Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: 0778 2006 Audi A6 vant Quattro 3.2

  1. #21
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,550
    Post Thanks / Like
    Blog Entries
    1
    I don't find it surprising at all that you can't calibrate the steering angle sensor when the ABS has a DTC indicating that it has no communications with that sensor.

    -Uwe-

  2. Likes jakematic, gupsterg liked this post
  3. #22
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    USA
    Posts
    28
    Post Thanks / Like
    Well, I took out the A8 steering control module which would not communicate with my ABS control unit but did allow my heated steering wheel to work, and re-installed the steering control module originally installed in my A6 which does communicate with my ABS unit although won't accept coding for the HSW. I am wondering why the A8 module doesn't communicate with my ABS unit. Could it be a matter of coding? It would seem all the modules must, at least, communicate with the ABS as all cars have that as std. equip. There is security for Steering but I don't know where to find it and VCDS doesn't provide it as it does for ABS. If this information is not available I'm just going to bite the bullet and get the module ETKA says is proper for A6 w/ HSW as per gupster's last comments.
    Thanks for the help.
    Kurt

  4. #23
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    USA
    Posts
    28
    Post Thanks / Like
    I guess I must have overstayed my welcome on the forum. I apologize for taking so much of everyone's time. I found a "C" module and will install it to see if my retro works. I am considering posting a complete retro procedure if this does work OK. This may eliminate some issues others may encounter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •