Hi folks, shiney new to the forum and looking for some high level advice.
I'm looking at the feasibility of retrofitting 4motion to a 2014 T5.1 transporter van. The hardware side I'm reasonably confident about but I'm trying to work out the electrical/control side, I know there are independent haldex controllers available but ideally I'd like the retrofit to work as vw intended, so question is can my present ecu be "unlocked" or reprogrammed to accept the 4motion haldex control or do i need to start off with an ecu from a 4motion van, forgive me if its a bit of a beginners question but I'm a little new to vw's.
Thanks all.
Mav
I'm looking at the feasibility of retrofitting 4motion to a 2014 T5.1 transporter van. The hardware side I'm reasonably confident about but I'm trying to work out the electrical/control side, I know there are independent haldex controllers available but ideally I'd like the retrofit to work as vw intended, so question is can my present ecu be "unlocked" or reprogrammed to accept the 4motion haldex control or do i need to start off with an ecu from a 4motion van, forgive me if its a bit of a beginners question but I'm a little new to vw's.
Thanks all.
Mav
Last edited: