Hey y’all, i just revived my A4 after finally getting the right CLP as stated in previous posts/topic header. I just installed a new battery as well and did the “pedal to the floor” trick to get it to crank after putting the key in drive first...i’ve been through this before.
my question is to where i can find (hopefully in my VCDS-Lite software) a setting to re-connect my door locks. it appears that the CLP works just fine now (it used to set the alarm off and do other crazy things due to water damage) but isn’t doing anything in regards to the door locks.
Thanks in advance!
my question is to where i can find (hopefully in my VCDS-Lite software) a setting to re-connect my door locks. it appears that the CLP works just fine now (it used to set the alarm off and do other crazy things due to water damage) but isn’t doing anything in regards to the door locks.
Thanks in advance!