i found a row IDE01711 - blocking of particle filter regeneration, if i set this to active will the car stop doing dpf regens? i am thinking dpf delete but was told i need new soft for the ecu but here i found this vcds option...
1.6 tdi with 190k km, still on original dpf, i understand its 60g/70g full?
1.6 tdi with 190k km, still on original dpf, i understand its 60g/70g full?
Code:
Address 01: Engine (03L 906 023 PF)
13:12:30
IDE00427-ENG101722 Particle filter: difference pressure-DIP_PF 3.15 hPa
IDE00428-ENG100917 Particle filter: offset for differential press.-DIP_PF_AD[0] -2.74 hPa
IDE00432-ENG103847 Particle filter: time since last regeneration-T_WOUT_RGN 6517.10 s
IDE00433-ENG103279 Particle filter: oil ash volume-MASS_ASH_PF 60.5141966 g
IDE00434-ENG102050 Particle filter: soot mass calculated-MASS_SOOT_SIM_PF 8.12 g
IDE00435-ENG101197 Particle filter: soot mass measured-MASS_SOOT_PHY_PF -2.04 g
IDE00436-ENG102397 Particle filter: kilometers since last regeneration-DIST_RGN 71.1 km
IDE01409-ENG102169 Charge limit for service regeneration-Ash Mass Diag 40.00 g
IDE01410-ENG102169 Charge limit over-charge-Ash Mass Diag 45.00 g
IDE06059-ENG103279 Particulate filter: oil ash mass-MASS_ASH_PF 60.5141966 g
IDE06060-ENG111632 Particulate filter ash load limit-C_MASS_ASH_PF_LIM_TEST 70.00 g
ENG110258-ENG99928 X_Soot_equivalent_of_ash_mass-MASS_SOOT_EQU_ASH_PF 0.56 g