nicko868
New Member
Hello guys,
I am currently awaiting on forum activation but until then i thought i would post here.
I attempted to disable the auto SS from a MY18 Skoda octavia yesterday through VCDS using the method of raising the voltage set point from 7.6V to 12.1V following the path of select control module- 19 can gate way - adaption 10 - start stop voltage limit.
I was told this would work as long as the module code started with 5Q0 however when I got into the can gateway the vehicles module code was 3Q0 and the adaption box was grayed out, I got a message on screen telling me this vehicle was not supported and i needed to update the soft ware, I had updated about 2 days prior to this and I am running version 18.9.0
So my question is will this eventually become supported to do it this was, or is there another way to permanently disable the auto SS on the 3Q0 chassis
cheers guys
I am currently awaiting on forum activation but until then i thought i would post here.
I attempted to disable the auto SS from a MY18 Skoda octavia yesterday through VCDS using the method of raising the voltage set point from 7.6V to 12.1V following the path of select control module- 19 can gate way - adaption 10 - start stop voltage limit.
I was told this would work as long as the module code started with 5Q0 however when I got into the can gateway the vehicles module code was 3Q0 and the adaption box was grayed out, I got a message on screen telling me this vehicle was not supported and i needed to update the soft ware, I had updated about 2 days prior to this and I am running version 18.9.0
So my question is will this eventually become supported to do it this was, or is there another way to permanently disable the auto SS on the 3Q0 chassis
cheers guys