Lost my engine noise simulation on my Audi Allroad 3,0Bitdi 313hk 2013

   #1  

jaendor9

New Member
Joined
Dec 11, 2018
Messages
3
Reaction score
0
Location
Norway
VCDS Serial number
HC428297 (2nd hand?)
Address C0: Act. for Ext. Noise (J943) Labels: 4G0-907-160.clb
Part No SW: 4G0 907 160 B HW: 4G0 907 160 B
Component: SAS-GEN 2 AGA H09 0004
Serial number: 120713200186
ASAM Dataset: EV_ActuaForExterNoiseUDS 003013
ROD: EV_ActuaForExterNoiseUDS.rod
VCID: 244DE69A2F2AA26A91-8070

2 Faults Found:
0006 - Actuator 1 for Engine Noise Simulation
C113C 13 [008] - Open Circuit
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 254
Reset counter: 93
Mileage: 88661 km
Date: 2018.10.03
Time: 07:33:57

0010 - Databus
U1121 00 [008] - Missing Message
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 70694 km
Date: 2017.11.15
Time: 14:24:55


i can't find out whats wrong. any ide where 2 start looking?
have only check 2 fuses. and look on the internet for many hours without any result. tryed looking on Erwin, but nothing there that helps me.

i lost the exhaust sound Date: 2018.10.03. so i think it's the first fault thats my problem.
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,621
Location
USA
VCDS Serial number
HC100001
Well, "Open Circuit" should be pretty clear, no?

-Uwe-
 
   #3  

jaendor9

New Member
Joined
Dec 11, 2018
Messages
3
Reaction score
0
Location
Norway
VCDS Serial number
HC428297 (2nd hand?)
i think it's cord breakage or loose contact. But could it be a broken actuator? sorry for my stupid question. i just thought maby someone had the same problem one time and could tell me about it. since i couldn't find how that system is build up.
 
Last edited:
   #4  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,621
Location
USA
VCDS Serial number
HC100001
i think it's cord breakage or loose contact. But could it be a broken actuator?
Yes, it could be any of those things. The module just knows the circuit is open. Further trouble-shooting would be done with the aid of wiring diagrams and a mulitmeter.

-Uwe-
 
   #5  

jaendor9

New Member
Joined
Dec 11, 2018
Messages
3
Reaction score
0
Location
Norway
VCDS Serial number
HC428297 (2nd hand?)
has now crossed actuator 1 and 2. error message is the same. did not change. The cables are in line with the control unit. no breakage. This helps to suspect errors in the control unit itself. but did anyone experience open circuit errors due to errors in the board itself?
 
   #6  

Raphae1

New Member
Joined
Dec 31, 2019
Messages
1
Reaction score
0
Location
UK
jaendor9 did you ever resolve this issue? I have a similar issue and would like to know.
 
   #7  

Christoffer

Verified VCDS User
Verified
Joined
Feb 1, 2020
Messages
1
Reaction score
0
Location
Denmark
VCDS Serial number
C?ID=375977
Hi jaendor9 and Raphae1. Did you ever resolve this issue, as I have a similar issue and would like to know? Furthermore were you able to delete error codes on the module? When I try to delete the 0006 error code, I get a message saying, that the attempt to delete the error code wasn't accepted by the control unit.
 
   #8  

Mari

Verified VCDS User
Verified
Joined
Jun 26, 2014
Messages
391
Reaction score
345
Location
Netherlands
VCDS Serial number
C?ID=150535
We have seen jaendor9 for the last time on this forum on 12-17-2018 so I don't think he will answer... Raphael1 is probably also waiting for jaendor9 to answer... so hopefully one of the other forum members know what to do except checking wiring...
 
Back
Top