Results 1 to 2 of 2

Thread: 1999 A4 Central Locking Pump re-install question

  1. #1
    Verified VCDS User siderealdaze's Avatar
    Join Date
    May 2018
    Location
    USA
    Posts
    4
    Post Thanks / Like

    1999 A4 Central Locking Pump re-install question

    Hey y’all, i just revived my A4 after finally getting the right CLP as stated in previous posts/topic header. I just installed a new battery as well and did the “pedal to the floor” trick to get it to crank after putting the key in drive first...i’ve been through this before.

    my question is to where i can find (hopefully in my VCDS-Lite software) a setting to re-connect my door locks. it appears that the CLP works just fine now (it used to set the alarm off and do other crazy things due to water damage) but isn’t doing anything in regards to the door locks.

    Thanks in advance!

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,845
    Post Thanks / Like
    Blog Entries
    1
    What do you mean by "re-connect my door locks"?

    -Uwe-
    Lock-down of sick people: Quarantine
    Lock-down of healthy people: Tyranny

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •