Kick-down Basic Settings -- ECU vs TCM

   #1  
F

findalex

Verified VCDS User
Verified
Joined
Nov 4, 2018
Messages
20
Reaction score
6
Location
USA
VCDS Serial number
C?ID=95887
My transmission went into limp mode after my timing belt change. Since I disconnected the battery, I'm going to reset the transmission by doing a basic settings via VCDS:

http://wiki.ross-tech.com/wiki/index...nsmission_(01M)

Then I read this "When the 01M transmission is installed in a vehicle using the Drive-by-Wire (DBW) throttle system, the ECM (Engine Control Module) may support a Kick-own Basic Settings as described here: Automatic Transmission Basic Settings.

http://wiki.ross-tech.com/wiki/index...Basic_Settings

The procedure for Kick-down Basic Settings TCM is the same as the first link for resetting 01M.

However, I'm not sure if I need to do the basic settings in the ECM in the second link.

Should I do the kick-down basic settings in ECM too? or does the TCM reset do the same thing?

Thanks!

Alex
 
   #2  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,021
Reaction score
9,027
Location
Western PA, USA
That depends on the vehicle. Please post the Auto-Scan if possible.
 
   #3  
F

findalex

Verified VCDS User
Verified
Joined
Nov 4, 2018
Messages
20
Reaction score
6
Location
USA
VCDS Serial number
C?ID=95887
So I tried the ECM method, but when I went into group 63, it said it was not available. I guess my 2001 Golf is too old, even though it's DBW.

Here is the auto-scan, just in case I did something wrong and I am supposed to be able to do the ECM kick-down basic settings:
Code: 
Sunday,04,November,2018,13:03:08:37015
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.0.2 (x64)
Data version: 20180927 DS296.0
www.Ross-Tech.com


Mileage: 298170km-185274mi   Repair Order: 


Chassis Type: 1J - VW Golf/Bora IV (1998 > 2006)
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
          76
 
   Mileage: 298170km-185274miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 038-906-012-AGR.clb
   Part No: 038 906 012 CP
   Component: 1,9l R4 EDC G100AG  2839  
   Coding: 00001
   Shop #: WSC 00000  
   VCID: 60C45DD7E0D3344AB5-4B00

No fault code found.
Readiness: 0 0 0 0 0 

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 01M-927-733.lbl
   Part No: 01M 927 733 KA
   Component: AG4 Getriebe 01M    4836  
   Coding: 00000
   Shop #: WSC 00000  
   VCID: 79F210B36349C58292-0960

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1C0-907-37x-ABS.lbl
   Part No: 1C0 907 379 C
   Component: ABS FRONT MK60      0103  
   Coding: 0004097
   Shop #: WSC 00000 785 00200
   VCID: 2A50FFFF866FBE1AAB-513C

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 6Q0-909-605-VW5.lbl
   Part No: 6Q0 909 605 F
   Component: 07 AIRBAG VW6  0202 0004  
   Coding: 12343
   Shop #: WSC 00000  
   VCID: 3A70CFBF26CF0E9ADB-513C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1J0-920-xx5-17.lbl
   Part No: 1J0 920 905 M
   Component: A4-KOMBIINSTR. VDO V01   
   Coding: 07232
   Shop #: WSC 00000  
   VCID: 3162E893FBB9CDC26A-515A

   Subsystem 1 - Part No: IMMO
   Component: IDENTNR: VWZ7Z0Y2737314         
   IMMO-IDENTNR: VWZ7Z0Y2737314       

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901 
   Component: Gateway K<->CAN    0001  
   Coding: 00007
   Shop #: WSC 00000  
   VCID: 70E42D97303384CA25-513C

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 1J0-959-799.lbl
   Part No: 1J0 959 799 AJ
   Component: 60 Zentral-SG Komf. 0001  
   Coding: 04096
   Shop #: WSC 00000  
   VCID: 06086B4F22B7BA7AEF-4B00

   Subsystem 1 - Part No: 1J1959801C
   Component: 60 Tõrsteuerger. FS0002r  

   Subsystem 2 - Part No: 1J1959802D
   Component: 60 Tõrsteuerger. BF0002r  

   Subsystem 3 - Part No: 1J4959811C
   Component: 60 Tõrsteuerger. HL0002H  

   Subsystem 4 - Part No: 1J4959812C
   Component: 60 Tõrsteuerger. HR0002r  

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio        Labels: 1J0-035-18x-56.lbl
   Part No: 1J0 035 180 D
   Component:  RADIO 3CP         0002  
   Coding: 01401
   Shop #: WSC 00000  
   VCID: 20441DD7A053744AF5-4B00

No fault code found.

End-------------------------(Elapsed Time: 05:01)--------------------------
 
Last edited by a moderator:
   #4  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,021
Reaction score
9,027
Location
Western PA, USA
That's perfectly normal. The ALH TDIs only supported a handful of Basic Settings in the 01-Engine module (003 for EGR and 011 for Turbo) so you would have received an error in 063.

Performing the kick-down in 02-Auto trans alone is correct for this vehicle.
 
  • Like
Reactions: Uwe
You must log in or register to reply here.
Back
Top