Results 1 to 10 of 10

Thread: Fuel Pump Priming

  1. #1
    Verified VCDS User
    Join Date
    Feb 2019
    Location
    USA
    Posts
    3
    Post Thanks / Like

    Fuel Pump Priming

    This is my first time using VCDS and I was trying to prime the fuel pumps. I went to the Engine Control Module -- Basic Settings -- Group Code 035. There is nothing showing this is the fuel pumps and the drop down is greyed out with "No documentation available." The four boxes after "Go!" show "0/min" "12.01V" "47.7C" "62.1C"
    If I hit the On button it sounds like both fuel pumps are turned on. It't just not looking like all the youtubes I've come across.

    Any tips? Thanks.
    2012 Audi A3 TDI.

    Code:
    Sunday,24,February,2019,08:34:26:34899
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64)  HEX-V2 CB: 0.4437.4
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    VIN: WAUBJAFM6CA058955   License Plate: 
    
    
    Chassis Type: FM-AU35 (7N0)
    Scan: 01 02 03 08 09 0F 15 16 17 19 25 42 44 46 47 4C 52 56 62 72
              77
    
    VIN: WAUBJAFM6CA058955   Mileage: 54560km-33902miles
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    0F-Digital Radio -- Status: Malfunction 0010
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: Malfunction 0010
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    47-Sound System -- Status: OK 0000
    4C-Tire Pressure II -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    62-Door, Rear Left -- Status: OK 0000
    72-Door, Rear Right -- Status: OK 0000
    77-Telephone -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine (CBE)       Labels: None
       Part No SW: 03L 997 030 A    HW: 03L 906 019 EJ
       Component: R4 2.0l TDI G000AG  9983  
       Revision: 12H14---    Serial number: AUX7Z0K8FNJ0HS
       Coding: 0050078
       Shop #: WSC 25190 002 1048576
       VCID: 2C0106753A03B257125-8078
    
    No fault code found.
    Readiness: 0 0 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans        Labels: 02E-927-770.clb
       Part No SW: 02E 300 057 A    HW: 02E 927 770 AL
       Component: GSG DSG AG6     511 9334  
       Revision: 05351113    Serial number: 00001109062126
       Coding: 0000020
       Shop #: WSC 06314 000 00000
       VCID: 176BC9999385218F4F7-8042
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels:. 1K0-907-379-60EC1F.clb
       Part No SW: 1K0 907 379 BJ    HW: 1K0 907 379 BJ
       Component: ESP MK60EC1   H31 0121  
       Revision: 00H31001    
       Coding: 1150400F49270002881402E9921E0042BF0C00
       Shop #: WSC 06314 000 00000
       VCID: 7BA3F52983EDE5EFCBF-802E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8P0-820-043.lbl
       Part No SW: 8P0 820 043 BN    HW: 8P0 820 043 BN
       Component: KlimavollautomatH09 0180  
       Revision: 000630      Serial number: 8P0820043BN   
       Shop #: WSC 00000 000 00000
       VCID: 79AFEF2185D1D7FFD93-802C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 8P0-907-063.clb
       Part No SW: 8P0 907 063 Q    HW: 8P0 907 063 Q
       Component: BCM PQ35  M   110 0719  
       Revision: 00110 AF    
       Coding: 6E000A0FA01336E4287241E00000054D401A60AA104DC128E40008800040
       Shop #: WSC 25190 002 1048576
       VCID: 42DD48CDA4875427C89-8016
    
       Subsystem 1 - Part No SW: 8P1 955 119 F    HW: 8P1 955 119 F  Labels: 1KX-955-119.CLB
       Component: Wischer AU350  H11 0050 
       Coding: 00DD13
    
       Subsystem 2 - Part No: 1K8 951 605 B
       Component: LIN BACKUP HO  H11 9005 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 0F: Digital Radio        Labels: 8E0-035-593-SIR.lbl
       Part No SW: 8E0 035 593 P    HW: 8E0 035 593 P
       Component: SDAR SIRIUS     H07 0160  
       Revision: 00000000    Serial number: AUZ4Z7L0603175
       Coding: 0000100
       Shop #: WSC 06314 000 00000
       VCID: 3635241DF44FF887741-8062
    
    1 Fault Found:
    02635 - Tuner Not Enabled/Activated 
                000 -  - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 7
                        Fault Frequency: 1
                        Reset counter: 69
                        Mileage: 54536 km
                        Time Indication: 0
                        Date: 2019.02.23
                        Time: 11:05:03
    
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:* 8P0-959-655-10.clb
       Part No SW: 8P0 959 655 Q    HW: 8P0 959 655 Q
       Component: Airbag AU1042 H09 0250  
       Revision: --------    Serial number: 003FC001J80F
       Coding: 303142393041303030374A55304C38503053
       Shop #: WSC 06314 000 00000
       ASAM Dataset: EV_Airba10AURB4 001001
       ROD: EV_Airba10AURB4.rod
       VCID: 50F972857A6BB6B74ED-8004
    
       Seat occupied recognition: 
       Subsystem 1 - Part No SW: 8P0 910 339 C    HW: 8P0 959 339 C
       Component: BF-Gewichtss.  H02 0030 
       Serial number: 5810000R0000005UUN
       Coding: 000000
    
       Crash sensor for side airbag: driver side: 
       Serial number: 3572DRB40000DFA47260
    
       Crash sensor for side airbag: front passenger side: 
       Serial number: 3582DRB40000DFE05A34
    
       Crash sensor for side airbag: rear: driver side: 
       Serial number: 35128RB400006527990D
    
       Crash sensor for side airbag: rear: passenger side: 
       Serial number: 35228RB40000641E86ET
    
       Crash sensor for front airbag: driver side: 
       Serial number: 35547RB4000065F388F/
    
       Crash sensor for front airbag: front passenger side: 
       Serial number: 35647RB4000065F4FF75
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 8P0-953-549.lbl
       Part No SW: 8P0 953 549 K    HW: 8P0 953 549 K
       Component: J0527           H37 0070  
       Coding: 0014042
       Shop #: WSC 06314 000 00000
       VCID: 46D554DD84AF6807E41-8012
    
       Subsystem 1 - Part No: XXXXXXXXXXX 
       Component: E0221           H02 0100
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8P0-920-xxx-17-MY8.clb
       Part No SW: 8P0 920 983 D    HW: 8P0 920 983 D
       Component: KOMBIINSTR. VDO H02 0150  
       Revision: D0H02002    Serial number: 2248K002001503
       Coding: 0272288
       Shop #: WSC 16736 002 1048576
       VCID: 3B233529CF6D25EF8BF-806E
    
    1 Fault Found:
    00003 - Control Module 
                005 - No or Incorrect Basic Setting / Adaptation
                 Freeze Frame:
                        Fault Status: 01100101
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 255
                        Mileage: 49547 km
                        Time Indication: 0
                        Date: 2018.10.01
                        Time: 11:22:36
    
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:. 7N0-907-530-V2.clb
       Part No SW: 7N0 907 530 H    HW: 1K0 907 951 
       Component: J533  Gateway H42 1620  
       Revision:   H42       Serial number: 280811F1001626
       Coding: 352102
       Shop #: WSC 06314 000 00000
       VCID: 35372311E549F39F7DB-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No SW: 8P0 920 983 D    HW: 8P0 920 983 D
       Component: KOMBIINSTR. VDO H02 0150  
       Revision: D0H02002    Serial number: AUX7Z0K8FNJ0HS
       Shop #: WSC 44231 000 1048576
       VCID: 3B233529CF6D25EF8BF-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels: 8P0-959-801-MIN3.lbl
       Part No SW: 8P0 959 801 Q    HW: 8P0 959 801 Q
       Component: Tuer-SG         H04 0101  
       Coding: 0001205
       Shop #: WSC 06314 000 00000
       VCID: 49CF5FE195B1877F093-801C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1K0-909-14x-GEN3.clb
       Part No: 1K0 909 144 M
       Component: EPS_ZFLS Kl. 232    3201  
       Revision: 00H20000    
       Shop #: WSC 02069 000 90108
       VCID: 34311E15E233EA974A5-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 47: Sound System        Labels: 8Px-035-382.lbl
       Part No SW: 8P4 035 382 E    HW: 8P4 035 382 E
       Component: AB2 SUBWOOFERBOXH07 0180  
       Revision: 00006       Serial number: 92158124231624
       Shop #: WSC 00000 000 00000
       VCID: 3635241DF44FF887741-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels:. 1K0-959-702-MIN3.clb
       Part No SW: 8P0 959 802 Q    HW: 8P0 959 802 Q
       Component: Tuer-SG         H04 0101  
       Coding: 0001205
       Shop #: WSC 06314 000 00000
       VCID: 4ACD60ED90B78C67009-801E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8J0-035-1xx-56.clb
       Part No SW: 8P0 035 186 AC    HW: 8P0 035 186 AC
       Component: R Concert2+     H05 0293  
       Revision: 00H05000    Serial number: AUZ1Z3L2599309
       Coding: 0750112
       Shop #: WSC 06314 000 00000
       VCID: 73B3DD09A7BDADAF93F-8026
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels: 8P4-959-801.lbl
       Part No SW: 8P4 959 801 F    HW: 8P4 959 801 F
       Component: Tuer-SG         H04 0050  
       Coding: 0001168
       Shop #: WSC 06314 000 1012544
       VCID: 42DD48CDA8875427C89-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels: 8P4-959-802.lbl
       Part No SW: 8P4 959 802 F    HW: 8P4 959 802 F
       Component: Tuer-SG         H04 0050  
       Coding: 0001168
       Shop #: WSC 06314 000 1012544
       VCID: 43D34DC9B79D5D2FC3F-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 77: Telephone        Labels: 8P0-862-335.lbl
       Part No SW: 8P1 862 336 A    HW: 8P1 862 336 
       Component: FSE_256x BT     H44 0660  
       Revision: 00000000    Serial number: 00000005158243
       Coding: 0001277
       Shop #: WSC 06314 000 00000
       VCID: 3635241DF44FF887741-8062
    
    No fault code found.
    
    End----------(Elapsed Time: 01:19, VBatt start/end: 12.2V/12.2V)-----------

  2. Likes Dana liked this post
  3. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,510
    Post Thanks / Like
    Blog Entries
    1
    I'm reasonably confident that's right.
    It seems the label file is not loading due to the newer -997- fixfail software your ECU has in it.

    Ignition ON / Engine OFF.
    Test Duration ca. 30 Seconds
    Required after Repairs where the Fuel System was drained.
    After extensive repairs such as Injector Replacement and/or Fuel System Flushing, this Process should be repeated at least 3 Times.
    There must be NO open Fuel Supply Lines!


    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  4. Likes PetrolDave, Dana, billywhizz liked this post
  5. #3
    Verified VCDS User
    Join Date
    Feb 2019
    Location
    USA
    Posts
    3
    Post Thanks / Like
    Thanks. I tried it, but the pumps didnít stop at 30 seconds. So I manually stopped it and repeated that 30 second interval 3 more times. The car started right up.

  6. #4
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Latvia
    Posts
    106
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    I'm reasonably confident that's right.
    It seems the label file is not loading due to the newer -997- fixfail software your ECU has in it.
    -Uwe-
    What is chain of finding correct label file in this situation?
    I now know that SW number is checked first.

    Code:
    03L-997-030-A
    03L-997-030  
    03L-906-019-EJ
    03L-906-019
    or

    Code:
    03L-997-030-A
    03L-906-019-EJ
    03L-997-030  
    03L-906-019
    Not written in here: http://www.ross-tech.com/vag-com/labels.html
    I think TEMPLATE.LBL is also a little off from actually used label files. (login, long coding, SN)

    Thank you.

  7. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,510
    Post Thanks / Like
    Blog Entries
    1
    Yeah, the "Template" file is pretty old.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  8. #6
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,404
    Post Thanks / Like
    I realize the OP has his fuel bleeding concern resolved but VCDS Release 18.9.1 Data Version 20190215 / DS296.0 contains a redirect for that re-flashed EDC:

    https://ross-tech.de/downloads/upd

    If you run that updater make sure VCDS is closed (not running) while doing so.

  9. Likes Uwe, PetrolDave liked this post
  10. #7
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Latvia
    Posts
    106
    Post Thanks / Like
    Will successful redirect happen even if file extension is "wrong"?

  11. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,510
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by _Val View Post
    Will successful redirect happen even if file extension is "wrong"?
    I don't think so, but when developing a file, you can always use the full part number, which takes a higher precedence than the re-direct.

    So in this case (Part No SW: 03L 997 030 A), one could use: 03L-997-030-A.LBL and VCDS would find and open it before it went looking for a possible redirect.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  12. #9
    Verified VCDS User
    Join Date
    Feb 2019
    Location
    USA
    Posts
    3
    Post Thanks / Like
    I ran the update that Dana linked to, which was nice because there is a lot of Greek language in this thread. I hooked up and looked at the fuel pump again and it is now labeled "Fuel Supply Pump Activation". I don't know why I needed to update as I originally downloaded VCDS on Saturday. The fuel pump turned on and ran for about 15 seconds. I forgot to see if the drop down menu was active. Based on my picture (I hope I got it here right), it looks like it is active.


    Thank you everyone for your help on this. Next up is DSG temp in a couple of weeks!

  13. Likes PetrolDave, Uwe, Dana, billywhizz liked this post
  14. #10
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,404
    Post Thanks / Like
    Quote Originally Posted by merael View Post
    I don't know why I needed to update as I originally downloaded VCDS on Saturday.
    I can explain that Our newest dataversion (label files and redirects) wasn't entirely ready to go when the Release was updated. When that happens we offer Data Version updaters that can be sent as-needed (instead of forcing another VCDS update at all users that have their PCs set to automatically check for updates.)

  15. Likes Uwe, _Val, billywhizz liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •