Address C0: Act. for Ext. Noise (J943) Labels: 4G0-907-160.clb
Part No SW: 4G0 907 160 B HW: 4G0 907 160 B
Component: SAS-GEN 2 AGA H09 0004
Serial number: 120713200186
ASAM Dataset: EV_ActuaForExterNoiseUDS 003013
ROD: EV_ActuaForExterNoiseUDS.rod
VCID: 244DE69A2F2AA26A91-8070

2 Faults Found:
0006 - Actuator 1 for Engine Noise Simulation
C113C 13 [008] - Open Circuit
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 254
Reset counter: 93
Mileage: 88661 km
Date: 2018.10.03
Time: 07:33:57

0010 - Databus
U1121 00 [008] - Missing Message
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 70694 km
Date: 2017.11.15
Time: 14:24:55


i can't find out whats wrong. any ide where 2 start looking?
have only check 2 fuses. and look on the internet for many hours without any result. tryed looking on Erwin, but nothing there that helps me.

i lost the exhaust sound Date: 2018.10.03. so i think it's the first fault thats my problem.