Results 1 to 8 of 8

Thread: Full long coding helper

  1. #1
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Europe - Hungary
    Posts
    28
    Post Thanks / Like

    Full long coding helper

    Hello,

    I read out my and my friend car. The two car are similar but the 01: Engine ECU long coding a litle bit different.
    I would like two know what are the differences but the long code helper hide some bit.
    I am looking for for example what does the Byte5 Bit4 means.
    I copied the 2 long code underneath each other to see the differences.

    Address 01: Engine (J623-DADA) Labels:. 04E-907-309-V1.clb
    Part No SW: 05E 906 018 AL HW: 05E 907 309
    Component: R4 1.5l TFS H22 6084
    Revision: 81H22000
    Coding:
    0119003224341D0800000000000000000000000000000000
    011900322324190800000000000000000000000000000000

    Shop #: WSC 73430 031 00000
    ASAM Dataset: EV_ECM15TFS01105E906018AL 003002
    ROD: EV_ECM15TFS01105E906018AL.rod
    VCID: 6FBBD0C76712BBEF777-803B

    No fault code found.
    Readiness: 0000 0000

  2. #2
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Latvia
    Posts
    121
    Post Thanks / Like
    It's not hiding it, just not documented yet.

  3. #3
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,616
    Post Thanks / Like
    Quote Originally Posted by Amarton View Post
    I am looking for for example what does the Byte5 Bit4 means.
    Trailer installed
    But it is not used for all controllers, that is used for the label: 04E-907-309-V1.clb

  4. Likes Uwe liked this post
  5. #4
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Europe - Hungary
    Posts
    28
    Post Thanks / Like
    Quote Originally Posted by NEtech View Post
    Trailer installed
    But it is not used for all controllers, that is used for the label: 04E-907-309-V1.clb
    How can I use the long code helper without car?
    How can I load the label files to helper?

  6. #5
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    1,962
    Post Thanks / Like
    Quote Originally Posted by Amarton View Post
    How can I use the long code helper without car?
    You can't, because of clones illegal misusing the labels files they've had to be encrypted and are only unencrypted & used when connected to the appropriate ECU.
    Blame the clones for this change which Ross-Tech were forced to take to protect their IPR

    Quote Originally Posted by Amarton View Post
    How can I load the label files to helper?
    It loads them automatically.

  7. Likes Uwe liked this post
  8. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,983
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by PetrolDave View Post
    Blame the clones for this change which Ross-Tech were forced to take to protect their IPR
    It wasn't so much the clones as so many other wannabe vendor of diagnostic tools taking the data verbatim from VCDS. Some of them we cheap Chinese hand-helds, and others were well-known industry players.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  9. Likes PetrolDave liked this post
  10. #7
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Near Philadelphia, PA, USA
    Posts
    937
    Post Thanks / Like
    Blog Entries
    3
    Quote Originally Posted by Uwe View Post
    Some of them were cheap Chinese hand-helds, and others were well-known industry players.

    -Uwe-
    Whose customers then called Ross-Tech for support and service since their tool told them to do so...... yep, in the old days, some fault descriptions and such suggested a call to Ross-Tech for assistance. Imagine our surprise when a well known brand customer called asking for help. "What tool are you using? Send us a photo..." We were very very surprised....

  11. Likes Uwe, PetrolDave, Boki Ar, jyoung8607 liked this post
  12. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,983
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Bruce View Post
    Whose customers then called Ross-Tech for support and service since their tool told them to do so...... yep, in the old days, some fault descriptions and such suggested a call to Ross-Tech for assistance. Imagine our surprise when a well known brand customer called asking for help. "What tool are you using? Send us a photo..." We were very very surprised....
    Yep!



    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  13. Likes Bruce, PetrolDave, Boki Ar, jyoung8607, Santos liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •