Hi All,
So over the weekend, I pulled off one heck of a procedure on my 2003 jetta with 207,xxx miles! It consisted of replacing a cracked exhaust manifold, leaking flex joint on downpipe, and the original K03s turbo with a K04-001 with only 30,xxx miles on it.
After about ~12 hours, I had pulled off success! Bled my coolant system, and everything looked good, i was so happy!
Car ran well, no CEL came up, no boost issues, or anything of the sort. Sadly, I did not perform an auto-scan immediately prior to starting the procedure =( Last time I did an autoscan was on 4/2/18 and I did not have this code.
Anyway, after completing and driving for a day or 2, I ran an autoscan and I get P1287 - Boost Pressure Control Valve (N249) Open Circuit.
Entire autoscan is here:
I first thought I had forgotten to put back the N249 electrical plug i removed on back of intake manifold plate, but checked that and it is indeed plugged in. Also, checked function of my DV (forge 007) and it holds vacuum OK. So my question is, how can I test using Vag-com the functionality of the N249 valve, prior to shelling out $ for a new one?? Or is there something else I should be looking at?
Thank you all!
So over the weekend, I pulled off one heck of a procedure on my 2003 jetta with 207,xxx miles! It consisted of replacing a cracked exhaust manifold, leaking flex joint on downpipe, and the original K03s turbo with a K04-001 with only 30,xxx miles on it.
After about ~12 hours, I had pulled off success! Bled my coolant system, and everything looked good, i was so happy!
Car ran well, no CEL came up, no boost issues, or anything of the sort. Sadly, I did not perform an auto-scan immediately prior to starting the procedure =( Last time I did an autoscan was on 4/2/18 and I did not have this code.
Anyway, after completing and driving for a day or 2, I ran an autoscan and I get P1287 - Boost Pressure Control Valve (N249) Open Circuit.
Entire autoscan is here:
Code:
Tuesday,05,June,2018,13:05:47:53404
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.2.1.2 (x64) HEX-V2 CB: 0.4411.4
Data version: 20180518 DS287.1
www.Ross-Tech.com
VIN: 3VWSE69M03M161580 License Plate: BR49BL
Mileage: 332620km-206680mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 9M (9M - VW Jetta IV (1998 > 2014))
Scan: 01 02 03 08 09 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57
75 76
VIN: 3VWSE69M03M161580 Mileage: 332620km-206680miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AWP.lbl
Part No: 06A 906 032 LP
Component: 1.8L R4/5VT G 0007
Coding: 07500
Shop #: WSC 12857
VCID: 77AB16EA06D04D7F40D-5160
3VWSE69M03M161580 VWZ7Z0C6698338
1 Fault Found:
17695 - Boost Pressure Control Valve (N249)
P1287 - 35-00 - Open Circuit
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ESP-F.lbl
Part No: 1C0 907 379 M
Component: ESP FRONT MK60 0102
Coding: 0019970
Shop #: WSC 00066 000 00000
VCID: 3431E1E652266667A5F-5184
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 04 AIRBAG VW61 0202 0001
Coding: 12340
Shop #: WSC 00066
VCID: 270B06AA96F01DFF10D-513C
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1J0-907-487-A.lbl
Part No: 1J0 907 487 A
Component: Lenkradelektronik 0005
Coding: 00118
Shop #: WSC 00066
VCID: 2F3BEE8ABE0045BFD8D-5184
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.lbl
Part No: 1J0 920 906 J
Component: KOMBI+WEGFAHRSP VDO V65
Coding: 07232
Shop #: WSC 08080
VCID: 2F3BEE8ABE0045BFD8D-513C
3VWSE69M03M161580 VWZ7Z0C6698338
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 00066
VCID: 70B92DF663BE1A47817-513C
1 Fault Found:
01334 - Door Control Module; Rear Right (J389)
49-00 - No Communications
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.lbl
Part No: 1C0 959 799 C
Component: 1H Komfortgerát HLO 0003
Coding: 00259
Shop #: WSC 00066
VCID: 372BD6EA46508D7F80D-4B1E
Subsystem 1 - Part No: 1C1959801A
Component: 1H Tõrsteuer.FS KLO 0009
Subsystem 2 - Part No: 1C1959802A
Component: 1H Tõrsteuer.BF KLO 0009
Subsystem 3 - Part No: 1C0959811A
Component: 1H Tõrsteuer.HL KLO 0009
Subsystem 4 - Part No: Steuerger
Component: t HR antwortet nicht
1 Fault Found:
01334 - Door Control Module; Rear Right (J389)
49-00 - No Communications
-------------------------------------------------------------------------------
Address 56: Radio Labels: 3B7-035-1xx-56.lbl
Part No: 3B7 035 180 E
Component: RADIO 3CP 0004
Coding: 04031
Shop #: WSC 00066
VCID: 221D17BEFDD2F8D7473-513C
No fault code found.
End----------(Elapsed Time: 05:00, VBatt start/end: 12.1V/12.1V)-----------I first thought I had forgotten to put back the N249 electrical plug i removed on back of intake manifold plate, but checked that and it is indeed plugged in. Also, checked function of my DV (forge 007) and it holds vacuum OK. So my question is, how can I test using Vag-com the functionality of the N249 valve, prior to shelling out $ for a new one?? Or is there something else I should be looking at?
Thank you all!
