Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: No Response from Module

  1. #1
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    USA
    Posts
    5
    Post Thanks / Like

    No Response from Module

    Hi,

    Not sure if it's my car, a setting or something else, so I'm posting this here. I've got a 2004 VW TDI New Beetle. What I had hoped to do was to disable the daytime running lights, as I keep having to replace the headlight bulbs. However, when I try to access the Cent. Electric module (09 I believe), I get a No Response from Module message.

    Is that module not available to access for my year/make, is there a setting I need to change in the software?

    I did an Auto-Scan, which does not show that module as scanned:

    Saturday,15,September,2018,10:01:04:55135
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.2.1.2 (x64) HEX-V2 CB: 0.4411.4
    Data version: 20180518 DS287.1
    www.Ross-Tech.com


    VIN: notpostinghere License Plate: also not posting
    Mileage: 227540km-141386mi Repair Order:

    --------------------------------------------------------------------------------
    Chassis Type: 1C (1C - VW New Beetle (1998 > 2010))
    Scan: 01 02 03 08 15 17 19 25 29 35 37 39 46 54 56 65 75

    VIN: notpostinghere Mileage: 227540km-141386miles

    Any suggestions/thoughts appreciated. Thanks!

    Dan

  2. #2
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    Northwest UK
    Posts
    757
    Post Thanks / Like
    Hi Dan

    We need to see a full autoscan to be able to help.

  3. #3
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    USA
    Posts
    5
    Post Thanks / Like
    I can do that. Wasn't sure if you needed everything. Should have searched better before I posted.

    Code:
    Saturday,15,September,2018,10:01:04:55135
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.2.1.2 (x64)  HEX-V2 CB: 0.4411.4
    Data version: 20180518 DS287.1
    www.Ross-Tech.com
    
    
    VIN: 3VWCR31C04M419947   License Plate: 5KWR419
    Mileage: 227540km-141386mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 1C (1C - VW New Beetle (1998 > 2010))
    Scan: 01 02 03 08 15 17 19 25 29 35 37 39 46 54 56 65 75
     
    VIN: 3VWCR31C04M419947   Mileage: 227540km-141386miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 038-906-016-BEW.lbl
       Part No SW: 038 997 016 M    HW: 028 101 114 7
       Component: R4 1,9L EDC G000SG  2878  
       Revision: 12345678    Serial number: VWZ5Z0D2227040
       Coding: 0150031
       Shop #: WSC 22595 444 58789
       VCID: 280904CC0EEE6EB7197-5160
    
    1 Fault Found:
    16725 - Camshaft Position Sensor (G40) 
                P0341 - 000 - Implausible Signal - Intermittent
                 Freeze Frame:
                        RPM: 882 /min
                        Torque: 40.0 Nm
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 14.21 V
                        Bin. Bits: 00101000
                        Idle Stabilization: 0.0°KW
                        (no units): 48.0
    
    Readiness: 0 0 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1C0-907-37x-ESP-F.lbl
       Part No: 1C0 907 379 M
       Component: ESP FRONT MK60      0102  
       Coding: 0019458
       Shop #: WSC 00028 000 00000
       VCID: 3431E0BCC2261A57A5F-5160
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 1T0-909-605.lbl
       Part No: 6Q0 909 605 AG
       Component: 01 AIRBAG VW71      0710  
       Coding: 0012337
       Shop #: WSC 00066 000 00000
       VCID: 7CA1089CAAF612172DF-5160
    
       Subsystem 1 - Part No: 1C0 959 339 
       Component: BF-Gewichtsens004 ·
    
    3 Faults Found:
    02511 - Control Module for Seat Occupied Recognition (J706) 
                014 - Defective
    00592 - Seat Belt Switch; Passenger (E25) 
                007 - Short to Ground - Intermittent
    01221 - Crash Sensor Side Airbag; Driver Side (G179) 
                004 - No Signal/Communication - Intermittent
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 1C0-920-x4x.lbl
       Part No: 1C0 920 951 A
       Component: KOMBI+WEGFAHRS. M73 V02  
       Coding: 11232
       Shop #: WSC 02408  
       VCID: 1F1B1F105EA0A90F68D-4B1E
       3VWCR31C04M419947     VWZ5Z0D2227040
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: Gateway K<->CAN    V022  
       Coding: 00006
       Shop #: WSC 00028  
       VCID: 70B92CACF3BE6677817-4B1E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 1C0-959-799.lbl
       Part No: 1C0 959 799 G
       Component: 2K Komfortgerát HLO 0004  
       Coding: 00064
       Shop #: WSC 00066  
       VCID: 3B23CB80EA78D52F645-4B1E
    
       Subsystem 1 - Part No: 1C2959802A
       Component: 2K Tőrsteuer.FS KLO 0202  
    
       Subsystem 2 - Part No: 1C2959801A
       Component: 2K Tőrsteuer.BF KLO 0202  
    
    1 Fault Found:
    01044 - Control Module Incorrectly Coded 
                35-00 -  - 
    
    End----------(Elapsed Time: 03:40, VBatt start/end: 13.8V/13.8V)-----------

  4. #4
    Verified VCDS User
    Join Date
    Oct 2017
    Location
    Northwest UK
    Posts
    757
    Post Thanks / Like
    This does not appear to be a proper autoscan. What cable are you using? In my signature is a link on how to perform a full autoscan.

  5. Likes PetrolDave liked this post
  6. #5
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,986
    Post Thanks / Like
    There are many missing modules in that scan log, so you have the ignition turned on when doing the auto-scan?

  7. #6
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    USA
    Posts
    5
    Post Thanks / Like
    Yes, the ignition was on and the car running.

  8. #7
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,986
    Post Thanks / Like
    I THINK (not 100% certain) that your car doesn't have an 09 as the functions are done by the 46. So you need to look at the 46 (Central Convenience) module, why is that saying incorrectly coded?

  9. Likes Uwe liked this post
  10. #8
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    USA
    Posts
    5
    Post Thanks / Like
    I did look there, but didn't see anything about the daytime running lights . . . Not sure why it is saying incorrectly coded.

    The incorrect coding was kinda going to be my next question. I have no idea what that means, but it doesn't seem like a good thing. :-)

    I really appreciate your responses. Thank you!

  11. #9
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,986
    Post Thanks / Like
    Hopefully someone with access to tools that can provide coding suggestions from the VIN will come along soon...

  12. Likes Boki Ar liked this post
  13. #10
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,052
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by danguy View Post
    Not sure if it's my car, a setting or something else, so I'm posting this here. I've got a 2004 VW TDI New Beetle. What I had hoped to do was to disable the daytime running lights, as I keep having to replace the headlight bulbs. However, when I try to access the Cent. Electric module (09 I believe), I get a No Response from Module message.
    Electrically, that generation New Beetle is essentially an Mk.4 Golf/Jetta. It does not have an 09 module, and the lights are not computer controlled. If you wish to disable DRLs, you will have to dig into the wiring diagrams and disable them the old fashioned way.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •