Hi guys, i decided test my new AID, if was working and put on my car, but i haven't odin to make a Key Matching (i'll send to my friend, but just in next month) and after check it was ok, my car have a bilion error...
I return to my old cluster, but i can't clear the errors in vcds (may be because de protection components - I not expert in this).
I tried remove baterry (15 min) and muck the steering wheel all for right and after left, drive a bit in line straight and try clear after in VCDS, but this not working.
There are any method to do in vcds and repair this?!
I return to my old cluster, but i can't clear the errors in vcds (may be because de protection components - I not expert in this).
I tried remove baterry (15 min) and muck the steering wheel all for right and after left, drive a bit in line straight and try clear after in VCDS, but this not working.
There are any method to do in vcds and repair this?!
Code:
Removed. Data from a clone/pirate copy of VCDS is not welcome here.
Last edited by a moderator:
