Page 5 of 5 FirstFirst ... 345
Results 41 to 50 of 50

Thread: Tiguan ad1 led retrofit problem

  1. #41
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Poland
    Posts
    4
    Post Thanks / Like
    Quote Originally Posted by vastechnics View Post
    The retrofit with the 4B module is very difficult is my experience. Better to work with the 55 xenon range module. I have retrofit this a lot. Use the 7P6 907 357 E with tiguan file. Make coding in adaptions in 09 and basic settings in 55. Finish.

    May you explain how to use 55 with LED? pinout for 55 so that 29 39 D6 D7 will work?

  2. #42
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,231
    Post Thanks / Like
    What do you mean? That it doesn't work?

    I have 2017 Tiguan with dynamic leds and it uses module 55. Check my cars autoscan : https://forums.ross-tech.com/showthr...l=1#post177795

    Newer Tiguans use 4B module.

    If you want pinout then buy some quality time from Erwin and print the diagrams.

  3. Likes Uwe, m87a liked this post
  4. #43
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Poland
    Posts
    4
    Post Thanks / Like
    I have retrofited Tiguan with 29 39 D6 D7 and 4B

    It's USA imported car.

    I have all done, all works without AFS

    I'm thinking if I need front camera to install for this AFS fault or its not necessery?

  5. #44
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    USA
    Posts
    29
    Post Thanks / Like
    Quote Originally Posted by r87mc0 View Post
    I have retrofited Tiguan with 29 39 D6 D7 and 4B

    It's USA imported car.

    I have all done, all works without AFS

    I'm thinking if I need front camera to install for this AFS fault or its not necessery?
    I am currently preparing to retrofit OEM Led Headlights on NAR BW2 Tiguan. As far as I can tell you dont need to retrofit camera. Camera will only add automatic automatic high bean and other features

  6. #45
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Poland
    Posts
    4
    Post Thanks / Like
    Do anyone know what is the login for 4B basic settings ?

  7. #46
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,231
    Post Thanks / Like
    Quote Originally Posted by OEMplusCC View Post
    I am currently preparing to retrofit OEM Led Headlights on NAR BW2 Tiguan. As far as I can tell you dont need to retrofit camera. Camera will only add automatic automatic high bean and other features
    Camera adds the usual front assist safety functions but it’s not conventional high beam assist. It’s dynamic light assist which brings the shading function. Not dropping the high beams but instead ”shades” the oncoming traffic and car in front of you.
    It’s really nice function.

    So if you have the interest to retrofit the front camera, you’ll get some nice benefits

  8. Likes OEMplusCC liked this post
  9. #47
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Poland
    Posts
    4
    Post Thanks / Like
    I have just one fault in 4B.
    It calls Basic settings

    I can't figure out how AFS works

    Some autoscan have 55 29 39 D6 D7 and some 4B A5 29 39 D6 D7

    Also some of admap from 09 have lwr or headlight leveling sensor not active and some one of them active.

    I've added 4B 29 39 D6 D7 to NAR version without A5

    Now I have all done without Basic settings and AFS failure on dash.

    Is there any posibility to add lwr sensor to bcm harness?

  10. #48
    Verified VCDS User
    Join Date
    Apr 2019
    Location
    USA
    Posts
    29
    Post Thanks / Like
    Quote Originally Posted by r87mc0 View Post

    Is there any posibility to add lwr sensor to bcm harness?
    I'm actually looking into it as well. See my post
    https://forums.ross-tech.com/showthr...o-and-Question

    I think Arteon wiring might work but I'm not sure

  11. #49
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    Greece
    Posts
    41
    Post Thanks / Like
    Quote Originally Posted by r87mc0 View Post
    I have just one fault in 4B.
    It calls Basic settings

    I can't figure out how AFS works

    Some autoscan have 55 29 39 D6 D7 and some 4B A5 29 39 D6 D7

    Also some of admap from 09 have lwr or headlight leveling sensor not active and some one of them active.

    I've added 4B 29 39 D6 D7 to NAR version without A5

    Now I have all done without Basic settings and AFS failure on dash.

    Is there any posibility to add lwr sensor to bcm harness?
    did you camera ?a5 for afs works need a5 .
    need to make the basic setting . its easy and first aknwolege basic and after basic
    Vw Tiguan AD1 2.0 tdi 190hp 4motion DSG

  12. #50
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    105
    Post Thanks / Like
    The LWR must be connected otherwise the basic setting can't be done. LWR needs to be connected to the BCM in no case of 14 Suspension Electronics. Otherwise to the J250. AFS can work without the A5. Only additional functions needs A5, like MDF and GLW or some don't know terms exaclty.

  13. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •