Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: 2009 Jetta 2.5: 01044 - Control Module Incorrectly Coded

  1. #11
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,757
    Post Thanks / Like
    2009 Jetta - CAN Gateway - Control Module Incorrectly Coded - 01044

    Bought car, no changes or modifications AFAIK.
    The 01044 code keeps coming up.
    Is there a 'can gateway module'?
    I checked the settings, but they seemed to make sense.
    Hey my buddy Cheesy Kraft mysteries .....

    WTF is this did you forget already ?

    You disabling TPMS again?

    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: Malfunction 0010
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    62-Door, Rear Left -- Status: OK 0000
    65-Tire Pressure -- Status: Not registered 0011
    72-Door, Rear Right -- Status: OK 0000

    -------------------------------------------------------------------------------
    Address 19: CAN Gateway Labels:. 1K0-907-530-V3.clb
    Part No SW: 1K0 907 530 Q HW: 1K0 907 951
    Component: J533 Gateway H07 0062
    Revision: H07 01 Serial number: 100508F2001357
    Coding: ED807F060002021002
    Shop #: WSC 00066 000 00000
    VCID: 3560AC335C4FC7E23E-8060

    1 Fault Found:
    01044 - Control Module Incorrectly Coded
    000 - -
    Freeze Frame:
    Fault Status: 01100000
    Fault Priority: 1
    Fault Frequency: 14
    Reset counter: 255
    Mileage: 205455 km
    Time Indication: 0
    Date: 2000.00.00
    Time: 23:48:40


    -------------------------------------------------------------------------------
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  2. #12
    Verified VCDS User
    Join Date
    Nov 2016
    Location
    UK
    Posts
    165
    Post Thanks / Like
    Tricky isn't it jack, i reckon this might be a dealer only job lol

  3. Likes Jack@European_Parts, Uwe liked this post
  4. #13
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,757
    Post Thanks / Like
    Tricky isn't it jack, i reckon this might be a dealer only job lol
    Depends on if you walk to school or take a box lunch by here or by short bus?




    Kraft is always the cheesiest isn't it and always in the CAN?

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  5. #14
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Location
    HQ
    Posts
    2,000
    Post Thanks / Like
    Quote Originally Posted by rhinopower View Post
    Tricky isn't it jack, i reckon this might be a dealer only job lol
    Simple stuff.... connect to CAN Gateway, go into the Installation List, locate 65-Tire Pressure and check the box for it, then save.

    http://www.ross-tech.com/vcds/tour/i...ation-list.php
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  6. Likes Uwe liked this post
  7. #15
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,757
    Post Thanks / Like
    Simple stuff.... connect to CAN Gateway, go into the Installation List, locate 65-Tire Pressure and check the box for it, then save.

    http://www.ross-tech.com/vcds/tour/i...ation-list.php
    https://forums.ross-tech.com/showthr...orrectly-Coded

    The same deviled egg?

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  8. #16
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    Brighton, MI
    Posts
    160
    Post Thanks / Like
    Quote Originally Posted by Jef View Post
    Simple stuff.... connect to CAN Gateway, go into the Installation List, locate 65-Tire Pressure and check the box for it, then save.

    http://www.ross-tech.com/vcds/tour/i...ation-list.php
    Thanks. Will give it a try!

  9. #17
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,757
    Post Thanks / Like
    Hey Kraft

    Are you going to ask this again in couple months or are you going to remember now?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  10. #18
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,543
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Jack@European_Parts View Post
    The same deviled egg?
    Indeed, it is. Gonna merge the threads.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  11. Likes Jack@European_Parts liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •