Results 1 to 2 of 2

Thread: Infotainment Databus in Single Wire Operation

  1. #1
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    USA
    Posts
    1
    Post Thanks / Like

    Infotainment Databus in Single Wire Operation

    I'm working on a 2013 EOS that had a major water leak. The telephone module was fried and the power wire corroded off so i replace the module and fixed the wire. Now the Can Gateway sets a code-


    00469 - Infotainment Databus in Single Wire Operation
    011 - Open Circuit
    Freeze Frame:
    Fault Status: 01101011
    Fault Priority: 3
    Fault Frequency: 1
    Reset counter: 122
    Mileage: 79655 km
    Time Indication: 0
    Date: 2018.11.27

    Can anyone help me out with this? Radio/Bluetooth media function doesn't seem to be restricted.

  2. #2
    Verified VCDS User
    Join Date
    Apr 2016
    Location
    United Kingdom
    Posts
    154
    Post Thanks / Like
    You'll have to do a continuity test on the CAN High and Low wires. I'm not familiar with the physical wiring in the EOS so can't help where to look. You'll have to find a WD from Elsa. But the principle is to test from the Gateway plug to the Infotainment plug.

    CAN will work with just one wire. Did you touch any CAN wires during the fix?
    Last edited by mattylondon; 11-27-2018 at 12:00 PM.

  3. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •