Results 1 to 5 of 5

Thread: need scan/admaps of MQB with module 18 Aux Heater

  1. #1
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    ITALY
    Posts
    124
    Post Thanks / Like

    need scan/admaps of MQB with module 18 Aux Heater

    I am struggling to get the basic settings done to the heater so probably I have missed some coding, there are not many examples around.

    hoping somebody has and can share

    autoscan and admaps from modules 01 08 09 17 18 19 5F from any MQB with factory aux heater.

    Thanks

  2. #2
    Verified VCDS User
    Join Date
    Jun 2017
    Location
    Netherlands
    Posts
    8
    Post Thanks / Like
    The basic settings is a step by step procedure. Begin with inline filling of the fuel lines.

  3. #3
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    ITALY
    Posts
    124
    Post Thanks / Like
    I posted this over a month ago, the Webasto is now working. I still need to figure out why it logs an error about the car main fuel pump when it starts...

  4. #4
    Verified VCDS User
    Join Date
    Jun 2017
    Location
    Netherlands
    Posts
    8
    Post Thanks / Like
    Quote Originally Posted by darkchina811 View Post
    I posted this over a month ago, the Webasto is now working. I still need to figure out why it logs an error about the car main fuel pump when it starts...
    you need to code your engine module. What car/engine do you have?

  5. #5
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    ITALY
    Posts
    124
    Post Thanks / Like
    yes one bit needed enabling in module 01 but since it's not documented I did not now.

    this is sorted out, I posted in the retrofits section.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •