Results 1 to 6 of 6

Thread: Skoda Octavia II Scout 2010 Bulbs Error and problem

  1. #1
    Pirate
    Join Date
    Jul 2018
    Location
    Budapest, Hungary
    Posts
    3
    Post Thanks / Like

    Skoda Octavia II Scout 2010 Bulbs Error and problem

    Hi Guys,


    I've got a Skoda Octavia II Scout and I think I made a little mistake with the rear bulbs. I replaced it to LED bulbs, every Led worked fine, but the computer said the Bulb error. I've read it, that I can switch off the Bulb out error with VCDS (overwrite the Binary 18). Thats OK.
    After edited it, lot of the error messages ar disappierd, expect the plate bulbs. Than I checked the lights, and I noticed, that the left reverse light and 2 of the taillight (the bottoms) doesn't work.
    I put back the original bulbs, but it didn't changed. I restored the Binary 18 to the original state, but the "wrong" bulbs also don't work.
    It looks like software failure, becaouse the fog light works (one of the bottom taillight lights stronger).

    Can you help me please in this case? (firstly restore the original working state, secondly use correctly led bulbs without error messages)

  2. #2
    Verified VCDS User iichel's Avatar
    Join Date
    Aug 2016
    Location
    Switzerland
    Posts
    1,382
    Post Thanks / Like
    (see below)

    Last edited by iichel; 07-27-2018 at 04:09 PM.

  3. #3
    Pirate
    Join Date
    Jul 2018
    Location
    Budapest, Hungary
    Posts
    3
    Post Thanks / Like
    Code:
    Removed.  Data from a clone/pirate copy of VCDS is not welcome here.
    Last edited by Uwe; 07-27-2018 at 08:46 PM.

  4. #4
    VCDS Distributor Boki Ar's Avatar
    Join Date
    Oct 2014
    Location
    Arandjelovac, Serbia
    Posts
    917
    Post Thanks / Like
    Thread lock until further notice.

  5. Likes Uwe liked this post
  6. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    19,614
    Post Thanks / Like
    Blog Entries
    1
    Unlocked, but moved to the Hall of Shame.

    Getting help on this forum requires the use of a legitimate VCDS system.

    The are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized resellers:
    http://www.ross-tech.com/distributors.php#hu

    Let us know via PM if/when you get one so we can adjust your forum status.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. Likes Boki Ar liked this post
  8. #6
    Pirate
    Join Date
    Jul 2018
    Location
    Budapest, Hungary
    Posts
    3
    Post Thanks / Like
    I didn't know, that my VCDS is not valid.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •