-
Just happened to have scanned the ECU ID on Friday...
Code:
Friday,15,March,2019,20:32:32:27520
VCDS Version: Release 18.9.1 (x64)
Address 01: Engine
Control Module Part Number: 8T2 907 560 F
Component and/or Version: 4.2l JHM.9X/ H04 0005
Software Coding: 1A25003225C6080D3000
Work Shop Code: WSC 00000
VCID: 3FDBBD3337FB04FFA77-806A
Advanced Identification/FAZIT
Identification: BPG-810
Revision: NAH04---
Date: 14.02.13
Manufacturer number: 1328
Test stand number: 0017
Flash Status
Programming Attempts(application): 0/0/0/0/0
Successful Attempts(application): 0/0/0/0/0
Flash Date: 00.00.00
Misc.
Hardware number: 8T1 907 560
Workshop System Name: -----
ASAM Dataset: EV_ECM42FSI0118T2907560F
ASAM Dataset Revision: 001004
Car Info
Chassis Number: WUAC6AFR6DA902467
Engine code: CFSA
VCDS Info:
VCID: 3FDBBD3337FB04FFA77-806A
Labels: 079-907-560-CFS.clb
Readiness: No script available
ROD: EV_ECM42FSI0118T2907560F.rod
-
Benevolent Dictator
So the data type for IDE00565 in EV_ECM42FSI0118T2907560F is "OBD", and it corresponds to PID PID 52/0x34, which calls for the display of "Fuel–Air Equivalence Ratio (lambda) and Oxygen Sensor Current".
See chart here:
https://en.wikipedia.org/wiki/OBD-II_PIDs#Service_01
I'm not sure why older versions didn't show the current. I've checked previous versions back to to DS251 and the data type has not changed. Eric has also looked at the VCDS source and hasn't found any relevant changes. So the only thing we can think of is that your ECU's ASAM ID may have changed between the 0002 software version you had in the first log that you posted and the 0005 version in the second log that you posted. Do you have any scans that show your ECU's ASAM ID with the 0002 software in it?
If you'd like to split the two values into separate columns, I'd suggest a find & replace in that column, to replace the slash with a comma.
-Uwe-
Last edited by Uwe; 03-21-2019 at 10:34 AM.
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
Post Thanks / Like - 2 Likes
-
I'll look as I have more than a few scans saved. And thanks for the tip. Can't stand excel but I'm sure I can figure how to do a find and replace.
-
Here's an old one.
Code:
Thursday,11,January,2018,21:43:56:27520
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 17.8.1.0 (x64) HEX-V2 CB: 0.4407.4
Data version: 20171130 DS276.6
www.Ross-Tech.com
VIN: WUAC6AFR6DA902467 License Plate:
Mileage: 63530km-39475mi Repair Order:
Chassis Type: FR-AU48 (8R0)
Scan: 01 02 03 05 06 08 09 13 15 16 17 19 1B 22 36 3C 42 44 46 47
52 53 56 5F 6C
VIN: WUAC6AFR6DA902467 Mileage: 63530km-39475miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
06-Seat Mem. Pass -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
1B-Active Steering -- Status: OK 0000
22-AWD -- Status: OK 0000
36-Seat Mem. Drvr -- Status: Malfunction 0010
3C-Lane Change -- Status: Malfunction 0010
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (------CFSA) Labels:. 079-907-560-CFS.clb
Part No SW: 8T2 907 560 B HW: 8T1 907 560
Component: 4.2l V8HDZ / H04 0004
Revision: NAH04---
Coding: 1A25003225C6080D3000
Shop #: WSC 06208 000 00000
ASAM Dataset: EV_ECM42FSI0118T2907560B 001005
ROD: EV_ECM42FSI0118T2907560B.rod
VCID: 3B23C92323E318DF4F3-806E
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 02: Auto Trans (J217) Labels:| 0B5-927-156.clb
Part No SW: 8T0 927 156 F HW: 0B5 927 156 J
Component: 0B5 42 FSINAR H01 0008
Revision: --H01---
Coding: 000001
Shop #: WSC 06325 000 00000
ASAM Dataset: EV_TCMDL501021 001012
ROD: EV_TCMDL501021.rod
VCID: 40D9BECF4A057B071A1-8014
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 8K0-907-379-V1.clb
Part No SW: 8T0 907 379 F HW: 8T0 907 379 F
Component: ESP8 quattro H09 0100
Revision: -------- Serial number: --------------
Coding: 302D1A
Shop #: WSC 06325 000 00000
VCID: 45D7AFDB55A75E2F297-8010
No fault code found.
-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J393) Labels:. 8K0-907-064-05.clb
Part No SW: 8K0 907 064 GP HW: 8K0 907 064 FP
Component: BCM2 2.0 H12 0633
Revision: 00002001
Coding: 0D804000000000000000
Shop #: WSC 06325 000 00000
VCID: 045172DF1E1DA7277E9-8050
Subsystem 1 - Part No SW: 8K0 905 852 E HW: 8K0 905 852 E
Component: J764 ELV MLB H40 0046
Serial number: 2313000016339008
No fault code found.
-------------------------------------------------------------------------------
Address 06: Seat Mem. Pass (J521) Labels:. 8T0-959-760.clb
Part No SW: 8T0 959 760 E HW: 8T0 959 760 E
Component: MEM-BFS H10 0076
Revision: AA000000 Serial number: 00000051213831
Coding: 00037025002C00000000
Shop #: WSC 06342 000 00000
VCID: 45D7AFDB55A75E2F297-8010
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: Redir Fail!
Part No SW: 8K1 820 043 T HW: 8K1 820 043 T
Component: KLIMA 3 ZONEN H04 0121
Revision: C1000000 Serial number: 01200220130492
Coding: 4802200000
Shop #: WSC 06325 000 00000
VCID: 392FD32B295F2ACF5DF-806C
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 8K0-907-063.clb
Part No SW: 8K0 907 063 DJ HW: 8K0 907 063 DJ
Component: BCM1 1.0 H16 0103
Revision: 09016001 Serial number: 00000554864301
Coding: 06000011043C9FF235004083000039090F9CD388A2090221000008004000010200040034000000
Shop #: WSC 92630 444 123950
VCID: 7AAD0C276CD9E1D7145-802E
Subsystem 1 - Part No SW: 8T1 955 119 D HW: 8J1 955 119 Labels: 1KX-955-119.CLB
Component: WWS 150213 H15 0080
Serial number: SWF13020150148
Coding: 00FD11
Subsystem 2 - Part No SW: 8U0 955 559 B HW: 8U0 955 559 B Labels: 8U0-955-559.CLB
Component: G397_RLFS H06 0002
Serial number: 21004112
Coding: 02005D
Subsystem 3 - Part No SW: 8K0 941 531 AQ HW: 8K0 941 531 AQ
Component: E1 - LDS H03 0031
Serial number: 00000000000502130647
Subsystem 4 - Part No SW: 4G0 907 410 A HW: 4H0 907 410 A
Component: USHL4.2 H30 0030
Serial number: 0000002274555R4SYJ02
Subsystem 5 - Part No SW: 8K5 941 329 HW: 8K5 941 329
H01 0031
Subsystem 6 - Part No SW: 8K5 941 329 HW: 8K5 941 329
H01 0031
Subsystem 7 - Part No SW: 4H0 907 658 HW: 4H0 907 658
Component: AQ_Hum_Sensor H03 0003
Serial number: 7C48C296000000000001
No fault code found.
-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428) Labels: None
Part No SW: 8K0 907 561 C HW: 8K0 907 561 C
Component: ACC3 H11 0100
Serial number: 00000000000000
Coding: 00333E
Shop #: WSC 06325 000 00000
VCID: 323DE407F429D9979C5-8066
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 8K0-959-655.clb
Part No SW: 8K0 959 655 P HW: 8K0 959 655 P
Component: AirbagVW-AU10 H45 0610
Serial number: 003KJD91EW3S
Coding: 303343334830303030304A55304C38543053
Shop #: WSC 06325 000 00000
ASAM Dataset: EV_AirbaECUVWAUDI010 003010
ROD: EV_AirbaECUVWAUDI010_003_AU48.rod
VCID: 4ACD9CE77C39B157C45-801E
Seat occupied recognition:
Subsystem 1 - Part No SW: 8K0 959 339 A HW: 8K0 959 339 A
Component: BF-Gewichtss. H02 0060
Serial number: 5810000R130000CJ7S
Crash sensor for side airbag: driver side:
Serial number: 6334MSME780331656
Crash sensor for side airbag: front passenger side:
Serial number: 6344MSME78406157C
Crash sensor for side airbag: rear: driver side:
Serial number: 6352QSME62282B44G
Crash sensor for side airbag: rear: passenger side:
Serial number: 6362QSME5F2C5372T
Crash sensor for front airbag: driver side:
Serial number: 63732SME712B0F585
Crash sensor for front airbag: front passenger side:
Serial number: 63832SME542B2F444
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels:. 8K0-953-568.clb
Part No SW: 8R0 953 568 S HW: 8R0 953 568 S
Component: Lenks.Modul H07 0171
Revision: 00000000 Serial number: 20130219001040
Coding: 00003E
Shop #: WSC 06325 000 00000
VCID: 51FF8B8B91EF828F85F-8004
Component: E221 - MFL H03 0004
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:. 8T0-920-xxx-17.clb
Part No SW: 8T0 920 984 A HW: 8T0 920 984 A
Component: KOMBIINSTR. H35 0556
Revision: 00300000 Serial number: UVA266K2E
Coding: 83BF0100AF03D705020000
Shop #: WSC 06325 000 00000
VCID: 3D27C73B3D7716EF717-8068
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 8T0-907-468.clb
Part No SW: 8R0 907 468 P HW: 8R0 907 468 D
Component: GW-BEM 5CAN-M H11 0055
Revision: 1Z100027 Serial number: 2741Z13204008E
Coding: 80E3031600
Shop #: WSC 06325 000 00000
VCID: 4CC19AFF76CDAF67F69-8018
Subsystem 1 - Part No SW: 8T0 915 181 HW: 8T0 915 181
Component: J367-BDMHella H03 8041
Serial number: 1367620003
No fault code found.
-------------------------------------------------------------------------------
Address 1B: Active Steering (J792) Labels: None
Part No SW: 8K0 907 144 J HW: 8K0 907 144 J
Component: DYNAMIKLENK. H06 0690
Revision: 52001005 Serial number: --------------
Coding: 030000
Shop #: WSC 06325 000 00000
VCID: 3635D8171841C5B7B0D-8062
No fault code found.
-------------------------------------------------------------------------------
Address 22: AWD (J492) Labels: 8K0-907-163.clb
Part No SW: 8K0 907 163 B HW: 8K0 907 163 A
Component: 4 Wheel Drive H14 0100
Serial number: 001302130001758
ASAM Dataset: EV_AllWheelDiffeQSPCAN 003019
ROD: EV_AllWheelDiffeQSPCAN.rod
VCID: 2F3BED73E79BF47FF3B-807A
No fault code found.
-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr (J136) Labels:. 8T0-959-760.clb
Part No SW: 8T0 959 760 E HW: 8T0 959 760 E
Component: MEM-FS H10 0076
Revision: AA000000 Serial number: 00000051211560
Coding: 001B7B25002C00000000
Shop #: WSC 11251 001 1048576
VCID: 45D7AFDB55A75E2F297-8010
3 Faults Found:
03339 - Force Limit for Fore/Aft Seat Adjustment: Back
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 3
Fault Frequency: 1
Reset counter: 34
Mileage: 59658 km
Time Indication: 0
Date: 2017.10.26
Time: 22:55:48
03321 - Switch for Height Adjustment: Down
003 - Mechanical Failure - Intermittent
Freeze Frame:
Fault Status: 00100011
Fault Priority: 4
Fault Frequency: 1
Reset counter: 223
Mileage: 63390 km
Time Indication: 0
Date: 2018.01.08
Time: 14:07:49
03325 - Switch for Backrest Angle Adjustment: Back
003 - Mechanical Failure - Intermittent
Freeze Frame:
Fault Status: 00100011
Fault Priority: 4
Fault Frequency: 1
Reset counter: 223
Mileage: 63390 km
Time Indication: 0
Date: 2018.01.08
Time: 14:07:49
-------------------------------------------------------------------------------
Address 3C: Lane Change (J769) Labels:| 5Q0-907-566.clb
Part No SW: 8T0 907 566 B HW: 8T0 907 566 B
Component: SWA Master H04 0060
Serial number: 0192285845
Coding: 010211
Shop #: WSC 06324 000 00000
ASAM Dataset: EV_LaneChangAssis 001020
ROD: EV_LaneChangAssis_AU21.rod
VCID: 3FDBBD3337FB04FF63B-806A
Lane Change Assistant 2:
Subsystem 1 - Part No SW: 8T0 907 568 B HW: 8T0 907 568 B
Component: SWA Slave H04 0060
Serial number: 0192294703
Coding: 000102
1 Fault Found:
733696 - Control Module 2 for Lane-Change Assist
C1115 F5 [008] - Limited Visibility
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 61628 km
Date: 2017.12.07
Time: 17:51:39
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels:. 8K0-959-793.clb
Part No SW: 8T0 959 793 P HW: 8T0 959 793 G
Component: TSG FA H09 0304
Revision: -------- Serial number: --------------
Coding: 011C13224E00120102
Shop #: WSC 06325 000 00000
VCID: 56F57897B801E5B750D-8002
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 8K0-909-144.clb
Part No SW: 8K0 909 144 F HW: 8K0 909 144 B
Component: RCEPS H36 0507
Revision: 00001000 Serial number: 0012646993
Coding: 010000010001
Shop #: WSC 06324 000 00000
ASAM Dataset: EV_RCEPSAU48X 008014
ROD: EV_RCEPSAU48X_008.rod
VCID: 3431E21F0EBDD7A78E9-8060
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. (J393) Labels:. 8K0-907-064-46.clb
Part No SW: 8K0 907 064 GP HW: 8K0 907 064 FP
Component: BCM2 2.0 H12 0633
Revision: 00002001 Serial number: 0301332569
Coding: 0106069A00FAC10581B0003200000000
Shop #: WSC 92630 444 123950
VCID: 045172DF1E1DA7277E9-8050
Subsystem 1 - Part No SW: 8K0 959 719 B HW: 8K0 959 719
Component: GTO BF H01 0080
Serial number: 00000000000000634856
Subsystem 2 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Subsystem 3 - Part No SW: 8R0 959 591 A HW: 8R0 959 591
Component: J245EE20SKB13 H05 0220
Serial number: 0123456789ABCDEFGHIJ
Subsystem 4 - Part No SW: 4G8 959 252 HW: 4G8 959 252
Component: HSP-SG H11 0028
Serial number: WA104645000002650945
No fault code found.
-------------------------------------------------------------------------------
Address 47: Sound System (J525) Labels:. 8T0-035-223-BOM.clb
Part No SW: 8T1 035 223 A HW: 8T1 035 223 A
Component: DSP Prem H05 0030
Revision: 00005001 Serial number: 94813011143102
VCID: 2D07F77BED17866FC17-8078
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels:. 8K0-959-792.clb
Part No SW: 8T0 959 792 P HW: 8T0 959 792 G
Component: TSG BF H09 0304
Revision: -------- Serial number: --------------
Coding: 011C13224E00120102
Shop #: WSC 06325 000 00000
VCID: 55F77F9BA507EEAF597-8000
No fault code found.
-------------------------------------------------------------------------------
Address 53: Parking Brake (----) Labels: 8K0-907-801-V2.clb
Part No SW: 8K0 907 801 L HW: 8K0 907 801 J
Component: EPB-4 H01 0003
Revision: -------- Serial number: 20000000227161
ASAM Dataset: EV_ParkiBrake 001027
ROD: EV_ParkiBrake_VW51.rod
VCID: 3829D62F12D533C7A21-806C
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (R) Labels: Redir Fail!
Part No SW: 4G0 035 082 E HW: 4G0 035 082
Component: Radio U SIRIU H60 0121
Revision: AB001007 Serial number: 156B50D7693479
Coding: 020007010000000001
Shop #: WSC 06325 000 00000
VCID: 221D1447A4C949176C5-8076
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:. 4E0-035-6xx-5F.clb
Part No SW: 8R1 035 746 C HW: 8R1 035 746 B
Component: H-BNT-NA H44 0624
Revision: -------- Serial number: 204BT0D7561283
Coding: 150200020306A9EF75028B4E00000403140000000000000000
Shop #: WSC 92630 444 123950
VCID: 372BD5131F4B3CBFABB-8062
Subsystem 1 - Part No: 8R0 060 884 BA
Component: NAR 2013 0703
Subsystem 2 - Part No SW: 8R0 919 604 A HW: 8R0 919 604 A
Component: DU7 High H42 0104
Serial number: A130BX0D2659970
Subsystem 3 - Part No SW: 8T0 919 611 L HW: 8T0 919 611 C
Component: E0380 Bedient H02 0030
Serial number: 00000001419689
Subsystem 4 - Part No: 8R0 060 961 E
Component: CD-Database 4949
No fault code found.
-------------------------------------------------------------------------------
Address 6C: Back-up Cam. Labels: 8T0-907-441.clb
Part No SW: 8T0 907 441 C HW: 4L0 907 441 B
Component: J772__Rearview 0040
Revision: --H07--- Serial number: 525PA8-J2Z91FG
Coding: 1021008
Shop #: WSC 06325 000 00000
VCID: 3829D62F1E5533C7A21-806C
No fault code found.
End----------(Elapsed Time: 01:57, VBatt start/end: 12.1V/12.0V)-----------
-
Benevolent Dictator
Originally Posted by
Ape Factory
Here's an old one.
[code]
Address 01: Engine (------CFSA) Labels:. 079-907-560-CFS.clb
Part No SW: 8T2 907 560 B HW: 8T1 907 560
Component: 4.2l V8HDZ / H04 0004
Revision: NAH04---
Coding: 1A25003225C6080D3000
Shop #:
WSC 06208 000 00000
ASAM Dataset: EV_ECM42FSI0118T2907560B 001005
ROD: EV_ECM42FSI0118T2907560B.rod
VCID: 3B23C92323E318DF4F3-806E
No fault code found.
Readiness: 0000 0000
Well, that's not the 0002 software in your first log, but it solves the mystery anway.
Your ECU software part number has changed, and so has the ASAM identifier.
And guess what, that older ECU software had two separate values that could be logged:
IDE00565-MAS04135 --0 Current of oxygen sensor bank 2 sensor 1 (broadband sensor) - Oxygen sensor value,LINEAR,lambda
and
IDE00565-MAS04136 -- Current of oxygen sensor bank 2 sensor 1 (broadband sensor) - Current,LINEAR,mA
Whereas your new ECU software only has:
IDE00565-ENG167462 -- Current of oxygen sensor bank 2 sensor 1 (broadband sensor),OBD,
So the difference is in the software in your ECU, as opposed to something that has changed in VCDS. 
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
Post Thanks / Like - 2 Likes
-
Huh, I checked with the calibration engineer just to make sure and he states nothing was changed in the communication with the com lines. I'll double check with him.
Also, is there any way to have the logging function automatically change the file name each and every time? I did a bunch of logging only to have it all overwritten as the same file name is being chosen by the software. I'm logging completely different parameters but it's the same name each and every time regardless. When working quickly, this would be a huge benefit.
Another suggestion is when you save a group of logging parameters that it also saves the "turbo" mode option as well as the UDS grouping/time stamp if checked when saving a group of parameters.
It's extremely tough to work quickly with the VCDS logging feature when you're constantly having to change one character or having to check a bunch of small boxes. Automation is your friend.
-
Benevolent Dictator
Originally Posted by
Ape Factory
Huh, I checked with the calibration engineer just to make sure and he states nothing was changed in the communication with the com lines. I'll double check with him.
There's nothing to double check. The software part number of your ECU changed, as did its ASAM identifier. It's all there in black and white. 
Originally Posted by
Ape Factory
Also, is there any way to have the logging function automatically change the file name each and every time? I did a bunch of logging only to have it all overwritten as the same file name is being chosen by the software. I'm logging completely different parameters but it's the same name each and every time regardless.
I'm a bit puzzled why that would happen if you're logging "completely different parameters". Also, I don't think logs ever get overwritten; if the same file name is used, new data should be appended to the existing data in the file.
Originally Posted by
Ape Factory
Another suggestion is when you save a group of logging parameters that it also saves the "turbo" mode option as well as the
UDS grouping/time stamp if checked when saving a group of parameters.
That's not a bad idea.
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
I would literally jump with joy if that could be implemented. The interface aspect and logistics of logging, as it now stands, are tedious and it makes it hard when you're using a small, lightweight laptop like I am. Battery lasts forever and it's cheap, so it makes a good VCDS-only tool. But it's also super hard to see anything when it's in the seat next to you and as mentioned, tedious to get everything right.
It's so easy to forget to check or uncheck one box, to rename the file, etc... I literally overwrote a ton of really valuable data today due to the fact it doesn't automatically rename a file or at least warn you the data is being overwritten.
In addition, I'd suggest, from a graphics point of view, to make the "buttons" or boxes bigger. Heck, make the whole logging window larger or even make it expandable to full screen mode. If looking at the computer, in the car, there are times where I can't even see if it says start or stop. Big buttons with larger text would be super helpful from an interface standpoint.
Appreciate you're receptive to this!
-
Benevolent Dictator
Originally Posted by
Ape Factory
I literally overwrote a ton of really valuable data today due to the fact it doesn't automatically rename a file or at least warn you the data is being overwritten.
Again, I do not think logs are ever overwritten; if the file name is the same, new data gets appended to an existing file.
Originally Posted by
Ape Factory
In addition, I'd suggest, from a graphics point of view, to make the "buttons" or boxes bigger. Heck, make the whole logging window larger or even make it expandable to full screen mode. If looking at the computer, in the car, there are times where I can't even see if it says start or stop. Big buttons with larger text would be super helpful from an interface standpoint.
Have you adjusted the Window Size here?
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
Post Thanks / Like - 1 Likes
-
Ah didn't realize you could do that! I'll try that for the window size.
As for the files being overwritten, I'm closing out each log. So if I'm logging the transmission, I'll do that, stop it, close it out and open the ECU and then log. Same file name but totally different parameters being logged.
Now if I'm logging the same parameters over again, and I hit resume, yes, it's being appended. But I checked my files and only one log appeared when I had recorded six different logs previously. If the coding saved each file via the date and time, that would prevent files from being overwritten.
Reply With Quote