Have trouble code messages which i dont understand

hi,

what means this codes????

10240 - Sensor for Automatic Distance Control
C110B F0 [008] - Limited Visibility
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 7
Fault Frequency: 6
Reset counter: 79
Mileage: 250165 km
Date: 2018.11.14
Time: 14:38:03

Control Module temperature: 35 °C
Voltage terminal 15: 14.198 V
Velocity_vehicle_reference: 8.65 m/s
Longitudinal_acceleration_vehicle_reference: 0.06 m/s²

105472 - Function Restriction due to Faults in Other Modules
U1113 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 9
Reset counter: 79
Mileage: 251711 km
Date: 2018.12.05
Time: 14:49:29

Control Module temperature: 37 °C
Voltage terminal 15: 14.199 V
Velocity_vehicle_reference: 16.47 m/s
Longitudinal_acceleration_vehicle_reference: 0.20 m/s²

141568 - Function Restriction due to Faults in Other Modules
U1113 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 9
Reset counter: 79
Mileage: 251711 km
Date: 2018.12.05
Time: 14:49:29

Control Module temperature: 37 °C
Voltage terminal 15: 14.199 V
Velocity_vehicle_reference: 16.47 m/s
Longitudinal_acceleration_vehicle_reference: 0.20 m/s²

93440 - Function Restriction due to Faults in Other Modules
U1113 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 79
Mileage: 249488 km
Date: 2018.11.02
Time: 13:35:38

Control Module temperature: 44 °C
Voltage terminal 15: 13.913 V
Velocity_vehicle_reference: 13.29 m/s
Longitudinal_acceleration_vehicle_reference: 0.04 m/s²

can't VCDS read out the system????

Please help

Extended UDS fault data, the presence of which is indicated by:

"[New feature! Extended UDS fault detail is only supported by current gen. interfaces]"

... is a featrue that does not exist in the dealers' ODIS tool, and it is something that VCDS only supports when used with one of our current interfaces.

-Uwe-

i have the HEX V2

also should i ignore this messages?

thor1974 said:

i have the HEX V2
also should i ignore this messages?

Click to expand...

VCDS should not produce that message when used with a HEX-V2.

All I can find in your records is a HEX+CAN from 2012.

Please post an Auto-Scan from this car made with a HEX-V2.

-Uwe-