Passat B8 retrofit mode button and app connect

   #1  

pollopopo

Active Member
Joined
Oct 13, 2018
Messages
15
Reaction score
0
Location
Italy
Hello guys, I wanted to retrofit some functions in my passat b8 of mid-2015, unfortunately it is much less immediate than renault, in them I was enough to activate the functions and not encode them with bits etc ...

I have the obd eleven pro interface but if necessary I can buy the necessary for VCDS

-I wanted to enable the mode key and esp https://urly.it/3p4g
-I wanted to enable app connect, I have the MIB 2 H41 firmware 179 that shows only mirrorlink and car net, I saw online that enable it by changing the USB and with an update that unfortunately I can not find, you have concrete ideas about

I apologize for the bad English
 
   #2  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,989
Reaction score
7,823
Location
Westbury, UK
VCDS Serial number
C?ID=1423
This forum is to support VCDS owners, have you tried posting on the OBDEleven forum?

Failing that to get support here we'll need to see a full LEGAL VCDS Auto-Scan of your car - maybe a friend with VCDS could do a scan for you?
 
   #3  

golfi_vend

Verified VCDS User
Verified
Joined
Apr 9, 2014
Messages
2,304
Reaction score
2,252
Location
Tartu, Estonia
VCDS Serial number
C?ID=195131
Altough VCDS is a good tool, it won't help in this case.

App-Connect is MY16 feature and if Your current config doesn't even show CarPlay or AndroidAuto logo, You have MIB1 which just doesn't support it.
Mode function is SWAP meaning You need to buy whole kit from dealer and let them(or 3rd party) activate it via connection to VW servers.

End of story.
 
  • Like
Reactions: Uwe
   #4  

pollopopo

Active Member
Joined
Oct 13, 2018
Messages
15
Reaction score
0
Location
Italy
Altough VCDS is a good tool, it won't help in this case.

App-Connect is MY16 feature and if Your current config doesn't even show CarPlay or AndroidAuto logo, You have MIB1 which just doesn't support it.
Mode function is SWAP meaning You need to buy whole kit from dealer and let them(or 3rd party) activate it via connection to VW servers.

End of story.

i have this, https://www.ebay.it/itm/3G0035043-V...D-SD-Navi-Navirechner-main-unit-/263284633864 he is the mib 2 (I checked personally through the code) ... unfortunately the first were not enabled to connect, in the passat was before 2016, in the golf started from 2016

see this video, https://www.youtube.com/watch?v=mBcmgAcG96A, I'm in the usual situation, he with a software update (and you'll see the updated usb) managed to have app connect :) .... why do not I ask them ?, simple you go from 500 to 700 euros for this trivial operation !!!!!!!!!!!!!

i need this firmware MHI2_ER_VWG11_P2125

PetrolDave

obd eleven is almost equal to vcds as potential, if I am told where to touch what bit level or similar I should not have problems. However I will try to ask them too.
 
Last edited:
Back
Top