Results 1 to 10 of 10

Thread: How to do Basic Settings for 7-speed S-Tronic DQ381 (0GC) A3 2017 1.8TFSI Quattro?

  1. #1
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like

    How to do Basic Settings for 7-speed S-Tronic DQ381 (0GC) A3 2017 1.8TFSI Quattro?

    Hi.

    I'm not 100% sure the correct steps to do a basic settings for a 7-speed DQ381 (0GC) transmission. In the wiki there are a few different ways of doing this, but I cant find any for my DQ381. I'm having trouble with judder/clutch hogging and late response issues in 1, 2 and 3 shift. It is very random and hard to replicate for the dealer/service. The car has been like this since
    new (18 months).

    Could someone help me? And do you recommend doing some more resets etc?

    I've attached a full scan below.

    Code:
    Friday,23,November,2018,18:22:45:00116
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 18.9.0.2 (x64)  HEX-V2 CB: 0.4436.4
    Data version: 20180927 DS296.0
    www.Ross-Tech.com
    
    
    VIN: WAUZZZ8V0H10XXXXX   License Plate: 
    Mileage: 11753km-7302mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8V-AU37 (3Q0)
    Scan: 01 02 03 05 08 09 10 13 14 15 16 17 19 20 22 2B 42 44 52 55
              5F 6C BB BC
    
    VIN: WAUZZZ8V0H10XXXXX   Mileage: 11753km-7302miles
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    05-Acc/Start Auth. -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    10-Park/Steer Assist -- Status: OK 0000
    13-Auto Dist. Reg -- Status: OK 0000
    14-Susp. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    20-High Beam Assist. -- Status: OK 0000
    22-AWD -- Status: OK 0000
    2B-Steer. Col. Lock -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    55-Headlight Range -- Status: OK 0000
    5F-Information Electr. -- Status: OK 0000
    6C-Back-up Cam. -- Status: OK 0000
    BB-Door Rear Drv -- Status: OK 0000
    BC-Door Rear Pass -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine (J623-CZPB)       Labels:. 06L-907-115-V1.clb
       Part No SW: 8V0 907 115 C    HW: 06L 907 309 B
       Component: 2.0 R4 TFSI   H31 0002  
       Revision: 1DH31000    
       Coding: 022500122466010B34000000000000000000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_ECM20TFS0118V0907115C 001004
       ROD: EV_ECM20TFS0118V0907115C.rod
       VCID: 38292AEAD2D38C87665-806C
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans (J743)       Labels:. 0BH-927-711.clb
       Part No SW: 0GC 300 011 R    HW: 0GC 927 711 G
       Component: GSG DQ381     H06 0703  
       Revision: 00H06V07    
       Coding: 0014
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_TCMDQ381061 001
       ROD: EV_TCMDQ381061.rod
       VCID: 313F17CE31A95DCF21B-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
       Part No SW: 5Q0 614 517 CF    HW: 5Q0 614 517 AD
       Component: ESC           H25 0513  
       Revision: 00000000    Serial number: 60087000000663
       Coding: 13F16AA23426126C8B780F0940CC28C8562C48D1F0021475184150F48208420000000012121212B835351919323200
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_Brake1UDSContiMK100IPB 036010
       ROD: EV_Brake1UDSContiMK100IPB_036_VW41.rod
       VCID: 77ABE9D69F4D43FFAFF-8022
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
       Part No SW: 5Q0 959 435 B    HW: 5Q0 959 435 
       Component: VWKESSYMQB    021 0710  
       Revision: 00021000    Serial number: 0430250577
       Coding: 030C1C
       Shop #: WSC 12345 123 61029
       ASAM Dataset: EV_KessyHellaMQBAB 002019
       ROD: EV_KessyHellaMQBAB_002.rod
       VCID: 3B2335E6E3E5A79F8B7-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (E87)       Labels:| 8V0-820-043.clb
       Part No SW: 8V0 820 043 Q    HW: 8V0 820 043 Q
       Component: AC Automat    H03 0130  
       Revision: 20002000    Serial number: 00000001152803
       Coding: 03000004000000011000000000001100
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_AirCondiFrontVaAU37X 008022
       ROD: EV_AirCondiFrontVaAU37X.rod
       VCID: 40D9420A8A03C447DE5-8014
    
       Relative humidity sensor in fresh air intake duct: 
       Subsystem 1 - Part No SW: 4H0 907 658 B    HW: 4H0 907 658 B
       Component: AQ_Hum_Sensor  H01 0006 
       Serial number: E7098F8800PAG0MUFU03
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 5Q0-937-08X-V2.clb
       Part No SW: 5Q0 937 084 CF    HW: 5Q0 937 084 CF
       Component: BCM MQBAB M+  H34 0236  
       Serial number: 02001702503798
       Coding: 000000000000000000000000000000000000000000000000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_BCMMQB 017001
       ROD: EV_BCMBOSCH_017.rod
       VCID: 7EA5FCF2B07772B7EC9-802A
    
       Control Unit For Wiper Motor: 
       Subsystem 1 - Part No SW: 8V1 955 119 C    HW: 8V1 955 119 A  Labels: 5QX-955-119-V1.CLB
       Component: WWS371 161213  043 0585 
       Serial number:         161222080923
       Coding: 0A47F7
    
       Rain Light Recognition Sensor: 
       Subsystem 2 - Part No SW: 8U0 955 559 C    HW: 8U0 955 559 B  Labels: 8U0-955-559.CLB
       Component: G397_RLFS  H06 0004 
       Serial number: 62605578            
       Coding: 00006C
    
       Light switch: 
       Subsystem 3 - Part No SW: 8V0 941 531 AR    HW: 8V0 941 531 AR
       Component: E1 - LDS MQB  H06 0032 
       Serial number: 13 11 2016  00000283
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-294.clb
       Part No SW: 5QA 919 294 A    HW: 5QA 919 294 
       Component: PDC 8 KanalH07 0038  
       Serial number: 000308418617025
       Coding: 0470151011
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_EPHVA18AU3700000 009031
       ROD: EV_EPHVA18AU3700000_009_VW37.rod
       VCID: 4ACD6022BC3F0E17001-801E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 13: Auto Dist. Reg (J428)       Labels:| 3Q0-907-572.clb
       Part No SW: 5Q0 907 572 G    HW: 5Q0 907 572 G
       Component: ACC BOSCH MQB H10 0571  
       Coding: 3500E78259FF8728949C8055000026
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_ACCBOSCHVW416 001005
       ROD: EV_ACCBOSCHVW416_001_VW37.rod
       VCID: 3B2335E6E3E5A79F8B7-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 14: Susp. Elect. (J250)       Labels: 8V0-907-376.clb
       Part No SW: 8V0 907 376 G    HW: 8V0 907 376 F
       Component: DAEMPFUNGS-SG H11 0082  
       Serial number:       291116068
       ASAM Dataset: EV_AudiMagneRide 002008
       ROD: EV_AudiMagneRide.rod
       VCID: 45D7531E9521E16FED3-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
       Part No SW: 5Q0 959 655 AR    HW: 5Q0 959 655 AR
       Component: AirbagVW21    003 0317  
       Serial number: 003TDR2M4T88
       Coding: 98CCC0000C0000005C5400CA004800000065
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_AirbaVW20SMEVW37X 002154
       ROD: EV_AirbaVW20SMEVW37X.rod
       VCID: 1079B24A9AE374C70E5-8044
    
       Belt Pretensioner left: 
       Subsystem 1 - Part No SW: 5G0 980 945 B    HW: 5G0 980 945 B
       Component: BeltPretRevFL  H37 0350 
       Serial number: 34120583D26011790530
       Coding: 333135
    
       Belt Pretensioner right: 
       Subsystem 2 - Part No SW: 5G0 980 946 B    HW: 5G0 980 946 B
       Component: BeltPretRevFR  H37 0350 
       Serial number: 34120584D26011780705
       Coding: 333135
    
       Side Sensor Driver Front: 
       Subsystem 3 - Part No SW: -----------    HW: 480 000 802 17
       Component: SideSensor_Df  001 0887 
       Serial number: 357000000000088D912D
       Coding: 2D2D2D
    
       Side Sensor Passenger Front: 
       Subsystem 4 - Part No SW: -----------    HW: 480 000 802 17
       Component: SideSensor_Pf  001 0887 
       Serial number: 35800000000890640123
       Coding: 2D2D2D
    
       Side Sensor Driver Rear: 
       Subsystem 5 - Part No SW: -----------    HW: 480 402 301 17
       Component: SideSensor_Dr  000 6149 
       Serial number: 3510001BD248E89306BD
       Coding: 2D2D2D
    
       Side Sensor Passenger Rear: 
       Subsystem 6 - Part No SW: -----------    HW: 480 402 301 17
       Component: SideSensor_Pr  000 6149 
       Serial number: 3520001B1237EE23718+
       Coding: 2D2D2D
    
       Front Sensor Driver: 
       Subsystem 7 - Part No SW: -----------    HW: 480 401 512 16
       Component: FrontSensor_D  001 6149 
       Serial number: 3550002B123C4E30321S
       Coding: 2D2D2D
    
       Pedestrian Protection Driver: 
       Subsystem 8 - Part No SW: -----------    HW: 480 402 101 17
       Component: PedP_Sensor_D  000 6149 
       Serial number: 2280001A1246A8E51682
       Coding: 2D2D2D
    
       Pedestrian Protection Passenger: 
       Subsystem 9 - Part No SW: -----------    HW: 480 402 101 17
       Component: PedP_Sensor_P  000 6149 
       Serial number: 2290001A1246A8E36181
       Coding: 2D2D2D
    
       Pedestrian Protection Driver 2: 
       Subsystem 10 - Part No SW: -----------    HW: 480 001 901 17
       Component: PedPSensor_D2  001 0887 
       Serial number: I0M0000000082945CF1A
       Coding: 2D2D2D
    
       Pedestrian Protection Passenger 2: 
       Subsystem 11 - Part No SW: -----------    HW: 480 001 901 17
       Component: PedPSensor_P2  001 0887 
       Serial number: I0N0000000003945CF14
       Coding: 2D2D2D
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
       Part No SW: 8V0 953 521 KM    HW: 5Q0 953 549 E
       Component: Lenks. Modul  003 0140  
       Revision: --------    Serial number: 03021704400745
       Coding: E018
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_SMLSKLOMQB 020002
       ROD: EV_SMLSKLOMQB_020_AU37.rod
       VCID: 0F7BB13687DD6B3F17F-805A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI2
       Part No SW: 8V0 920 790     HW: 8V0 920 790 
       Component: FBenRDW       H14 0046  
       Coding: 048418503F8000080185E8001000000000000000
       Shop #: WSC 12345 123 61029
       ASAM Dataset: EV_DashBoardFPKAU37X 001023
       ROD: EV_DashBoardFPKAU37X.rod
       VCID: 79AFEFEEA959558FD9B-802C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:| 3Q0-907-530-V1.clb
       Part No SW: 3Q0 907 530 C    HW: 3Q0 907 530 C
       Component: GW MQB High   515 5286  
       Serial number: 06021710802260
       Coding: 030100043F085A005B00025C9C0B00000001010000000000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_GatewNF 013020
       ROD: EV_GatewNF_VW37.rod
       VCID: 2F3B11B6279D4B3F37F-807A
    
       Alternator: 
    
       Multi Function Steering Wheel Control Module: 
       Subsystem 2 - Part No SW: 8W0 951 523 E    HW: 8W0 951 523 E
       Component: J453 MFL  H04 0002 
       Serial number: 20170126205846 22685
    
       Battery Monitoring Control Module: 
       Subsystem 3 - Part No SW: 5Q0 915 181 J    HW: 5Q0 915 181 J
       Component: J367-BDMConti  H03 1050 
       Serial number: 75410803001702052549
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 20: High Beam Assist. (J844)       Labels:* None
       Part No SW: 81A 857 511 G    HW: 81A 857 511 A
       Component: FLA           H10 0005  
       Revision: AA001001    
       Coding: 0404000700000000010000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_HighBeamAssisMXBAU33X 001003
       ROD: EV_HighBeamAssisMXBAU33X.rod
       VCID: 2C0106BA168B302712D-8078
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 22: AWD (J492)       Labels:* 0CQ-907-554.clb
       Part No SW: 0CQ 907 554 H    HW: 0CQ 525 130 
       Component: Haldex4Motion H52 7083  
       Serial number: HA1-00012.01.17
       Coding: 0001
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_AllWheelContrHA1VW37X 004013
       ROD: EV_AllWheelContrHA1VW37X_004.rod
       VCID: 4ACD6022BC3F0E17001-801E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
       Part No SW: 5Q0 905 861 A    HW: 5Q0 905 861 A
       Component: ELV-MQBA      H01 0120  
       Revision: 00000000    Serial number: 17000012657003
       Coding: 5D00000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_ELVMarquMQB 004111
       ROD: EV_ELVMarquMQB.rod
       VCID: 34311EDACEBB68E74AD-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
       Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
       Component: TSG FS        020 0041  
       Serial number: 221016EJL09914
       Coding: 001C9B205C00048000001003
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
       ROD: EV_DCUDriveSideEWMAXCONT.rod
       VCID: 43D34D069B15DF5FC37-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
       Part No SW: 5Q0 909 144 T    HW: 5Q0 909 144 R
       Component: EPS_MQB_ZFLS  129 1072  
       Coding: 8107
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_SteerAssisMQB 013144
       ROD: EV_SteerAssisMQB_013.rod
       VCID: 45D7531E9521E16FED3-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
       Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
       Component: TSG BFS       020 0041  
       Serial number: 190117EAJ11886
       Coding: 001C93205E00048000001003
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
       ROD: EV_DCUPasseSideEWMAXCONT.rod
       VCID: 42DD4802840FD657C81-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range (J745)       Labels:* None
       Part No SW: 8V0 907 357 A    HW: 7P6 907 357 B
       Component: MxB-ECU       001 0230  
       Revision: --------    Serial number: --------------
       Coding: 0EE202202B130200
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_HeadlRegulAUDIMXBAU64X 005014
       ROD: EV_HeadlRegulAUDIMXBAU64X_005_AU37.rod
       VCID: 3E253CF2F0F7B2B7AC9-806A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:* None
       Part No SW: 8V1 035 035 A    HW: 8V1 035 035 
       Component: MU-P-LND-EU   053 0875  
       Serial number: A698A0H2517001
       Coding: 01730101FF0A000011111101000A00332F002BE501700100DE
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_MUHig6C3Gen2HBAS 001115
       ROD: EV_MUHig6C3Gen2HBAS_AU37.rod
       VCID: 303912CA3AA354C72E5-8064
    
       Data medium: 
       Subsystem 1 - Part No SW: V03 959 801 FC    HW: -----------
       Component: ECE 2017  --- 0157 
       Serial number: --------------------
    
       Display unit 1 for multimedia system: 
       Subsystem 2 - Part No SW: 8V0 919 604 C    HW: 8V0 919 604 C
       Component: DU High  H49 0014 
       Serial number: AUZ8Z9G1Y00HFC      
    
       Multimedia Operating Unit: 
       Subsystem 3 - Part No SW: 8V0 919 614 BK    HW: 8V0 919 614 BK
       Component: ControlUnit_H  H85 0855 
       Serial number: ALJAL116121600010672
    
       Compact Disc Database: 
       Subsystem 4 - Part No SW: V03 959 800 EG    HW: -----------
       Component: Gracenote2  --- 1015 
       Serial number: --------------------
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 6C: Back-up Cam. (J772)       Labels:| 5Q0-980-556.clb
       Part No SW: 5Q0 980 556 B    HW: 5Q0 980 556 B
       Component: RVC Compact   H12 0231  
       Coding: 0273010102002001400040
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 006009
       ROD: EV_CamSysRVRVCPANAMQBAB_006_VW37.rod
       VCID: 392F2FEEE9D9958F99B-806C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address BB: Door Rear Drv (J388)       Labels:* None
       Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
       Component: TSG HFS       020 0041  
       Serial number: 291216ELN19535
       Coding: 000C93204000048000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCURearDriveMAXKLO 006003
       ROD: EV_DCURearDriveMAXCONT.rod
       VCID: 45D7531E9521E16FED3-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address BC: Door Rear Pass (J389)       Labels:* None
       Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
       Component: TSG HBFS      020 0041  
       Serial number: 291216ELN19538
       Coding: 000C93204000048000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCURearPasseMAXKLO 006003
       ROD: EV_DCURearPasseMAXCONT.rod
       VCID: 45D7531E9521E16FED3-8010
    
    No fault code found.
    
    End----(Elapsed Time: 01:41, VBatt start/end: 11.9V/11.9V. VIgn 11.8V)-----
    Last edited by spacebar; 11-25-2018 at 11:18 AM.

  2. #2
    Ross-Tech Employee DrPeter's Avatar
    Join Date
    Jan 2014
    Location
    16.4905° S, 151.7375° W
    Posts
    963
    Post Thanks / Like
    Hello, you could try this procedure:

    0BH - Basic Settings
    - Standstill Adaptation procedure for UDS Controllers


    Prerequisites:
    - Transmission fluid temperature greater than 15°C
    - Do NOT continue if the temp is out of specs! -
    - Advanced Measuring Values = [Control Module temperature]
    - Selector lever in [P]
    - Engine idle speed, do not press accelerator pedal
    - Parking brake and foot brake applied during the entire procedure

    - Note: Not all transmission controllers support this function



    0BH - Basic Settings Procedure

    - Be sure all the Prerequisites are followed, important! - The brake pedal must be depressed during the entire procedure.

    [Select]
    [02 - Transmission]

    [Basic Settings - UDS]
    - Select [Basic settings of transmission]

    Next click [Show Measuring Data] and select:
    - [Engine speed]
    - [Main status of abort code basic setting]
    - [Status of basic setting]
    - [Status of basic setting data for clutch]
    - [Status of basic setting data; gear selector]
    - [Sub-status of abort code basic setting]


    Then press [Go!]

    - During the basic setting procedure, there maybe some loud gear shifting noises from the transmission, this is normal.

    Basic settings may not complete successfully if:
    - The fluid temperature gets too hot.
    - Brake is released


    Once complete, there should be an indication of this in the [Status of Basic Settings].

    Then click - [Done, Go Back] and Check for fault codes.

    Hope this helps and please let us know how this works for you!

    drpeter

  3. #3
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like
    Hi, and thanks for the instructions.

    I did the basic settings and it went OK. No errors or fault codes.

    However I believe I need to drive the car for some time so the adaptive stuff is done and complete.

    I still can feel the shifting between 2 and 3 gear like before. I just hope it will be smoother over time. It’s worse on downshift, more noticeable like before.

    But can I do some more basic settings to fix this? More options to reset?
    What does this “Start double clutch fast adaptation” do?

  4. #4
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like
    Hmm... not enable to edit my previous post.
    Another thing, I’m experiencing some slight delay from when I press the throttle and the car starts to accelerate. It’s like 1 second and I feel when the clutch is releasing if that makes sense.

    Would a throttle body alignment (TBA) help?

    Thanks.

  5. #5
    Ross-Tech Employee DrPeter's Avatar
    Join Date
    Jan 2014
    Location
    16.4905° S, 151.7375° W
    Posts
    963
    Post Thanks / Like
    Hello,

    What does this “Start double clutch fast adaptation” do?
    - Unknown, sorry we do not have any information as to exactly what many of the Basic Settings and Adaptations do. Sometime we can find information and procedures when they are mentioned in technical documents, repair manuals and factory test plans. Other than that we do not have any more information, you can contact the manufacture to see if they can help, since they did design the vehicle.

    With that said, we do not have anymore information about any "more basic settings" or "more options to reset", perhaps there is something internally wrong with the transmission or check for any software updates with the transmission.

    .. You could try and perform a TBA with VCDS in the [01-Engine] controller, it would not hurt.


    drpeter

  6. Likes jyoung8607, Jack@European_Parts, Uwe liked this post
  7. #6
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like
    Thanks for the information.

    I’ve been asking my dealer about software updates for a year, but nothing. I am also talking to a company who optimise the TCU software and hopefully they can solve it. It cost a lot of money so I’m not sure yet.

    But I will try to do a TBA. I guess this is the correct page with TBA)" target="_blank">instructions and UDS for my car.

    HTML Code:
    http://wiki.ross-tech.com/wiki/index.php/Throttle_Body_Alignment_(TBA)
    Last edited by spacebar; 12-03-2018 at 11:06 AM. Reason: URL fix

  8. #7
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    14,466
    Post Thanks / Like
    Address 02: Auto Trans (J743) Labels:. 0BH-927-711.clb
    Part No SW: 0GC 300 011 R HW: 0GC 927 711 G
    Component: GSG DQ381 H06 0703 All Indexes compatible Firmware update needed?
    Last edited by Jack@European_Parts; 12-03-2018 at 12:08 PM.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  9. #8
    Verified VCDS User
    Join Date
    May 2017
    Location
    Leicestershire, UK
    Posts
    60
    Post Thanks / Like
    Another thing, I’m experiencing some slight delay from when I press the throttle and the car starts to accelerate. It’s like 1 second and I feel when the clutch is releasing if that makes sense.
    CZPB is one of the new "Budack" cycle engines. I have one of these mated to a manual transmission, and pulling away from a standstill (and driveability in general) is interesting to say the least. I took mine back to the dealer to complain about the hesitation when pulling away and they told me to use more throttle Could this be what you are experiencing?

  10. #9
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like
    Hmm, it could be. For me this happens in 2 and 3 gear. I feel that the clutch is releasing, not smooth and maybe out of sync.

    For me It’s different from a full stop to drive again. I always turn off the start/stop engine system. But for me it seems like it’s a delay because of the start/stop system and if you disable this, the software does not change its parameters.


    Some history:
    When I received the car brand new, the shifting was smooth, then it got worse after around two weeks of driving and never got better. Starting to judder and hogg in 1,2 and 3. My problem has always been that the transmissions characteristics was changing on each drive. Very random and hard to show the technicians. No errors in the system and they say it’s nothing wrong with the car. We did, after a year, change the transmission oil. No flushing tho.

    Then I bought a obd11 dongle and did the basic settings after reading that this might help. And oh boy it did. I would say 60% of my problems was gone. But nothing like when the car was brand new and first two weeks. So that’s why I bought vcds to see if can get some help and do some more.

    But here we are. No new software, Audi says everything is in order, and I’m enjoying noticeable more noise from the transmission and some random judder/hogging. So I’m still trying to solve the last 40%.

  11. #10
    Verified VCDS User
    Join Date
    Nov 2018
    Location
    Norway
    Posts
    7
    Post Thanks / Like
    Anything I can do? I dont know if there’s a new firmware update.

    Quote Originally Posted by Jack@European_Parts View Post
    Address 02: Auto Trans (J743) Labels:. 0BH-927-711.clb
    Part No SW: 0GC 300 011 R HW: 0GC 927 711 G
    Component: GSG DQ381 H06 0703 All Indexes compatible Firmware update needed?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •