Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: G28 Speed Snsor Issue

  1. #11
    Verified VCDS User ak77's Avatar
    Join Date
    Jan 2015
    Location
    Australia
    Posts
    77
    Post Thanks / Like
    Hi Jack,
    I have isolated your idea and found not to be the case. I have replaced dash console, immobilizer and key mechanism from another GT.
    It does identical start. First time nothing happens. then after 5 sec it cranks.

    At least I tried.

    Al

  2. #12
    Verified VCDS User ak77's Avatar
    Join Date
    Jan 2015
    Location
    Australia
    Posts
    77
    Post Thanks / Like
    Hey Dana, I have tested both fuel pumps tank and tandem and the work perfectly. In fact that was the first thing I isolated as it did feel like engine wasn't getting fuel (priming) / or the drained battery (wouldn't turn). What I did, I installed transparent hose to engine from fuel tank filter chamber to see if there is air bubbles in mixture while flowing.... I will look into timing as soon as my new belt tension kit arrives. Keep you posted.

    Al

  3. Likes Dana liked this post
  4. #13
    Verified VCDS User ak77's Avatar
    Join Date
    Jan 2015
    Location
    Australia
    Posts
    77
    Post Thanks / Like
    One thing its worth a mention , I don't always get the Error Workshop message once cranking. Mostly it just glow plug spiral icon flashing.
    On all occasions after scanning , I only get G28 error code. Any thoughts?

    Al

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •