Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: Golf Mk7 - CCS trouble after upgrade to high gateway

  1. #21
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    USA
    Posts
    31
    Post Thanks / Like
    No, waiting patiently for someone to turn up with an idea what to try next.

  2. #22
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    141
    Post Thanks / Like
    Was the gateway new or used? I had similar problem with some modules, but the problem was in modules itself. If I check your VIN, last index AC must be the right one for you. But with special software code Z0C.

  3. #23
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    USA
    Posts
    31
    Post Thanks / Like
    It was a new gateway purchased from a VW dealer for my VIN. The part number they identified and sold to me was 5Q0907530AC-Z00.

    Checked the site again just now and it says Z0C was replaced by Z00.

    Last edited by alpinehans; 02-09-2019 at 09:05 PM.

  4. #24
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    141
    Post Thanks / Like
    I see you say you have tried 2 HIGH gateway. Both have this problem about the "technical error has occured".
    The normal way to do this is:

    - Guided Functions
    - Replace Control Module

    Normally I work like this:

    - KS Master gateway remove component protection
    - Function Enable Status, input 19
    - Control module SVM ( this will parameterize the gateway and make adaptions and codings)

    If you send gateway to me I can make also activation, but let's check this first.

    Let me know.

    Regards

  5. #25
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    USA
    Posts
    31
    Post Thanks / Like
    I don't have access to ODIS myself, so I rely on others who do. I used an independent authorized VW dealer out of the UK who did the procedure remotely and he confirmed he did what you're describing above.

    We initially tried the used gateway, and when the fault occurred we didn't analyze it further but we switched to the new gateway. I am confident the fault we got with the new one is the same we had with the used gateway, which would indicate it is not gateway related.

    Do you have an idea what the problem is based on my post #19 above?

    If you're confident you can activate the CCS with the gateway out of the car, I can certainly mail it to you.

  6. #26
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    141
    Post Thanks / Like
    As I explain. I have this problem also with acc sensors. Never with gateway.

    I can activate that, but what options have the car more? Mode function?

  7. #27
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    USA
    Posts
    31
    Post Thanks / Like
    Quote Originally Posted by vastechnics View Post
    As I explain. I have this problem also with acc sensors. Never with gateway.

    I can activate that, but what options have the car more? Mode function?
    Sorry, I must have missed where you explained it.

    The car is very basic. No mode function. It has a multi function steering wheel, rain and light sensing wipers, 55 Headlight Range module, 69 Trailer module.

  8. #28
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    141
    Post Thanks / Like
    Ok i see. Send me pm. I give you adress and you can send me gateway

  9. Likes Dana liked this post
  10. #29
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    USA
    Posts
    31
    Post Thanks / Like
    Update: Cruise control FeC has been reactivated remotely and CCS is now working again as it should. All faults are gone. Headlight leveling is working. I am enjoying the nice, bright LED headlights.

    Taking a break before figuring out my next project ...

  11. Likes kamold, Dana liked this post
  12. #30
    Verified VCDS User
    Join Date
    Jan 2019
    Location
    France
    Posts
    9
    Post Thanks / Like
    Hello, can you tell me how you have resolved this ?
    I have exactly the same issue and I can't solve it

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •