Hi!
Our 2010 A5 888 2.0 tfsi engine just lost power, ESP is on mil on and off.
Vcds says misfire on cylinder 3 P0303 Misfire Detected
Engine got no power and got a bad smell and smoke of fuel from the exhaust
Engine does not start up easy, shakes/does not run smooth, and feels and sounds like one cylinder is dead.
Strange thing, I cleared the codes just to confirm fault in no 3.
Now there no codes at all but engine still hard to start, shakes/vibrates, sounds like it’s only on 3 and there that massive smoke smelling fuel from the exhaust.
I’m thinking more and more in faulty / stuck open injector, but how to confirm if and which one(s)?
or am i lost/wrong as usual?
this is Engine scan first time, when there were codes precent
Our 2010 A5 888 2.0 tfsi engine just lost power, ESP is on mil on and off.
Vcds says misfire on cylinder 3 P0303 Misfire Detected
Engine got no power and got a bad smell and smoke of fuel from the exhaust
Engine does not start up easy, shakes/does not run smooth, and feels and sounds like one cylinder is dead.
Strange thing, I cleared the codes just to confirm fault in no 3.
Now there no codes at all but engine still hard to start, shakes/vibrates, sounds like it’s only on 3 and there that massive smoke smelling fuel from the exhaust.
I’m thinking more and more in faulty / stuck open injector, but how to confirm if and which one(s)?
or am i lost/wrong as usual?
this is Engine scan first time, when there were codes precent
Code:
Address 01: Engine Labels: 06H-907-115-CAB.clb
Control Module Part Number: 8K2 907 115 AJ HW: 8K2 907 115 D
Component and/or Version: 2.0l R4/4V TF H15 0002
Software Coding: 0114000C240F0160
Work Shop Code: WSC 52341 002 1048576
ASAM Dataset: EV_ECM20TFS0118K2907115AJ 001002 (AU48)
ROD: EV_ECM20AVS.rod
VCID: 77F9D27DCE9910F2EC-8022
3 Faults Found:
4060 - Cylinder 3
P0303 00 [101] - Misfire Detected
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 129246 km
Date: 2019.03.08
Time: 17:52:39
Engine speed: 1390.00 /min
Normed load value: 42.0 %
Vehicle speed: 26 km/h
Coolant temperature: 61 °C
Intake air temperature: 7 °C
Ambient air pressure: 940 mbar
Voltage terminal 30: 13.169 V
Unlearning counter according OBD: 77
7960 - Cylinder Disabling
P130A 00 [032] - -
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 129247 km
Date: 2019.03.08
Time: 17:53:46
Engine speed: 797.00 /min
Normed load value: 23.9 %
Vehicle speed: 5 km/h
Coolant temperature: 64 °C
Intake air temperature: 10 °C
Ambient air pressure: 940 mbar
Voltage terminal 30: 13.334 V
Unlearning counter according OBD: 40
4051 - Random/Multiple Cylinder Misfire Detected
P0300 00 [101] - -
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 129246 km
Date: 2019.03.08
Time: 17:52:35
Engine speed: 1982.50 /min
Normed load value: 45.5 %
Vehicle speed: 25 km/h
Coolant temperature: 61 °C
Intake air temperature: 8 °C
Ambient air pressure: 940 mbar
Voltage terminal 30: 13.264 V
Unlearning counter according OBD: 77
Readiness: 0000 0000