Results 1 to 5 of 5

Thread: A6 C7 2011 problem Vent and engine

  1. #1
    Pirate
    Join Date
    Jul 2018
    Location
    Poland
    Posts
    2
    Post Thanks / Like

    A6 C7 2011 problem Vent and engine

    hello, sorry for my english... i have two problems.
    first. I started the car and then turned off. After checking the errors:
    Code:
    1 Fault Found: 
    
    18660 - Start Interruption due to Insufficient Engine Speed 
              P151D 00 [032] - - 
              Intermittent - Not Confirmed - Tested Since Memory Clear 
                 Freeze Frame: 
                        Fault Status: 00000001 
                        Fault Priority: 6 
                        Fault Frequency: 1 
                        Mileage: 150903 km 
                        Date: 2018.06.29 
                        Time: 20:29:37 
    
    
    Readiness: 0 0 0 0 0
    two. I don't understand what's going on here...
    Code:
    1 Fault Found: 
    
    0033 - Motor for Rear Right Upper Body Vent 
              B10D4 22 [009] - Signal Amplitude Too High 
              Confirmed - Tested Since Memory Clear 
                 Freeze Frame: 
                        Fault Status: 00000001 
                        Fault Priority: 3 
                        Fault Frequency: 21 
                        Reset counter: 137 
                        Mileage: 149668 km 
                        Date: 2018.06.12 
                        Time: 17:28:11
    Anyone had this problem?
    Best regats!

  2. #2
    Verified VCDS User
    Join Date
    Nov 2015
    Location
    UK
    Posts
    91
    Post Thanks / Like
    There's not enough data there to answer any questions. A full autoscan will be needed rather than just the fault codes.
    Last edited by Uwe; 07-05-2018 at 10:25 AM. Reason: Added link

  3. Likes Boki Ar, PetrolDave, Uwe liked this post
  4. #3
    Pirate
    Join Date
    Jul 2018
    Location
    Poland
    Posts
    2
    Post Thanks / Like

    A6 C7 2011 engine and vent problem

    Hi, i have a problem, look this logs.
    Code:
    Removed.  Data from a clone/pirate copy of VCDS is not welcome here.
    I started the car and then turned off. so first fault it's about that.

    best regats!
    Last edited by Uwe; 07-31-2018 at 08:11 AM.

  5. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    19,615
    Post Thanks / Like
    Blog Entries
    1
    Getting help on this forum requires the use of a legitimate VCDS system.

    The are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized resellers:
    http://www.ross-tech.com/distributors.php#pl

    Let us know via PM if/when you get one so we can adjust your forum status.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. #5
    Verified VCDS User
    Join Date
    Jan 2018
    Location
    UK
    Posts
    22
    Post Thanks / Like
    Missed some again Uwe.
    2006 EOS 3.2 V6.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •