Hi
Got a 2007 Bentley with a parasitic drain and noise on coms, which we are in the final stages of proving to the Telephone Control Module (stripping to access it is no fun!). As the owner does not use said dated unit he'd rather not replace it with a new unit of the same dated design, and just remove it!
Question is this, do any of the other units need to be coded to say it's gone to avoid errors being stored (ie TPMS, Radio, CAN Gateway/Integration ECU (this vehicle does not have navigation))
If so, any clues on which ECU need to be modified and hints about the new codings needed please?
If not, are the errors going to create other issues (beyond being stored - ie keeping an ECU awake and causing a parasitic drain!)?
The low voltage and other errors appear to be related to the car having drained flat, and clear/road test ok ...except:
This one within the TPM, although it displays information fine, and the relearn feature triggers display messages too. Does the DIP (Driver Information Display) have it's own address for diagnostics?
Is this one of those "features" for this model, and it can be ignored or is a result of incorrect coding/configuration?
Full scan below, but thanks in advance for any help
Richard
PS Already sent via email the ECU scans for label file creation, except the ABS, which does not use the usual security code 4...8, is there an alternative code I can try to pull a file from that ECU to send over for you at RossTech?
Got a 2007 Bentley with a parasitic drain and noise on coms, which we are in the final stages of proving to the Telephone Control Module (stripping to access it is no fun!). As the owner does not use said dated unit he'd rather not replace it with a new unit of the same dated design, and just remove it!
Question is this, do any of the other units need to be coded to say it's gone to avoid errors being stored (ie TPMS, Radio, CAN Gateway/Integration ECU (this vehicle does not have navigation))
If so, any clues on which ECU need to be modified and hints about the new codings needed please?
If not, are the errors going to create other issues (beyond being stored - ie keeping an ECU awake and causing a parasitic drain!)?
The low voltage and other errors appear to be related to the car having drained flat, and clear/road test ok ...except:
Code:
00477 - Control Module; Display & Input; Comfort CAN; Front (J523)
004 - No Signal/Communication
This one within the TPM, although it displays information fine, and the relearn feature triggers display messages too. Does the DIP (Driver Information Display) have it's own address for diagnostics?
Is this one of those "features" for this model, and it can be ignored or is a result of incorrect coding/configuration?
Full scan below, but thanks in advance for any help
Richard
PS Already sent via email the ECU scans for label file creation, except the ABS, which does not use the usual security code 4...8, is there an alternative code I can try to pull a file from that ECU to send over for you at RossTech?
Code:
Friday,17,August,2018,14:30:11:48085VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.7.1.1 (x64) HEX-NET CB: 0.4427.4
Data version: 20180731 DS293.0
www.Ross-Tech.com
VIN: SCBLC48F17CH12312 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 8F (3Z - Bentley Arnage (2007 > 2010))
Scan: 01 02 03 15 19 47 56 65 77
VIN: SCBLC48F17CH12312
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Part No: PB1 165 11P C
Component: ME711ST10 EU4R G 07AC
Revision: --H01--- Serial number: VWZ1Z0F2886538
Shop #: WSC 01666 772 38280
VCID: 54E4AAD8F6409AEAE0-5160
1 Fault Found:
050181 - Implausible Data Received from Cruise Control Module
U0405 - 002 - - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 0
Fault Frequency: 4
Reset counter: 255
Mileage: 48167 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Load: 0.0 %
Speed: 0.0 km/h
Temperature: 74.0°C
Temperature: 72.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 5.969 V
Readiness: 0010 1001
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: None
Part No SW: PB1 156 20P A HW: GS1 911 1
Component: ZWIC2820 6.75 RdW 2820
Revision: 00000001 Serial number: 0008306
Coding: 0001111
Shop #: WSC 00000 000 00000
VCID: 52E8ACC0CC5494DAF2-5160
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: None
Part No: PC1 000 53P F
Component: ESP 5.7 rear H00 0012
Coding: 0008695
Shop #: WSC 00000 000 00000
VCID: 52E8ACC0CC5494DAF2-51CE
1 Fault Found:
01435 - Brake Pressure Sensor 1 (G201)
000 - - - Intermittent
-------------------------------------------------------------------------------
Address 15: Airbags Labels: None
Part No SW: 3Z7 909 601 HW: 3Z7 909 601
Component: 01 Airbag 9.42 H09 0060
Revision: 92H09006 Serial number: 003000001DBS
Coding: 0012337
Shop #: WSC 98765 666 30559
VCID: 7DB22F7C244ABBA27F-8028
Subsystem 1 - Serial number: 63300RB4 E
Subsystem 2 - Serial number: 63400RB4 F
Subsystem 3 - Serial number: 63500RB4 G
Subsystem 4 - Serial number: 63600RB4 H
Subsystem 5 - Serial number: 63700RB4 I
Subsystem 6 - Serial number: 638 RB4 9
1 Fault Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Time Indication: 0
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: None
Part No HW: HW1 03
Revision: 11001001 Serial number: 00000000000363
VCID: 55E257DCFDBA83E217-5160
Subsystem 13 - Part No: 3Z0 909 901
Component: CAN LS Gateway 0105
Shop #: WSC 12336 024 394758
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: None
Part No: PM1 121 70P C
Component: concert II GRO 0002
Coding: 01002
Shop #: WSC 00000
VCID: 5CF442F8CE9052AA28-4B00
1 Fault Found:
00668 - Supply Voltage Terminal 30
07-10 - Signal too Low - Intermittent
-------------------------------------------------------------------------------
Address 65: Tire Pressure Labels: None
Part No: 3W7 907 273
Component: Reifendruckueberw. 0003
Coding: 0080324
Shop #: WSC 98765 666 36774
VCID: 7DB22F7C254ABBA27F-5160
3 Faults Found:
00477 - Control Module; Display & Input; Comfort CAN; Front (J523)
004 - No Signal/Communication
00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded - Intermittent
01833 - Antenna for Tire Pressure Monitoring; Rear (R96)
004 - No Signal/Communication - Intermittent - MIL ON
-------------------------------------------------------------------------------
Address 77: Telephone Labels: None
Part No SW: PM1 144 36P A HW: PM1 144 36P A
Component: UHV Premium rSAP 0020
Coding: 0000256
Shop #: WSC 00000 000 00000
VCID: 618A730CB9F27F427B-5160
1 Fault Found:
00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded
End----(Elapsed Time: 01:55, VBatt start/end: 11.4V/11.3V. VIgn 11.4V)-----