02178,Multifunction unit control module-Status remote control,Not coded, 
IDE02697-IDE02694,Multifunction unit control module-Signal horn activation,not coded/not installed, 
IDE02697-IDE02711,Multifunction unit control module-Rear Window Wiper,not coded/not installed, 
IDE02697-IDE02743,Multifunction unit control module-High Beam,not coded/not installed, 
IDE02697-MAS01364,Multifunction unit control module-Stage 1,not coded/not installed, 
IDE02697-MAS01365,Multifunction unit control module-Stage 2,not coded/not installed, 
IDE02697-MAS01433,Multifunction unit control module-Intermittent operation,not coded/not installed, 
IDE02697-MAS01434,Multifunction unit control module-Flick wipe,not coded/not installed, 
IDE02697-MAS02339,Multifunction unit control module-Windshield washer system,not coded/not installed, 
IDE02697-MAS02341,Multifunction unit control module-Rear window washer system,not coded/not installed, 
IDE02697-MAS02354,Multifunction unit control module-Headlamp flasher,not coded/not installed, 
IDE02697-MAS02362,Multifunction unit control module-Flashing: right,not coded/not installed, 
IDE02697-MAS02363,Multifunction unit control module-Flashing: left,not coded/not installed, 
IDE02743,High Beam,not activated, 
IDE02744-MAS01458,Steering wheel heater-Operating condition,not coded/not installed, 
IDE02744-MAS01490,Steering wheel heater-Energy management,not coded/not installed, 
IDE02744-MAS02311,Steering wheel heater-Steering wheel heating button,not coded/not installed, 
IDE02745-IDE00095,Ignition key removal lock-Status of selector lever lock,No malfunction detected, 
IDE02745-IDE00096,Ignition key removal lock-Selector lever position,8, 
IDE02745-IDE02579,Ignition key removal lock-Park selector lever position,Engaged and locked, 
IDE02745-MAS02359,Ignition key removal lock-Signal transmission (alt bit),CAN Bit = 0, 
IDE02745-MAS02364,Ignition key removal lock-Ignition key removal lock: activation,OFF, 
IDE02746-IDE00075,Enabling electric steering column lock-Vehicle speed,not coded/not installed, 
IDE02746,Enabling electric steering column lock,Not coded, 
IDE02746-MAS01468,Enabling electric steering column lock-Terminal 15,On, 
IDE02746-MAS02108,Enabling electric steering column lock-Signal vehicle speed (alt bit),not coded/not installed, 
IDE02746-MAS02359,Enabling electric steering column lock-Signal transmission (alt bit),not coded/not installed, 
IDE02747-IDE01215,Multifunction steering wheel: dimming-Terminal 58d dimmer,No malfunction detected, 
IDE02747-IDE01216,Multifunction steering wheel: dimming-Terminal 58s dimmer,No malfunction detected, 
IDE02747-MAS02352,Multifunction steering wheel: dimming-Display dimming terminal 58d,0, 
IDE02747-MAS02353,Multifunction steering wheel: dimming-Switch dimming terminal 58s,0, 
IDE04059-MAS00218,Automatic S-contact shut-off-Driver door,not coded/not installed, 
IDE04059-MAS02104,Automatic S-contact shut-off-Door lock: safe,not coded/not installed, 
IDE04059-MAS02105,Automatic S-contact shut-off-Signal from door lock: engaged,not coded/not installed, 
IDE04059-MAS02646,Automatic S-contact shut-off-Key type,not coded/not installed, 
IDE04059-MAS03357,Automatic S-contact shut-off-Electronic ignition lock signal: terminal 15,On, 
IDE04059-MAS03358,Automatic S-contact shut-off-Electronic ignition lock signal: terminal S,On, 
MAS00125-IDE00355,Cruise control system-Cruise Control System (CCS): status,not coded/not installed, 
MAS00125-IDE00356,Cruise control system-Cruise Control System (CCS): switch position,not coded/not installed, 
MAS00125-IDE00901,Cruise control system-Automatic distance control: switch position,not coded/not installed, 
MAS00125-MAS00080,Cruise control system-Coding information,not coded/not installed, 
MAS00125-MAS00320,Cruise control system-Main switch,not coded/not installed, 
MAS00125-MAS00323,Cruise control system-Decelerate tap,not coded/not installed, 
MAS00125-MAS00324,Cruise control system-Accelerate tap,not coded/not installed, 
MAS00125-MAS00325,Cruise control system-Setting,not coded/not installed, 
MAS00125-MAS00326,Cruise control system-Activation,not coded/not installed, 
MAS00125-MAS02309,Cruise control system-Accelerate,not coded/not installed, 
MAS00125-MAS02310,Cruise control system-Decelerate,not coded/not installed, 
MAS00125-MAS02321,Cruise control system-Cancel,not coded/not installed, 
MAS00125-MAS02343,Cruise control system-Station coding,not coded/not installed, 
MAS00769-MAS01065,Multifunction steering wheel control module-Brand,VW, 
MAS00769-MAS02317,Multifunction steering wheel control module-Button code 1,0, 
MAS00769-MAS02318,Multifunction steering wheel control module-Button code 2,not coded/not installed, 
MAS00769-MAS02319,Multifunction steering wheel control module-Event code 1,0, 
MAS00769-MAS02320,Multifunction steering wheel control module-Event code 2,not coded/not installed, 
MAS00769-MAS02342,Multifunction steering wheel control module-Multifunction steering wheel: variant,2, 
MAS00815-IDE00003,Steering angle sensor-Coding,coded, 
MAS00815-IDE00326,Steering angle sensor-Steering wheel angle,1.487, °
MAS00815-MAS00037,Steering angle sensor-Calibration status,calibrated, 
MAS00815-MAS00370,Steering angle sensor-Vehicle speed,in permissible range, 
MAS00815-MAS02125,Steering angle sensor-Steering wheel angle speed,0.000, °/s
MAS00815-MAS02126,Steering angle sensor-Steering angle sensor: status,initialized, 
MAS00815-MAS02356,Steering angle sensor-Type of calibration,Customer service calibration, 
MAS00815-MAS02357,Steering angle sensor-Vehicle identification,detected, 
MAS00815-MAS02358,Steering angle sensor-Calibration angle,in permissible range, 
MAS00815-MAS02406,Steering angle sensor-Steering wheel angle: internal value,-1.487, °
MAS00815-MAS02453,Steering angle sensor-Steering wheel angle offset,3.019, °
MAS00815-MAS03154,Steering angle sensor-Sleep mode,active, 
ENG106801-ENG101109,GRA in the MFL -E: LIN ADR Distanz,not activated, 
ENG106801-ENG102197,GRA in the MFL -E: LIN Failsafe Mode,No malfunction detected, 
ENG106801-ENG101492,GRA in the MFL -E: LIN Fehler Tiptronic,No malfunction detected, 
ENG106801-ENG101758,GRA in the MFL -E: LIN Geschwindigkeitsregelanlage,not activated, 
ENG106801-ENG102647,GRA in the MFL -E: LIN GRA Cancel,not activated, 
ENG106801-ENG101573,GRA in the MFL -E: LIN GRA Fehler,No malfunction detected, 
ENG106801-ENG100860,GRA in the MFL -E: LIN GRA Minus,not activated, 
ENG106801-ENG103706,GRA in the MFL -E: LIN GRA Plus,not activated, 
ENG106801-ENG101507,GRA in the MFL -E: LIN GRA Resume,not activated, 
ENG106801-ENG103140,GRA in the MFL -E: LIN GRA Set,not activated, 
ENG106801-ENG100452,GRA in the MFL -E: LIN GRA Tip Minus,not activated, 
ENG106801-ENG102234,GRA in the MFL -E: LIN GRA Tip Plus,not activated, 
ENG106801-ENG99423,GRA in the MFL -E: LIN Tip DOWN,not activated, 
ENG106801-ENG102594,GRA in the MFL -E: LIN Tip UP,not activated, 
ENG107609-ENG103938,MFL 2.0: Received signals-E: 2.0 MFL Eventcode 1,0, 
ENG107609-ENG99172,MFL 2.0: Received signals-E: 2.0 MFL Eventcode 2,15, 
ENG107609-ENG102401,MFL 2.0: Received signals-E: 2.0 MFL Lenkradheizung,not activated, 
ENG107609-ENG101133,MFL 2.0: Received signals-E: 2.0 MFL Marke,0, 
ENG107609-ENG102193,MFL 2.0: Received signals-E: 2.0 MFL Status Lenkradheizung,not active, 
ENG107609-ENG102624,MFL 2.0: Received signals-E: 2.0 MFL Tastencode 1,0, 
ENG107609-ENG101091,MFL 2.0: Received signals-E: 2.0 MFL Tastencode 2,255, 
ENG107609-ENG102097,MFL 2.0: Received signals-E: 2.0 MFL Temperatursensor Lenkradheizung,0, 
ENG107609-ENG104214,MFL 2.0: Received signals-E: 2.0 MFL Tip DOWN,not activated, 
ENG107609-ENG102644,MFL 2.0: Received signals-E: 2.0 MFL Tip UP,not activated, 
ENG107609-ENG103105,MFL 2.0: Received signals-E: 2.0 MFL Variante,2, 
ENG107610-ENG102145,MFS 2.0: malfunction-LIN Failsafe Mode,No malfunction detected, 
ENG107610-ENG103742,MFS 2.0: malfunction-MFL Fehler Kommunikation gestört,No malfunction detected, 
ENG107610-ENG100176,MFS 2.0: malfunction-MFL Fehler Lenkradheizung,No malfunction detected, 
ENG107610-ENG102569,MFS 2.0: malfunction-MFL Fehler MFL Steuergerät defekt,No malfunction detected, 
ENG107610-ENG99229,MFS 2.0: malfunction-MFL Fehler Signalhorn,No malfunction detected, 
ENG107610-ENG101420,MFS 2.0: malfunction-MFL Fehler Taste Links,No malfunction detected, 
ENG107610-ENG100884,MFS 2.0: malfunction-MFL Fehler Taste Rechts,No malfunction detected, 
ENG107610-ENG101641,MFS 2.0: malfunction-MFL Fehler Tip Links,No malfunction detected, 
ENG107610-ENG100972,MFS 2.0: malfunction-MFL Fehler Tip Rechts,No malfunction detected, 
ENG107610-ENG100276,MFS 2.0: malfunction-MFL Fehler Vibrationsmotor,ERROR, 
ENG107610-ENG100862,MFS 2.0: malfunction-SMLS MFL Failsafe Mode,No malfunction detected, 
ENG107611-ENG100417,MFS 2.0: transm signals-A: 2.0 MFL Dimmung,0, 
ENG107611-ENG101238,MFS 2.0: transm signals-A: 2.0 MFL Klemme 15,On, 
ENG107611-ENG99169,MFS 2.0: transm signals-A: 2.0 MFL Lenkradheizung,not active, 
ENG107611-ENG100431,MFS 2.0: transm signals-A: 2.0 MFL Lenkradheizung Freigabe,not active, 
ENG107611-ENG99318,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor,OFF, 
ENG107611-ENG104190,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor Anlauf Spannung,0, 
ENG107611-ENG103578,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor Anlauf Zeit,0, 
ENG107611-ENG99897,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor Freigabe,not active, 
ENG107611-ENG102470,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor PWM Signal,0, 
ENG107611-ENG99179,MFS 2.0: transm signals-A: 2.0 MFL Vibrationsmotor Testprozedur,No malfunction detected, 
ENG107370-IDE00326,Steer ang sens (dev.)/Param_ALWSDatenMagne-Steering wheel angle,1.487, °
ENG107370-MAS02125,Steer ang sens (dev.)/Param_ALWSDatenMagne-Steering wheel angle speed,0.000, °/s
ENG107370-ENG100330,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: LWS fehler erkannt,No malfunction detected, 
ENG107370-ENG103972,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: LWS-Daten (LED),1.50, °
ENG107370-ENG100273,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: LWS-Daten (Magnet),3.75, °
ENG107370-ENG99783,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Roh-Daten (LED),01 08, 
ENG107370-ENG99835,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Roh-Daten (Magnet) Hall Spannung A1,2.9569, V
ENG107370-ENG104123,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Roh-Daten (Magnet) Hall Spannung A2,1.3929, V
ENG107370-ENG99515,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Roh-Daten (Magnet) Hall Spannung B1,2.2189, V
ENG107370-ENG100350,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Roh-Daten (Magnet) Hall Spannung B2,2.1163, V
ENG107370-ENG102155,Steer ang sens (dev.)/Param_ALWSDatenMagne-A: Vehicle ident nummer,34 30 36 32, 
ENG109183-ENG99376,Switch Raw Data-Battery Voltage KL. 15,12.50, V
ENG109183-ENG100700,Switch Raw Data-Battery Voltage KL. 30,12.50, V
ENG109183-ENG99341,Switch Raw Data-GRA Hauptschalter digital,OFF, 
ENG109183-ENG101211,Switch Raw Data-GRA Hebel axial ACC (Set),97.24, %
ENG109183-ENG103953,Switch Raw Data-GRA Hebel horizontal (On/Off),0.00, %
ENG109183-ENG102675,Switch Raw Data-GRA Hebel vertikal (Plus/Minus),0.00, %
ENG109183-ENG103457,Switch Raw Data-Linker Hebel axial 1 (FAS),52.54, %
ENG109183-ENG101659,Switch Raw Data-Linker Hebel axial 2 (GRA Set/Rest),52.54, %
ENG109183-ENG99692,Switch Raw Data-Linker Hebel axial 3 (ON/CANCEL/OFF),0.00, %
ENG109183-ENG102304,Switch Raw Data-Linker Hebel horizontal (Licht),52.15, %
ENG109183-ENG102362,Switch Raw Data-Linker Hebel vertikal (Blinker),32.15, %
ENG109183-ENG99547,Switch Raw Data-LS CAN Transceiver error Pin,OFF, 
ENG109183-ENG102405,Switch Raw Data-P_Verriegelt Signal,97.63, %
ENG109183-ENG102126,Switch Raw Data-Rechter Hebel axial  1/2 (MFA Wippe/Reset),61.17, %
ENG109183-ENG100738,Switch Raw Data-Rechter Hebel axial  3 (Intervallstufen),61.17, %
ENG109183-ENG100192,Switch Raw Data-Rechter Hebel horizontal (Heckwischer),61.17, %
ENG109183-ENG100503,Switch Raw Data-Rechter Hebel vertikal (Frontwischer),66.26, %
ENG109183-ENG98906,Switch Raw Data-Signal horn,OFF, 
ENG109183-ENG99625,Switch Raw Data-ZAS KL 15,On, 
ENG109183-ENG100511,Switch Raw Data-ZAS KL 50,OFF, 
ENG109183-ENG103613,Switch Raw Data-ZAS KL S,On,

And the adp codes:
Code:
SW:5K0-953-569-AL   HW:5K0-953-569-AL ---  Steering wheel
Component:LENKS.MODUL   016 0180, Coding:698A000000
EV_VW360SteerWheelUDS,A03004,EV_VW360SteerWheelUDS.rod
Sunday,07,April,2019,12:52:27:55897
VCDS Version: Release 18.9.1 (x64)  Data version: 20190114 DS296.0
VCID: 025D8B523482B487889-8056

ENG99942-p_a_entprellung_bremse_getriebe_can,5 ,1
ENG102413-p_a_grenze_botschaftszaehler,8 ,1
ENG99623-p_a_protokollfehler_max,8 ,1
ENG102990-p_a_ungueltige_vin,3 ,1
ENG102332-p_t_blinker_err_el_kurzschluss,200 ms,1
ENG104011-p_t_blinker_err_el_unterbrechung,1000 ms,1
ENG104185-p_t_blinker_err_gra_haengt_aus,5000 ms,1
ENG100988-p_t_blinker_err_gra_haengt_ein,300 s,1
ENG103202-p_t_blinker_err_lichthupe_haengt_aus,5000 ms,1
ENG100154-p_t_blinker_err_lichthupe_haengt_ein,300 s,1
ENG100923-p_t_blinker_err_unplausibel,200 ms,1
ENG101294-p_t_blinker_sperrzeit,100 ms,1
ENG99467-p_t_cal,110 ms,1
ENG103917-p_t_delta_T_no_ack,100 ms,1
ENG102745-p_t_delta_T_pause,70 ms,1
ENG102505-p_t_elv_fehler,400 ms,1
ENG104033-p_t_entprellzeit_ueberspannung,90000 ms,1
ENG101392-p_t_entprellzeit_unterspannung,90000 ms,1
ENG104097-p_t_err_plaus,250 ms,1
ENG102062-p_t_erste_wartephase,600 ms,1
ENG103576-p_t_ezs_entprellen,200 ms,1
ENG103082-p_t_gra_tip,500 ms,1
ENG104117-p_t_grahebel_err_el_kurzschluss,200 ms,1
ENG102950-p_t_grahebel_err_el_unterbrechung,1000 ms,1
ENG103784-p_t_grahebel_err_gra_haengt_aus,5000 ms,1
ENG102546-p_t_grahebel_err_gra_haengt_ein,300 s,1
ENG103536-p_t_grahebel_err_unplausibel,800 ms,1
ENG101067-p_t_hochlauf,500 ms,1
ENG102496-p_t_hupe_err_hinweis,2000 ms,1
ENG101071-p_t_hupe_err_hupe_haengt_aus,5000 ms,1
ENG101518-p_t_hupe_err_hupe_haengt_ein,60 s,1
ENG101702-p_t_hupe_indien_entprellen,500 ms,1
ENG102167-p_t_kalibrierungswinkel,7.5 °,1
ENG100111-p_t_lin_err_kurzschluss,800 ms,1
ENG103131-p_t_lin_sleepframe_kl15_aus,1000 ms,1
ENG102276-p_t_max_fehlerzähler,5 ,1
ENG101421-p_t_p_verriegelt_err_el_kurzschluss,10 ms,1
ENG101001-p_t_p_verriegelt_err_unplausibel_aus,200 ms,1
ENG103869-p_t_p_verriegelt_err_unplausibel_ein,2000 ms,1
ENG99670-p_t_p_verriegelt_err_unplausibel_in_parkposition_aus,1000 ms,1
ENG102984-p_t_p_verriegelt_err_unplausibel_in_parkposition_ein,30 s,1
ENG100979-p_t_plaus_start,50 ms,1
ENG100741-p_t_s_kontakt_nachlauf,5000 ms,1
ENG99706-p_t_sleep_nwm,20 min,1
ENG100796-p_t_spannung_obere_schwelle,16.5 V,1
ENG102338-p_t_spannung_untere_schwelle,8.5 V,1
ENG104040-p_t_startverzoegerung_lin_kom,100 ms,1
ENG100499-p_t_timeout_eps,500 ms,1
ENG101125-p_t_timeout_esp,500 ms,1
ENG102829-p_t_timeout_gw1,1000 ms,1
ENG103194-p_t_timeout_ident,5 s,1
ENG102951-p_t_waschen_front_bew,500 ms,1
ENG103039-p_t_wischer_err_el_kurzschluss,200 ms,1
ENG101343-p_t_wischer_err_el_unterbrechung,1000 ms,1
ENG101059-p_t_wischer_err_mfa_haengt_aus,5000 ms,1
ENG100346-p_t_wischer_err_mfa_haengt_ein,300 s,1
ENG102807-p_t_wischer_err_unplausibel,200 ms,1
ENG103464-p_t_wischer_err_waschen_haengt_aus,5000 ms,1
ENG100423-p_t_wischer_err_waschen_haengt_ein,300 s,1
ENG99933-p_t_wischer_err_wischen_haengt_aus,5000 ms,1
ENG102586-p_t_wischer_err_wischen_haengt_ein,300 s,1
ENG103607-p_t_wischer_winterstellung,60 s,1
ENG101609-p_t_zss_err_kurzschluss_aus,4 ms,1
ENG100934-p_t_zss_err_kurzschluss_ein,500 ms,1
ENG103636-p_t_zss_err_unterbrechung,500 ms,1
ENG103066-p_w_blinker_nur_bei_kl15,1 ,1
ENG100881-p_w_dimmung_offset,0 ,1
ENG102614-p_w_erkannter_mfl_typ,0 ,1
ENG100328-p_w_fas_nur_bei_kl15,1 ,1
ENG103431-p_w_fernlicht_nur_bei_kl15,1 ,1
ENG103577-p_w_fzggeschw_elv_lock_enable,0.80 km/h,1
ENG99555-p_w_grenze_erkannter_mfl_typ,5 ,1
ENG101288-p_w_helligkeitsfaktor,255 ,1
ENG99174-p_w_mfa_nur_bei_kl15,1 ,1
ENG102080-p_w_mfg_nur_bei_kl15,1 ,1
ENG99469-p_w_mfl_nur_bei_kl15,1 ,1
ENG102551-p_w_waschen_nur_bei_kl15,1 ,1
ENG101120-p_w_wischer_intervall_nur_bei_kl15,1 ,1
ENG100655-p_w_wischer_nur_bei_kl15,1 ,1
ENG99959-p_w_zss_direktansteuerung,0 ,1

There are a bunch of GRA mentioned in there but I am not sure which one to set first to give it a try.
 
  • Like
Reactions: Uwe
   #12  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Nothing jumps out at me in the above maps.

One thing I noticed looking at scans from other cars with similar equipment: They all have Byte 2, bit 2 "Horn only with Terminal 15/Ignition ON active" set. Try setting that bit please?

-Uwe-
 
   #13  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
They all have Byte 2, bit 2 "Horn only with Terminal 15/Ignition ON active" set. Try setting that bit please?

Sorry for the absence.
I will try this as soon as I have time and report back.

Thank you again for all of your tremendous support!
 
   #14  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Ok, @Uwe I tried to coding with the different horn setting.
Sadly it still didn't work.

But, what I just now recognized is, that the control module accepts the coding for "cruise control controlled via separate lever"
O8jud0l.png


It then also gives me an error that i can't reset:


I will try and dig a little deeper to see if there are any other combinations that might work.
 
   #15  

borno

Verified VCDS User
Verified
Joined
Apr 4, 2019
Messages
10
Reaction score
7
Location
USA
VCDS Serial number
C?ID=365795
Eureka!

I think that's what the old greek said in case of a success.

I got lucky at the first shot!
Deactivated byte 0 bit 5 "Button for Driver Assist System installed" and it worked like a charm.
I now have fully functional cruise control and no error codes.
qbTMi32h.png


Thank you all very much for your support!
 
Last edited:
Back
Top