Forced OBD readiness with VCDS

   #1  

amizan

Verified VCDS User
Verified
Joined
Nov 23, 2017
Messages
57
Reaction score
11
Location
USA
VCDS Serial number
C?ID=340128
I have done a repair on a 2012 Touareg TDI with the help of VCDS but my OBD readiness is not resetting.

I saw some postings that tests can be run with the old Vag-com but my VCDS interface does not support those in Basic Settings.

Is there a way to force OBD II readiness with VCDS.

right now, when I click "readiness", in the engine module, it is stating that all systems are ready, however when I click OBD-II functions and hit on OBD readiness, two of the modules are not ready

O2 heating
Catalytic Converter

Does anyone know how to force them to be ready with a test or something? I have driven 300 miles already and they have not reset.
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
There is no way to "Force Readiness" on any vehicle. You may be able to force certain tests, but there's always the question whether all proper conditions have been met.

Looking at the data for your ECU, there don't seem to be tests explicitly for O2 Heating or the Catalytic Converter, but there is:

IDE00553 -- Automatic test sequence

However, I don't have an actual procedure for it.

-Uwe-
 
   #3  

amizan

Verified VCDS User
Verified
Joined
Nov 23, 2017
Messages
57
Reaction score
11
Location
USA
VCDS Serial number
C?ID=340128
There is no way to "Force Readiness" on any vehicle. You may be able to force certain tests, but there's always the question whether all proper conditions have been met.

Looking at the data for your ECU, there don't seem to be tests explicitly for O2 Heating or the Catalytic Converter, but there is:

IDE00553 -- Automatic test sequence

However, I don't have an actual procedure for it.

-Uwe-

So the two monitor had not shown ready after driving 500 miles BUT CA BAR rules say that a Diesel can pass smog with two monitors ready (only EVAP for gas cars) which the smog guy didn't know. So all set and roadworthy finally! Thank you and VCDS for making this project succcesful !!
 
   #5  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
Reset my service interval and and may have deleted some codes and now I can't get car inspected because of OBD readiness issues. Any clues how to speed this up to return to inspection station ?
Code:
Tuesday,09,July,2019,14:54:00:30397
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 19.6.1.0 (x64)  HEX-NET CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com


VIN: WAURNAF48HN070849   License Plate: EGR



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Mode 01 - PID 01 : Readiness  --  Address 7E8

Number of DTCs stored: 0  --  MIL Status: MIL OFF
Misfire monitoring:  Passed
Fuel System:  Passed
Comprehensive Components:  Passed
Catalyst monitoring:  Passed
Heated catalyst monitoring: Not installed.
Evaporative system monitoring:  Failed or Incomplete
Secondary air system monitoring: Not installed.
A/C system refrigerant monitoring: Not installed.
Oxygen sensor monitoring:  Passed
Oxygen sensor heater monitoring:  Passed
Exhaust Gas Recirculation:  Failed or Incomplete

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Readiness Status: 1000 0100
Exhaust Gas Recirculation: Failed or Incomplete
Oxygen Sensor Heating: Passed
Oxygen Sensor(s): Passed
Air Conditioning: Passed
Secondary Air Injection: Passed
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Passed



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Readiness Status: 1000 0100
Exhaust Gas Recirculation: Failed or Incomplete
Oxygen Sensor Heating: Passed
Oxygen Sensor(s): Passed
Air Conditioning: Passed
Secondary Air Injection: Passed
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Passed



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Readiness Status: 1000 0100
Exhaust Gas Recirculation: Failed or Incomplete
Oxygen Sensor Heating: Passed
Oxygen Sensor(s): Passed
Air Conditioning: Passed
Secondary Air Injection: Passed
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Passed



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Readiness Status: 1000 0100
Exhaust Gas Recirculation: Failed or Incomplete
Oxygen Sensor Heating: Passed
Oxygen Sensor(s): Passed
Air Conditioning: Passed
Secondary Air Injection: Passed
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Passed
 
   #6  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Reset my service interval and and may have deleted some codes and now I can't get car inspected because of OBD readiness issues. Any clues how to speed this up to return to inspection station ?
That's this car, right?
https://forums.ross-tech.com/showthread.php?14425

I would try this Basic Setting in the Engine:
IDE00553 -- Automatic test sequence

After initiating Basic Settings, the hold a foot on the brake pedal and floor the accelerator pedal. The ECU will then holdd different RPM points and run through all of the tests. While in Basic Settings, the Show Measuring Data button be used to display "IDE00727 Test steps still to be performed" or similar to watch the remaining steps count down to zero.

-Uwe-
 
   #7  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
Thanks for the quick response, it is in fact the same car but it has a manual transmission, can I put it in first with e brake and wheel chock and perform the same procedure just letting up a little on the clutch? I have also read that if you have a full tank of gas the evap monitor may not perform a test.
 
   #8  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Thanks for the quick response, it is in fact the same car but it has a manual transmission, can I put it in first with e brake and wheel chock and perform the same procedure just letting up a little on the clutch? I have also read that if you have a full tank of gas the evap monitor may not perform a test.
On an automatic car, this would be done with the shifter in Park. On a manual car: Neutral. Service brake must be held. There should be no need to touch the clutch.

-Uwe-
 
   #9  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
So I am basically flooring the car in neutral?
 
   #10  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
So I am basically flooring the car in neutral?
Yes, but only after initiating the Basic Setting, and while holding the brake pedal firmly with your left foot. Assuming the Basic Setting is active, the ECU should then run the engine at the speeds it deems necessary to conduct the tests.

-Uwe-
 
   #11  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
Got it, out to the garage I go
 
   #12  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
Well right you are again, the only thing left is the Evap system but I do have a full tank of gas and I believe that has to be between 1/3 to 3/4 full for that to reset itself, so i will do some driving. Fantastic support, thanks so much and I will post later!

Code:
Tuesday,09,July,2019,18:29:56:30397
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 19.6.1.0 (x64)  HEX-NET CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com


VIN: WAURNAF48HN070849   License Plate: TEST SYSTEMS



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Readiness Status: 0000 0100
Exhaust Gas Recirculation: Passed
Oxygen Sensor Heating: Passed
Oxygen Sensor(s): Passed
Air Conditioning: Passed
Secondary Air Injection: Passed
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Passed
 
   #13  

Moxnix

Verified VCDS User
Verified
Joined
Apr 13, 2014
Messages
127
Reaction score
22
Location
USA
VCDS Serial number
C?ID=212386
Done and done

Thanks to the software and advice emission inspection was no problem.

Well right you are again, the only thing left is the Evap system but I do have a full tank of gas and I believe that has to be between 1/3 to 3/4 full for that to reset itself, so i will do some driving. Fantastic support, thanks so much and I will post later!
 
Last edited by a moderator:
   #14  

spelk3

Verified VCDS User
Verified
Joined
May 2, 2016
Messages
6
Reaction score
2
Location
USA
VCDS Serial number
C?ID=274542
I need to get my 2015 Gti smog check done in California. All of the tests are ready except the fuel system. Is there anyway to get the fuel system monitor “ready”? I’ve driven through several tanks of gas but the fuel system stays “not ready”. Car is stock except for the intercooler. ECU was reset at the 30k service.
 
   #15  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
I need to get my 2015 Gti smog check done in California. All of the tests are ready except the fuel system. Is there anyway to get the fuel system monitor “ready”? I’ve driven through several tanks of gas but the fuel system stays “not ready”. Car is stock except for the intercooler. ECU was reset at the 30k service.
So this car has an aftermarket intercooler, but it isn't chipped? :confused:

Please post an Auto-Scan and also the OBD-II Mode 9 data.

-Uwe-
 
   #16  

spelk3

Verified VCDS User
Verified
Joined
May 2, 2016
Messages
6
Reaction score
2
Location
USA
VCDS Serial number
C?ID=274542
So this car has an aftermarket intercooler, but it isn't chipped? :confused:

Please post an Auto-Scan and also the OBD-II Mode 9 data.

-Uwe-

Car was custom tuned, ECU and TCU using Accessport. Accessport was completely uninstalled and car returned to stock before the 30k service. Sold the car to a friend straight from the mechanic. He’s been driving it since mid December and the only monitor that is not ready is the fuel system.

I should have access to the car tomorrow and I’ll get the scans.
 
   #17  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
What are modes in VCDS OBD2 0x33?

Modes 01-01, 03, 07, 09

Please post ALL data.
 
   #18  

spelk3

Verified VCDS User
Verified
Joined
May 2, 2016
Messages
6
Reaction score
2
Location
USA
VCDS Serial number
C?ID=274542
So this car has an aftermarket intercooler, but it isn't chipped? :confused:

Please post an Auto-Scan and also the OBD-II Mode 9 data.

-Uwe-

Code:
Tuesday,25,February,2020,10:53:55:64160
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.2.2 (x64)
Data version: 20200210 DS308.0
www.Ross-Tech.com


VIN: 3VW4T7AU4FM036473   License Plate: 


Chassis Type: AU-VW37 (5Q0)
Scan: 01 02 03 08 09 15 16 17 19 42 44 52 5F 75 A9

VIN: 3VW4T7AU4FM036473   Mileage: 50839km-31589miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
5F-Information Electr. -- Status: OK 0000
75-Telematics -- Status: OK 0000
A9-Struct. Borne Sound -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (J623-CXCA)       Labels:. 06K-907-425-V1.clb
   Part No SW: 5G0 906 259 A    HW: 06K 907 425 B
   Component: 2.0l R4 TFSI  H13 0005  
   Revision: --H13---    
   Coding: 091D00124424002F0000
   Shop #: WSC 00066 790 00221
   ASAM Dataset: EV_ECM20TFS0205G0906259A 001007
   ROD: EV_ECM20TFS0205G0906259A.rod
   VCID: 2C79FEF947F1972F29-8078

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
   Part No SW: 0D9 300 041 T    HW: 02E 927 770 AQ
   Component: DQ250-6F MQB  H53 4511  
   Revision: 03253104    Serial number: TFK01407160154
   Coding: 0014
   Shop #: WSC 00066 790 00221
   ASAM Dataset: EV_TCMDQ250021 001001
   ROD: EV_TCMDQ250021.rod
   VCID: 297707ED48038207D2-807C

1 Fault Found:
10763 - Starter Enable from Selector Lever Sensor System 
          P1734 00 [002] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear


-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-ESP-V1.clb
   Part No SW: 5Q0 907 379 K    HW: 5Q0 907 379 F
   Component: ESC           H31 0371  
   Revision: 00000000    Serial number: 52324000000257
   Coding: 01FA6BA134230972007B020781C62980D62C9000408194B400430050C009
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_Brake1UDSContiMK100ESP 033001
   ROD: EV_Brake1UDSContiMK100ESP_033_VW37.rod
   VCID: 44A9B659CF617F6FC1-8010

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels:| 5G0-907-426.clb
   Part No SW: 5G0 907 426 R    HW: 5G0 907 426 R
   Component: AC Manuell    H02 0907  
   Revision: 00001K06    
   Coding: 00020004200100000000000012000000
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_ACManueBHBVW37X 003019
   ROD: EV_ACManueBHBVW37X_003.rod
   VCID: 3A55C8A1BDA5399FAB-806E

   Fresh Air Blower Front: 

   Geber für Kältemitteldruck/Kältemitteltemperatur: 

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 087 N    HW: 5Q0 937 087 N
   Component: BCM PQ37BOSCH 028 0106  
   Revision: --------    Serial number: 86580909140633
   Coding: 000018464041804969E44000001407201000000000000000000000000000
   Shop #: WSC 00066 790 00074
   ASAM Dataset: EV_BodyContrModul1UDSBosc 013004
   ROD: EV_BCMBOSCH_013.rod
   VCID: 46ADAC51F95D4D7FDF-8012

   Control Unit For Wiper Motor: 
   Subsystem 1 - Part No SW: 5GM 955 119     HW: 5GM 955 119   Labels: 5QX-955-119-V1.CLB
   Component: WWS    140720  043 0581 
   Serial number:         140930225756
   Coding: 0E4DDD

1 Fault Found:
329480 - Heated Passenger Seat 
          B1806 F0 [008] - Safety Shut-Off due to Occupant Detection
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 73
                    Reset counter: 185
                    Mileage: 49733 km
                    Date: 2020.02.05
                    Time: 11:48:58


-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 T    HW: 5Q0 959 655 T
   Component: AirbagVW20    009 0825  
   Serial number: 003MHM0112ZH
   Coding: 8CCCFC00000000005000001AC24800000065
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002138
   ROD: EV_AirbaVW20SMEVW37X.rod
   VCID: 51878F0D00139AC77A-8004

   Occupant Detection: 
   Subsystem 1 - Part No SW: 4M0 959 339 A    HW: 4M0 959 339 A
   Component: BF-Gewichtss.  H05 0016 
   Serial number: IBH0000J140001D3KF0-
   Coding: 30325A

   Side Sensor Driver Front: 
   Subsystem 2 - Part No SW: -----------    HW: 480 000 708 14
   Component: SideSensor_Df  001 0887 
   Serial number: 3570000000053685C01C
   Coding: 2D2D2D

   Side Sensor Passenger Front: 
   Subsystem 3 - Part No SW: -----------    HW: 480 000 508 14
   Component: SideSensor_Pf  001 0887 
   Serial number: 35800000000B52A0A01C
   Coding: 2D2D2D

   Side Sensor Driver Rear: 
   Subsystem 4 - Part No SW: -----------    HW: 480 401 108 14
   Component: SideSensor_Dr  001 6149 
   Serial number: 3510002B516DB811C22+
   Coding: 2D2D2D

   Side Sensor Passenger Rear: 
   Subsystem 5 - Part No SW: -----------    HW: 480 401 108 14
   Component: SideSensor_Pr  001 6149 
   Serial number: 3520002B516DB813106Z
   Coding: 2D2D2D

   Front Sensor Driver: 
   Subsystem 6 - Part No SW: -----------    HW: 480 402 107 14
   Component: FrontSensor_D  001 6149 
   Serial number: 3550002C515F3C325181
   Coding: 2D2D2D

   Front Sensor Passenger: 
   Subsystem 7 - Part No SW: -----------    HW: 480 402 107 14
   Component: FrontSensor_P  001 6149 
   Serial number: 3560002C715F3C30D315
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J524)       Labels:| 5Q0-953-549.clb
   Part No SW: 5Q0 953 521 P    HW: 5Q0 953 569 A
   Component: Lenks.Modul   075 0175  
   Revision: FF032032    Serial number: 20140804500089
   Coding: 0410
   Shop #: WSC 66564 385 16448
   ASAM Dataset: EV_SMLSVALEOMQB 001015
   ROD: EV_SMLSVALEOMQB.rod
   VCID: 3FA3B9B5A6871CB79C-806A

1 Fault Found:
617752 - Selector Lever Park Position Lock Switch 
          B1162 29 [008] - Signal Implausible
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 166
                    Mileage: 50482 km
                    Date: 2020.02.17
                    Time: 08:57:38

                    Ubat 30 Voltage: 14.30 V
                    Ignition State: On
                    Terminal 15: 13.50 V
                    A/D #1: 0.00 %
                    A/D #2: 0.00 %
                    A/D #3: 0.00 %


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G1 920 856     HW: 5G1 920 856 
   Component: KOMBI         342 4270  
   Coding: 0BBD090A2180CF0502087A001000000000000000
   Shop #: WSC 00066 790 00221
   ASAM Dataset: EV_DashBoardVDDMQBAB 009037
   ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
   VCID: 6BFB3DE5827F501760-803E

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 S    HW: 5Q0 907 530 L
   Component: GW MQB Mid    211 2186  
   Revision: --------    Serial number: 22081410001813
   Coding: 0101000820085900EF0000281C0F00000001050000000000000000000000
   Shop #: WSC 00066 790 07026
   ASAM Dataset: EV_GatewConti 011017
   ROD: EV_GatewConti_011.rod
   VCID: 41A7BF4DD0736A47EA-8014

   Alternator: 

   Multi Function Steering Wheel Control Module: 
   Subsystem 2 - Part No SW: 5G0 959 442 Q    HW: 5G0 959 442 Q  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H10 0101 
   Serial number: 29140001587730094323
   Coding: 29FFFF

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q0 959 593 B    HW: 5Q0 959 593 B
   Component: TSG FS        020 0025  
   Serial number: 100914060500QK
   Coding: 003E03200000040000000000
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: 40A1BA49DB79634FE5-8014

   Drivers Door Rear Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 811 A    HW: 5Q0 959 811 A  Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_DRV  005 0005 
   Serial number: 00000000000003513103
   Coding: 011000

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 F    HW: 3Q0 909 144 F
   Component: EPS_MQB_ZFLS  503 5043  
   Coding: 8102
   Shop #: WSC 00066 790 00221
   ASAM Dataset: EV_SteerAssisMQB 010031
   ROD: EV_SteerAssisMQB_010.rod
   VCID: 354FDB9D94BBD6E746-8060

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 B    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0025  
   Serial number: 100914060502LY
   Coding: 003E03200000040000000000
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: 3FA3B9B5A6871CB79C-806A

   Passengers Rear Door Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 812 A    HW: 5Q0 959 812 A  Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_PSG  005 0005 
   Serial number: 00000000000003615340
   Coding: 191000

1 Fault Found:
65588 - Motor for Window Regulator 
          B1487 54 [008] - Missing Calibration / Basic Setting
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 148
                    Mileage: 50024 km
                    Date: 2020.02.08
                    Time: 16:30:08


-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD1.clb
   Part No SW: 5G0 035 844     HW: 5G0 035 844 
   Component: MU-S-S-US     014 0645  
   Serial number: V7B01608141195
   Coding: 02730000FF00000021220001001800001F0203040100010002
   Shop #: WSC 00066 790 07026
   ASAM Dataset: EV_MUStd4CPASE 002040
   ROD: EV_MUStd4CPASE_VW37.rod
   VCID: 64E956D96FA11F6F21-8030

   Operating And Display Unit 1: 
   Subsystem 1 - Part No SW: 5G0 919 605 H    HW: 5G0 919 605 H
   Component: ABT_Std_Plus  H60 0030 
   Serial number: VWZ8Z9PS500L03      

No fault code found.

-------------------------------------------------------------------------------
Address 75: Telematics (J949)       Labels:| 5QE-035-285.clb
   Part No SW: 5QE 035 285     HW: 5QE 035 285 
   Component: OCULowMQBUS   006 0528  
   Coding: 02730002C2821A017F1E06000000
   Shop #: WSC 00066 790 00123
   ASAM Dataset: EV_OCULowMQB 001003
   ROD: EV_OCULowMQB.rod
   VCID: 0225704195F5B15FB3-8056

1 Fault Found:
2103041 - Control Module 
          B1788 F0 [009] - Start Prohibition Deactivated
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 8
                    Fault Frequency: 1
                    Reset counter: 146
                    Date: 2000.00.00
                    Time: 00:00:00


-------------------------------------------------------------------------------
Address A9: Struct. Borne Sound (J869)       Labels: 4H0-907-159.clb
   Part No SW: 5G0 907 159     HW: 4H0 907 159 A
   Component: SAS-GEN 2     H06 0014  
   Serial number: 140724201680
   ASAM Dataset: EV_SoundActuaGen2AU64X 003010
   ROD: EV_SoundActuaGen2AU64X.rod
   VCID: 6BFB3DE5827F501760-803E

No fault code found.

End-------------------------(Elapsed Time: 03:20)--------------------------

mode 9
Code:
Tuesday,25,February,2020,11:07:28:64160
VCDS Release 19.6.2 (x64):  Generic OBD2
Mode 9 : Calibration Identification

Type 02 - VIN : 3VW4T7AU4FM036473 (Address E8)
Type 04 - Calibration ID : 5G0259A 0005AXAJ (Address E8)
Type 04 - Calibration ID : 0D9300041T  4511 (Address E9)
Type 06 - Calibration Verification Number : AC61822F (Address E8)
Type 06 - Calibration Verification Number : 0000D6C1 (Address E9)
Type 08 - In-use performance tracking :
    OBD Monitoring Conditions Encountered count : 143
    Ignition cycle count : 464
    Conditions completion count / Specified conditions encountered count
         Catalyst monitor bank 1 : 103 / 137
         Catalyst monitor bank 2 : 0 / 0
         O2 Sensor monitor bank 1 : 174 / 137
         O2 Sensor monitor bank 2 : 0 / 0
         EGR-VVT monitor : 82 / 119
         AIR monitor : 73 / 31
         EVAP monitor : 18 / 30
         Secondary O2 Sensor monitor bank 1 : 93 / 137
         Secondary O2 Sensor monitor bank 2 : 0 / 0
Type 0A - Controller Name : ECM- (Address E8)
Type 0A - Controller Name : TCM- (Address E9)

mode 1-01
Code:
Tuesday,25,February,2020,10:59:17:64160
VCDS Release 19.6.2 (x64):  Generic OBD2
Mode 01 - PID 01 : Readiness  --  Address 7E8

Number of DTCs stored: 0  --  MIL Status: MIL OFF
Misfire monitoring:  Passed
Fuel System:  Failed or Incomplete
Comprehensive Components:  Passed
Catalyst monitoring:  Passed
Heated catalyst monitoring: Not installed.
Evaporative system monitoring:  Passed
Secondary air system monitoring:  Passed
A/C system refrigerant monitoring: Not installed.
Oxygen sensor monitoring:  Passed
Oxygen sensor heater monitoring:  Passed
Exhaust Gas Recirculation:  Passed
 
Last edited:
  • Like
Reactions: Uwe
   #19  

spelk3

Verified VCDS User
Verified
Joined
May 2, 2016
Messages
6
Reaction score
2
Location
USA
VCDS Serial number
C?ID=274542
mode 3
Code:
Thursday,27,February,2020,11:01:41:64160
VCDS Release 19.6.2 (x64):  Generic OBD2
Mode 03: Emission related fault codes

Address 7E8: No fault code found.

Address 7E9: No fault code found.

mode 7
Code:
Thursday,27,February,2020,11:02:45:64160
VCDS Release 19.6.2 (x64):  Generic OBD2
Mode 07: Pending emission related fault codes

Address 7E8: No fault code found.

Address 7E9: No fault code found.

mode 9
Code:
Thursday,27,February,2020,11:08:59:64160
VCDS Release 19.6.2 (x64):  Generic OBD2
Mode 9 : Calibration Identification

Type 02 - VIN : 3VW4T7AU4FM036473 (Address E8)
Type 04 - Calibration ID : 5G0259A 0005AXAJ (Address E8)
Type 04 - Calibration ID : 0D9300041T  4511 (Address E9)
Type 06 - Calibration Verification Number : AC61822F (Address E8)
Type 06 - Calibration Verification Number : 0000D6C1 (Address E9)
Type 08 - In-use performance tracking :
    OBD Monitoring Conditions Encountered count : 148
    Ignition cycle count : 480
    Conditions completion count / Specified conditions encountered count
         Catalyst monitor bank 1 : 107 / 142
         Catalyst monitor bank 2 : 0 / 0
         O2 Sensor monitor bank 1 : 180 / 142
         O2 Sensor monitor bank 2 : 0 / 0
         EGR-VVT monitor : 84 / 122
         AIR monitor : 75 / 33
         EVAP monitor : 20 / 32
         Secondary O2 Sensor monitor bank 1 : 97 / 142
         Secondary O2 Sensor monitor bank 2 : 0 / 0
Type 0A - Controller Name : ECM-EngineControl (Address E8)
Type 0A - Controller Name : TCM-TransmisCtrl (Address E9)
 
Last edited:
  • Like
Reactions: Uwe
   #20  

spelk3

Verified VCDS User
Verified
Joined
May 2, 2016
Messages
6
Reaction score
2
Location
USA
VCDS Serial number
C?ID=274542
Still have the fuel system monitor “not ready”. Any ideas?
 
Back
Top