Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Who wants to dwell over or DUAL on x2 N80 function & helpful mods/SMOG reduced?

  1. #21
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    Brake Booster line mock up, brackets, anti chafe provisions, clamps and landed!

    Clamp at pro vent TBD in process!
    Clamp at fire wall and fan control unit landed, moving flexibility point by braided rubber line reinforced with internal spring wound!
    Verify possible clearance chafe point at strut tie bar check!



    Chafe selves added to braided hose!
    Flat extension bracket determined in front of pro vent to add stability with chafe sleeves in process.


    Booster circuit and forward bracket complete with notch for clamp all stuff painted it's a wrap for brake booster!

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  2. Likes jyoung8607, Uwe, NZDubNurd, PetrolDave, D-Dub liked this post
  3. #22
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    SAT update........SUMP MOD!

    Pro vent drain to SUMP add addition with pipe to integrated baffle labyrinth in oil pan "grid" trap door design not shown.

    Run and route hose from Provent in process still for additional two brackets TBD @ Trans case.

    Start FAB on the fly........

    REMOVE lower stress bar and dog bone drain oil and remove turbo return line.

    REMOVE PAN FOR QT INSPECTION OF GIRDLE AND OIL QUALITY & TOO VACATE ASSEMBLY PASTES. CHECK!



    DRILL HOLE IN PAN AND BEND PIPE LEFT OVER FROM CHINA TOILET PAPER HOLDER & TO MAKE USE OF SCRAP WHICH IS NOW A RACE CAM BRAKE ROTOR TOILET PAPER HOLDER.
    WELD IN PLACE FREE HAND BRACKET TO HOLD FOR VIBRATION.

    MIGHTY VAC THE LINE AFTER WELD AND PAINT ....CHECK!
    INSTALL PAN TEST FIT WITH GRID .....CHECK



    VERIFY RETURN LINE AND CUT TO ESTIMATE ROUTING FROM MANN PRO VENT........CHECK.
    LAND FASTENERS......

    HOSE TYPE DOUBLE BRAIDED ATF AND DIESEL TYPE TO NOT REACT!




    THAT'S IT FOR TODAY......BEAT!
    SAMS CLUB RUN AND TIME FOR COCKTAILS AND DEBRIEFING!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  4. Likes jyoung8607, Uwe, D-Dub liked this post
  5. #23
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    OKAY TODAY'S REPORT ON LOWER TURBO BRACKET SUPPORT I ALWAYS SEEM TO SEE NEGATED!


    SOME ROUND STOCK AND PLATE + CONSIDERING MOUNT OPTIONS STRAIGHT VS TRIANGULATED


    TRIANGULATED IT IS...... TACK UP IN PLACE!



    CHECKING FITMENT AND TEST COVER CLEARANCE FOR CUSTOM CV HEAT SHIELD





    TAKE BACK APART AND MEASURE NEW HARDWARE AND PAINT WITH HIGH HEAT WURTH PAINT!




    IT'S A WRAP FOR TODAY!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  6. Likes Uwe, jyoung8607, NZDubNurd, PetrolDave liked this post
  7. #24
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    Mock/Weld up, painted landed Mann pro vent brackets to sump at Transmission/starter location for chafe at starter solenoid/lower radiator hose during motor TQ solved + for resonance solution.



    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  8. Likes NZDubNurd, Uwe liked this post
  9. #25
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,358
    Post Thanks / Like
    Blog Entries
    1
    Am I hallucinating or is that a K&N type filter peeking through in those pics?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  10. #26
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    You are not hallucinating & I know you know it would never be my choice right?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  11. Likes Uwe liked this post
  12. #27
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    Progress custom CV joints installed with tie bar............








    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  13. Likes D-Dub, jyoung8607, Santos, Uwe, NZDubNurd liked this post
  14. #28
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    Passive Static coolant tests are indeed in commencement..........mighty vac used at return to expansion tank line to bleed & why not clamped.

    Then heat gun is used to warm radiator and engine to observe for level change and weep trace.

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  15. Likes jyoung8607, Uwe, D-Dub liked this post
  16. #29
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    17,371
    Post Thanks / Like
    Well that is it...... I officially HATE Ethanol in Gasoline and Diesel FUEL!

    Brand new fuel pump was attacked by it and destroyed from shear corrosion and even with controlled environment, preventive inhibitors and fuel stabilizer.

    Another New pump installed and fuel tank and lines flushed to service ports.

    Found leak at filler line & so installed a new clamp.

    Static coolant test for leaks has not moved a bit! YAY!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  17. #30
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,358
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Jack@European_Parts View Post
    Well that is it...... I officially HATE Ethanol in Gasoline and Diesel FUEL!
    Ethanol in diesel fuel? I'd hate that too; it would cause far more problems there than in gasoline!

    You should move the heck out of NYS. Rural Virginia or Florida, where non-ethanol gasoline is still readily available.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  18. Likes PetrolDave liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •