Hello, we are swapping gearbox from DSG to Manual and almost all units were recoded to manual gearbox but VCDS don't have help tags for ABS Unit Coding and I need Your help.
So here is info about ABS Unit:
VIN: WVWZZZ3CZ9E527109
Przebieg: 195201km
Adres 03: ABS/hamulce Plik etykiet: 3C0-614-109-C4.clb
Oznaczenie elementu SW: 3C0 614 109 P HW: 3C0 614 109 P
Komponent: J104 C4 440 V2 0011
Weryfikacja: --025--- Numer seryjny: 00000786096148
Kodowanie: 0002325
Kod serwisu: WSC 00352 211 60439
VCID: 2B03F9095F061E5FF43-807E
Znaleziono 1 błąd:
01315 - Sterownik skrzyni biegów
004 - Brak sygnału / brak komunikacji
Ramka zamrożona:
Stan błędu: 01100100
Priorytet błędu: 3
Częstość błędu: 1
Wew.licznik błędów: 7
Przebieg: 195201 km
Wskaźnik czasu: 0
Data: 2013.02.11
Czas: 23:06:14
Ramka zamrożona:
Prędkość: 0.0 km/h
Wartość Hex: 0x0000
Napięcie: 11.50 V
Bity binarnie: 00011111
Zliczanie: 151
Wartość Hex: 0x0000
If it's possible please type me the proper coding for ABS Unit for Manual 6gear gearbox.
There is also a DTC Stored in ECU:
049409 - Brak komunikacji ze sterownikiem skrzyni biegów
U0101 - 000 - - MIL zapalona
But that i will sort by disabling it in EDC17CP14 ECU, so thats not the problem (ECU it self can't be recoded to manual - tested, so that is the only way to make it working without MIL On).
Thank You,
Daron
So here is info about ABS Unit:
VIN: WVWZZZ3CZ9E527109
Przebieg: 195201km
Adres 03: ABS/hamulce Plik etykiet: 3C0-614-109-C4.clb
Oznaczenie elementu SW: 3C0 614 109 P HW: 3C0 614 109 P
Komponent: J104 C4 440 V2 0011
Weryfikacja: --025--- Numer seryjny: 00000786096148
Kodowanie: 0002325
Kod serwisu: WSC 00352 211 60439
VCID: 2B03F9095F061E5FF43-807E
Znaleziono 1 błąd:
01315 - Sterownik skrzyni biegów
004 - Brak sygnału / brak komunikacji
Ramka zamrożona:
Stan błędu: 01100100
Priorytet błędu: 3
Częstość błędu: 1
Wew.licznik błędów: 7
Przebieg: 195201 km
Wskaźnik czasu: 0
Data: 2013.02.11
Czas: 23:06:14
Ramka zamrożona:
Prędkość: 0.0 km/h
Wartość Hex: 0x0000
Napięcie: 11.50 V
Bity binarnie: 00011111
Zliczanie: 151
Wartość Hex: 0x0000
If it's possible please type me the proper coding for ABS Unit for Manual 6gear gearbox.
There is also a DTC Stored in ECU:
049409 - Brak komunikacji ze sterownikiem skrzyni biegów
U0101 - 000 - - MIL zapalona
But that i will sort by disabling it in EDC17CP14 ECU, so thats not the problem (ECU it self can't be recoded to manual - tested, so that is the only way to make it working without MIL On).
Thank You,
Daron