Results 1 to 3 of 3

Thread: Audi rs3 2011 instrument panel won’t work and engine stops sec after starting

  1. #1
    Join Date
    Jan 2019
    Post Thanks / Like

    Audi rs3 2011 instrument panel won’t work and engine stops sec after starting

    Hi people, my name is Brian and I live in the Netherlands. I own a Audi rs3 2011 and since last Saturday morning my instrument panel does not work anymore and when I start the car it immediately the engine cuts again. Everything else works fine.
    I have checked the fuses and they are all good. Maybe my instrument panel burned out and because of that he does not make contact with my key (immobilizer)?
    I have the car read and hopefully someone can help me with this, thanks in advance:

    Removed.  Data from a clone/pirate copy of VCDS is not welcome here.
    Last edited by Uwe; 01-28-2019 at 09:53 AM.

  2. #2
    Verified VCDS User
    Join Date
    May 2017
    Post Thanks / Like
    Check fuses. Probably a burnt fuse. Hard to believe that the instrument cluster would just burn out like that.

    Look here :

    I would check position 38 first. That has instrument cluster and radio and both of them are non-reachable so good candidate for the cause of your troubles.

  3. Likes PetrolDave liked this post
  4. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Post Thanks / Like
    Blog Entries
    Getting further help in this forum will require the use of a legitimate VCDS system.

    They are available directly from us:

    ... Or from any of our authorized resellers:

    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts