Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Transporter 2018 + HEX V2

  1. #21
    FoRT jyoung8607's Avatar
    Join Date
    Feb 2014
    Location
    Cincinnati, OH
    Posts
    2,439
    Post Thanks / Like
    Quote Originally Posted by Martbspike View Post
    I read somewhere, not sure how true it was, that vw had introduced a security measure to stop wireless hacking, by needing the bonnet, (hood) to be open to accept coding.
    The "diagnostic firewall" with the hood shut is definitely something that exists on very new models. I'm not sure if it applies to your Transporter, though, and VCDS is also supposed to detect and inform you if the diagnostic firewall function is active.
    Silence gives consent.

  2. Likes Andy, Uwe, PetrolDave, Dana liked this post
  3. #22
    Verified VCDS User
    Join Date
    Jan 2019
    Location
    Germany
    Posts
    84
    Post Thanks / Like
    Quote Originally Posted by Sebastian View Post
    As mentioned before, there is a glitch in the control module (BCM) firmware, which will allow saving changes in both coding and adaptation but they won't have an effect. This effects most T6 models, though most customers will never notice. Some settings are taking, others are not. Then, months later you tweak a totally unrelated setting and voila everything you tweaked before also comes alive. I've spent the last 2 years on my own T6 again and again to figure this out. At the present time, I got both the audible confirmation as well as the auto-lock/unlock working, as these are the two settings mostly relevant here.
    @Sebastian: Just stumbled over your Post.

    Any more news regarding the Issues with the T6 BCM ?
    I can confirm this behaviour with my T6 BCM.
    Code:
       Part No SW: 7E0 937 090 C    HW: 7E0 937 090 C
       Component: BCM PQ25 Max4 H82 0752
    Probably with newer Firmware or Hardware this is fixxed ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •