Hello all,

I'm not sure if this is a good place to post this but here goes.

I have a 2017 GTI S that I have added the Golf R Headlights to, and once I got all the Leuchte channels updated for the BCM (5Q0-937-087-AN) I got possibly the most annoying code on the planet

Code:
1 Fault Found:
526615 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          [Steuergerät falsch codiert->Keine Anzeige]
          Confirmed - Tested Since Memory Clear
After hours of arguing with my Car/Laptop/HexNet/Everything I found out it was related to this Adaptation channel in particular:

Code:
IDE05145-Light configuration,0C 34 00 14 02 00 64 00 00 00 00 00 00 00 00 00 0C 3E 00 15 04 00 64 00 00 00 00 00 00 00 00 00 04 48 00 4A 14 00 64 06 00 80 08 09 1A 00 00 00 04 4C 00 4C 14 00 64 07 00 80 08 0A 1A 00 00 00 01 3A 00 49 14 00 7F 06 00 80 08 09 7F 00 00 00 01 44 00 4B 14 00 7F 07 00 80 08 0A 7F 00 00 00 03 36 00 1A 0B 0F 7F 00 00 00 00 00 00 00 00 00 03 40 00 1B 0C 0F 7F 00 00 00 00 00 00 00 00 00 24 35 00 26 08 09 7F 00 00 00 00 00 00 00 00 00 24 3F 00 27 08 0A 7F 00 00 00 00 00 00 00 00 00 02 37 00 1E 0D 0F 7F 00 00 00 00 00 00 00 00 00 02 41 00 1F 0E 0F 7F 00 00 00 00 00 00 00 00 00 06 38 00 22 12 00 7F 00 00 00 00 00 00 00 00 00 06 42 00 23 13 00 7F 00 00 00 00 00 00 00 00 00 ,224
Not surprisingly, this channel seems to contain part of the configuration for halogen vs. HID. (I think) Since my BCM has no Long Coding

I found an AdMap of a 2017 GTI Autobahn that used the EXACT same BCM. So, (possibly foolishly) I copied the configuration over to my BCM and *POOF* no more errors.

Now a word of warning. I was lucky in that I found an AdMap that matched EXACTLY with my BCM and Car but I still wanted to post this information just in case someone smarter than me knows I did it wrong. In which case, please let me know.