Edited to add VCDS interface used.
Just [Re]run the Optical Bus Scan against my recently acquired A8 D4 2016 with my Hex+CAN USB interface. As before, it almost finishes [green bar almost at the end] when I get the Windows 'box' saying:
"Please Upgrade to a current Ross Tech Interface - Only Current Generation interfaces support this feature"
--> A screenshot is available but not attached as I'm apparently not allowed to post attachments according to my 'posting permissions'.
I then get the 'optical devices' screen with the electrical and optical fields marked with "???"
Julian Hicks
Just [Re]run the Optical Bus Scan against my recently acquired A8 D4 2016 with my Hex+CAN USB interface. As before, it almost finishes [green bar almost at the end] when I get the Windows 'box' saying:
"Please Upgrade to a current Ross Tech Interface - Only Current Generation interfaces support this feature"
--> A screenshot is available but not attached as I'm apparently not allowed to post attachments according to my 'posting permissions'.
I then get the 'optical devices' screen with the electrical and optical fields marked with "???"
Code:
Wednesday,10,October,2018,11:49:09:53697
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86
VCDS Version: 18.9.0.2
Data version: 20180927 DS296.0
www.Ross-Tech.com
VIN: WAUZZZ4H4GN002801 License Plate: H
Mileage: 47298km-29389mi Repair Order:
Control Module Part Number: 4H0 907 468 AG
Component and/or Version: J533--Gateway H14 0083
Optical Bus Diagnostic : Standard
Controller Electrical Optical
Only current generation interfaces support this feature. ??? ???
CAN Gateway ??? ???
Instruments ??? ???
TV Tuner ??? ???
Radio ??? ???
Sound System ??? ???
************************************************************
Julian Hicks
Last edited: