Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Fault Codes and cruise control not working.

  1. #11
    Verified VCDS User
    Join Date
    Jul 2014
    Location
    UK
    Posts
    17
    Post Thanks / Like
    Quote Originally Posted by Dana View Post
    Hmm, that Google image loads in FF and Chrome but IE isn't showing it on a Win 7 PC. This is the direct URL https://photos.app.goo.gl/8iEFJcRs6So1bqkd9

    Address 16: Steering wheel (J524) is the new module so that's what I'd try coding to 0D00 if the factory coding isn't known.
    Thank you for your reply and picture.
    As the vehicle has adaptive cruise control would this be the correct coding?
    (The control for cruise is on the steering wheel)

    If so I assume your picture would suggest that the "E221 MFSW slave" handles the request for cruise control as opposed to the "16-Steering Wheel module "

  2. Likes Dana liked this post
  3. #12
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    4,098
    Post Thanks / Like
    Yeah, my coding should be correct based on Automatic trans scans with ACC from good baseline cars.

    I re-worded that to read "Cruise Control NOT installed -or- Cruise Control handled by E221 MFSW slave of J533". If there aren't any objections that will make it to the next dataversion. (It didn't make it to Release 18.9.1 this afternoon).

  4. Likes Uwe liked this post
  5. #13
    Verified VCDS User
    Join Date
    Jul 2014
    Location
    UK
    Posts
    17
    Post Thanks / Like
    Okay just to update.

    Coding 0D10 was a Error 31 coding rejected out of range.

    I managed to code to OE10 but have the following error code.

    The wiper washer stick front and rear does operate and now so does the cruise control now.

    Also I no longer have loads of data bus errors so prehaps the other code may have been preexisting



    Code:
    Thursday,17,January,2019,09:28:40:06086
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.0.2 (x64)
    Data version: 20180927 DS296.0
    www.Ross-Tech.com
    
    
    VIN: WVWZZZAUZEP534346   License Plate: R666GFE
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
                    Address 16: Steering wheel       Labels: 5Q0-953-549.clb
    Control Module Part Number: 5Q0 953 569 A    HW: 5Q0 953 569 A
      Component and/or Version: Lenks.Modul   075 0235
               Software Coding: 0E10
                Work Shop Code: WSC 01286 386 08256
                  ASAM Dataset: EV_SMLSVALEOMQB 001016 (VW37)
                           ROD: EV_SMLSVALEOMQB.rod
                          VCID: 3C77EA25B77C61AAC9-8068
    1 Fault Found:
    
    227355 - Windshield Wiper/Washer Switch 
              B1149 13 [009] - Open Circuit
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 3
                        Fault Frequency: 1
                        Reset counter: 24
                        Mileage: 96248 km
                        Date: 2019.01.17
                        Time: 09:18:26
    
                        Ubat 30 Voltage: 11.50 V
                        Ignition State: On
                        Terminal 15: 10.70 V
                        A/D #1: 97.25 %
                        A/D #2: 20.78 %
                        A/D #3: 0.00 %




  6. Likes Dana liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •