Results 1 to 4 of 4

Thread: VIM with RossTech

  1. #1
    Verified VCDS User
    Join Date
    Jul 2018
    Location
    France
    Posts
    30
    Post Thanks / Like

    VIM with RossTech

    Hi

    Looks like some mod can only be done with "VCP" (such à Video in Motion for some A6 models). See https://www.youtube.com/watch?v=iDjRENhhq1w

    Any plan to add that capability to RossTech ?

    Thx

  2. #2
    Verified VCDS User TBAx's Avatar
    Join Date
    Dec 2016
    Location
    DE
    Posts
    355
    Post Thanks / Like
    This modification requires read/write access to the control modules‘ EEPROM. VCDS has currently no feature to do so and in my understanding of what Uwe told, it is not planned to be implemented; at least in the near future.

    The same goes for uploading datasets, which is currently very much required for retrofits in current gen cars.

    However I would be happy hearing that stuff would be implemented. Everyone who mistakenly changed BCM Byte 18 in PQ35 would be able to correct the mistake by themselves etc.

  3. Likes D-Dub, Uwe liked this post
  4. #3
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    541
    Post Thanks / Like
    VIM for Audi A6 pre-Facelift can be done with VCDS as there it is just an adaptation channel in unit 5F.
    Just as a side note as the author mentioned an A6

  5. #4
    Verified VCDS User
    Join Date
    Jul 2018
    Location
    France
    Posts
    30
    Post Thanks / Like
    Unfortunatly some A6 models require access to the control modules‘ EEPROM :-(((

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •