Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: ECM swap

  1. #11
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    Normally I get $350 + 50 USD standard freight to observe each controller I touch, plus apply that observation fee toward a service.

    In this case my offer is 50 USD to cover freight + a donation you see fit.

    This is my good deed offer for the day extended.

    Do as you wish.......

    https://europeanpartsemporium.com/contact/
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  2. Likes iichel, Dukedesmo liked this post
  3. #12
    Professional User Jetta ,97's Avatar
    Join Date
    Apr 2014
    Location
    Dallas (McKinney) ,TX ,USA
    Posts
    635
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    James.......

    I can do it ....just need your credentials to ID you and car ownership or if doing Immo defeat, data transfer, just cost is insured freight and a donation of your choosing for being a VCDS forum member to welcome you.

    I don't need to see the old ecu talk either........

    Send me old ecu and used one.

    No dual identities permitted.

    Best,

    Jack
    Jack, IF is MCU dead , no way to get info form it , like water damage or etc. I run few times in this problem.
    This is 2013 model, should be UDS protocol , so Immo defeat is out of the question.
    Master Technician for German cars
    Immobilizer/ECU
    /Cluster Programing (Used or NEW) and Key Programing
    Mk6 COLOR cluster in Mk5 -CLIK

    email : marinmm2001@gmail.com

  4. #13
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    Jack, IF is MCU dead , no way to get info form it , like water damage or etc. I run few times in this problem.
    This is 2013 model, should be UDS protocol , so Immo defeat is out of the question.
    OP just an FYI:

    The controller you submitted supplied by your customer or prior customers repair shop & to be used as replacement, is tampered & for a CBFA not a CCTA with different SMOG tier.

    Marin

    ECU is not UDS.
    UDS and TP 2.0 or MED17 ECU's can indeed have the Immo removed.
    Just because an ECU doesn't communicate with VCDS & via normal diagnostic methods, doesn't mean an MCU is dead.
    I look forward to proving that & other ubiquitous inaccurate statements you have made in the past, indeed are wrong.
    Last edited by Jack@European_Parts; 06-09-2018 at 06:48 AM. Reason: Stripped!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  5. #14
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    Very good!

    VINCheck® Results

    VIN: WVWBN7AN2DE515894
    VINCheck® Theft Record

    VIN: WVWBN7AN2DE515894 has not been identified as a vehicle listed in the VINCheck® Theft Records.
    VINCheck® is updated regularly as additional information is reported.

    VINCheck® Total Loss Record

    VIN: WVWBN7AN2DE515894 has not been identified as a vehicle listed in the VINCheck® Salvage Records.
    VINCheck® is updated regularly as additional information is reported.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  6. #15
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    Jack, IF is MCU dead , no way to get info form it , like water damage or etc. I run few times in this problem.
    This is 2013 model, should be UDS protocol , so Immo defeat is out of the question.

    And than there is reality!


    --------------------------------------------------------------------------------




    Address 01: Engine
    Control Module Part Number: 06J 906 027 FE
    Component and/or Version: MED17.5.2 TFSI 2 06 5369
    Software Coding: 0404010A1C070160
    Work Shop Code: WSC 03738


    Advanced Identification
    Serial number:
    Identification: BPG-810
    Revision: P3H07---
    Date: 27.08.12
    Manufacturer number: 1586
    Test stand number: 1324
    Flash Status
    Programming Attempts: 2
    Successful Attempts: 2
    Programming Status: 00000000
    Required Conditions: 00000000
    Flash Tool Code: 452326 152 78387
    Flash Date: 00.00.00
    Software
    A0101
    M13E00
    Misc.
    Hardware number: 06J 907 309 A
    Car Info
    Chassis Number: WVWBN7AN2DE515894
    Engine code: CCT
    VCDS Info:
    Labels: None
    Readiness: No script available




    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------




    Adaptation Channel 091:
    Stored value 1
    N/A
    N/A
    N/A
    N/A
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  7. Likes Jetta ,97 liked this post
  8. #16
    Professional User Jetta ,97's Avatar
    Join Date
    Apr 2014
    Location
    Dallas (McKinney) ,TX ,USA
    Posts
    635
    Post Thanks / Like
    Jack, read my post again ,
    I said "IF MCU IS DEAD ",
    I never said it is not possible to read data form ECU if can not communicate with VCDS.
    Master Technician for German cars
    Immobilizer/ECU
    /Cluster Programing (Used or NEW) and Key Programing
    Mk6 COLOR cluster in Mk5 -CLIK

    email : marinmm2001@gmail.com

  9. #17
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    Marin,

    MCU is almost never dead, that is what a programmer & external after being de-soldered is for.
    Plus you said Immo defeat can't be done again and indeed it can.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  10. #18
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    13,061
    Post Thanks / Like
    I spoke with James today & to verify that this is indeed solved and when he has time he will tell the story.
    Immobilizer defeat Successful Marin!
    NostraJackASS Has Spoken!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  11. Likes iichel liked this post
  12. #19
    Verified VCDS User
    Join Date
    Nov 2016
    Location
    UK
    Posts
    76
    Post Thanks / Like
    Well done Jack, love reading success stories like this, very talented

  13. #20
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Ok, finally taking time out to finish this post. Jack is awesome! He was able to supply me with a functional control unit that had the immobilizer disabled. Best part is that it was all done legitimately, and by the book. Three months later, and everything is all well.

    Thanks again Jack!

  14. Likes Uwe, NZDubNurd, PetrolDave, rhinopower liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •