Results 1 to 4 of 4

Thread: HEX-V2 and car software limitations?

  1. #1
    Unverified
    Join Date
    Jan 2019
    Location
    Slovenia
    Posts
    2
    Post Thanks / Like

    Question HEX-V2 and car software limitations?

    Hello,

    I'm considering buying a HEX-V2 for personal use. My official VW dealership says the following modifications aren't possible on Sharan / Alhambra 7N platform that use BCM PQ35 M:
    - Fog lights are turned on automatically when high beams are in use (and also automatically switched off when low beams are activated)
    - Adjusting auto-hold strength to lowest possible (quickest release)
    - Mirror lights / puddle lights are turned on automatically when reverse gear is selected
    - Fog lights are turned on automatically when reverse gear is selected

    According to info I could get all this should be easily doable on newer MQB platform but not on Sharan/Alhambra 7N. It would greatly help me to decide about investing in the HEX-V2 purchase if anyone could comment on the features above. Also, is there an option that those tweaks would be included in the future VCDS software updates?

    Kind regards.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    21,137
    Post Thanks / Like
    Blog Entries
    1
    The question is not what VCDS and a HEX-V2 supports; the question is what the car supports. If the car support changing something via the standard diagnostic API, then VCDS can do it (assuming of course that someone has figured out what needs to be done).

    Unfortunately, I'm not very familiar with the 7N platform, and much can depend on how the particular vehicle is equipped.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes PetrolDave liked this post
  4. #3
    Unverified
    Join Date
    Jan 2019
    Location
    Slovenia
    Posts
    2
    Post Thanks / Like
    Thank you @Uwe for a quick reply. Indeed, the limitation is in the car and therefore I was wondering if 7N platform supports these tweaks. The reason is that I've already spent a lot of time (re)searching but couldn't find anyone who successfuly accessed the 09 - Central Electronics PQ35 module via security code. Examples:
    https://forums.ross-tech.com/showthr...ty-access-code
    https://forums.ross-tech.com/showthr...ecurity-Access
    https://forums.ross-tech.com/showthr...47-not-working

    Since people mention that non-MQB platforms don't require security access / logic code for coding and adaptations, does this mean that the features from my original post won't be supported at all by the car? Given that other/older car platforms also use BCM PQ35 I was hoping to get more info or clues from this domain, because presumably someone has attempted similar things on non-MQB cars.

  5. #4
    Ross-Tech Employee Sebastian's Avatar
    Join Date
    Feb 2014
    Location
    Magdeburg, Germany
    Posts
    1,905
    Post Thanks / Like
    Quote Originally Posted by Z06 View Post
    - Fog lights are turned on automatically when high beams are in use (and also automatically switched off when low beams are activated)
    Based on the regulation, the car is required to conform with, fog lights may not be permitted to be used in combination with high beams. That is why the PQ35 BCM has a setting which will deactivate the fog lights once you switch to high beams. The vice versa situation, you are referring to is not manufacturer approved and may not be legal in your country/region. Yes, the MQB BCM can be programmed in a lot of ways, this included.

    Quote Originally Posted by Z06 View Post
    - Adjusting auto-hold strength to lowest possible (quickest release)
    MQB and 7N use completely different ESP/EPB systems and if I remember correctly, the MQB Auto-Hold uses the hydraulic brakes while the 7N Auto-Hold is applied via the actual EPB. So adjusting the strength is not really an option on the 7N.

    Quote Originally Posted by Z06 View Post
    - Mirror lights / puddle lights are turned on automatically when reverse gear is selected
    Definitely a no for the PQ35 BCM and door control modules.

    Quote Originally Posted by Z06 View Post
    - Fog lights are turned on automatically when reverse gear is selected
    Any chance you are confusing fog lights with turning lights? The latter can be activated in the PQ35 BCM once the reverse gear is engaged.
    Sebastian @ Ross-Tech.com // VCDS Rookie since 2003

    »Nichts erweitert das eigene Wissen mehr,
    als die Meinung eines Andersdenkenden.«

  6. Likes Uwe, jyoung8607 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •