Results 1 to 5 of 5

Thread: No cruise 2001 beetle TDI

  1. #1
    Verified VCDS User
    Join Date
    May 2016
    Location
    USA
    Posts
    524
    Post Thanks / Like

    No cruise 2001 beetle TDI

    First off, on an android here and have not transferred scan from PC , so feel free to rip me for no scan I know the drill.

    But, have no cruise, but 006-3 and 4 show it being turned off and on. Block 4 shows a 17 which might mean something as thought is just displayed 1, OR X, mine a 17.



    Only relevant code which really iS, .........was brake light switch intermittent but lights do work.

    Now before JACK rips me for FOD, there is some, and would not show in scan I presume. I did replace tail light bulbs with LED as got tired of them melting the lead off of the 1157 bulb., so possible there is not enough resistance and this is interpreted as a brake switch fault.

    Certainly can post a scan Monday, and some JPG, of switch going through the functions, just tools not in place to do that at present. Did note in 006-3, all 1's come on and off, but one numeral did not show prior speed recorded, Don't know if that is relevant?

    Also maybe will have to road test as notation stated might have to exceed 19mph to be relevant.

    LARIMORE.

  2. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,084
    Post Thanks / Like
    Larrymore did you try swapping the bulbs yet just to see?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User
    Join Date
    May 2016
    Location
    USA
    Posts
    524
    Post Thanks / Like
    JACK, not yet as seen that little tip this morning in a forum some place, but suspect it
    Might play into it as did it a few months ago and I seldom drive it, so just noticed. Will plug in some melt your plug down 1157 and see.

    LARIMORE

  5. Likes Jack@European_Parts liked this post
  6. #4
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,084
    Post Thanks / Like
    Poor car needs an IV.....it's dehydrated

    Isolate/Verify
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  7. #5
    Verified VCDS User
    Join Date
    May 2016
    Location
    USA
    Posts
    524
    Post Thanks / Like
    FYI, Jack, sold this car bought wife a 2013 beetle. But noted to buyer suspect 1157 bULB swap might be reason cruise dropped out. He replaced sockets with 1157 and cruise came back on line, just thought I would comment for further folk.

    LARIMORE

  8. Likes Uwe, Eric liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •