Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: 01794 - Control Module Incorrect Chassis (VIN) Number

  1. #11
    FoRT jyoung8607's Avatar
    Join Date
    Feb 2014
    Location
    Cincinnati, OH
    Posts
    2,348
    Post Thanks / Like
    Quote Originally Posted by rayjones View Post
    ill have to go back to the firm that tried to clear the crash data
    I'm i right in saying that they made the module defective
    It's very possible (but not definite) that they broke the module in some way while trying to clear crash data.

    Again, I do not recommend using a used airbag module. Even if the airbag warning light is off, there's no particular guarantee it will actually deploy airbags in a future crash.

    Quote Originally Posted by rayjones View Post
    while a new airbag module clear all the faults
    A new airbag controller would not have the crash-data stored and control module defective DTCs. It would probably also clear up the airbag igniter DTCs. Those are all flagged as intermittent and would probably go away if cleared. I'm assuming you've installed new airbags.

    It would still probably show the seatbelt tensioner DTCs. Those are not flagged as intermittent; they are still a problem. There are one-shot pyrotechnic devices in the seatbelt re-winder mechanisms that tighten the seatbelts during a crash. They will need to be replaced, just like the airbags.

    Jason

  2. Likes Uwe liked this post
  3. #12
    New User
    Join Date
    Oct 2014
    Location
    UK
    Posts
    9
    Post Thanks / Like
    i have now got a new module for the audi how can i install it using a vag com

  4. #13
    New User
    Join Date
    Oct 2014
    Location
    UK
    Posts
    9
    Post Thanks / Like
    i have now got a new module for the audi how can i install it using a vag com

  5. #14
    New User
    Join Date
    Oct 2014
    Location
    UK
    Posts
    9
    Post Thanks / Like
    hi jason young thank you for your advise i have now brought a new air bag module but how can i install it with a vag com

  6. #15
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,781
    Post Thanks / Like
    Blog Entries
    1
    After you register your system with us for support, like we asked almost one year ago, and we can make you a Verified User here, then we'll tell you.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. Likes Zenerdiode liked this post
  8. #16
    Verified VCDS User
    Join Date
    May 2014
    Location
    USA
    Posts
    27
    Post Thanks / Like
    I have the same problem with an audi a4 2005. I bought this car and car fax is clean don't look like was in a crash.

    Code:
    Address 15: Airbags        Labels: 8E0-959-655-94.lbl
       Part No SW: 8E0 959 655 H    HW: 8E0 959 655 H
       Component:    Airbag 9.41  H10 3230  
       Revision: 91H10323    Serial number: 0036N0001P9O  
       Coding: 0032607
       Shop #: WSC 06335 000 00000
       VCID: 3C773B317FF4FFA2B2-8068
    
       Subsystem 1 - Part No: 8E0 910 339 B
       Component: BF-Gewichtsens. 02  0070  
       Serial number: 6332DRB4011207ADH
       Coding: 00032607
    
       Subsystem 2 - Serial number: 6342DRB401094B10A
    
       Subsystem 3 - Serial number: 6352ARB4003BC4B1O
    
       Subsystem 4 - Serial number: 6362ARB4003B747BQ
    
       Subsystem 5 - Serial number: 63729RB40033F0BAP
    
       Subsystem 6 - Serial number: 63829RB40033EE54R
    
    3 Faults Found:
    01794 - Control Module - Incorrect Chassis (VIN) Number 
                000 -  -  - Intermittent
                 Freeze Frame:
                        Fault Status: 00110000
                        Fault Priority: 2
                        Fault Frequency: 11
                        Reset counter: 99
                        Time Indication: 0
    
    01217 - Side Airbag Igniter; Driver Side (N199) 
                001 - Upper Limit Exceeded - MIL ON
                 Freeze Frame:
                        Fault Status: 11100001
                        Fault Priority: 1
                        Fault Frequency: 254
                        Reset counter: 255
                        Time Indication: 0
    
    01316 - ABS Control Module 
                008 - Implausible Signal - Intermittent
                 Freeze Frame:
                        Fault Status: 00101000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 99
                        Time Indication: 0
    Last edited by Uwe; 09-27-2016 at 10:03 AM.

  9. #17
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,781
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by ajea7474 View Post
    I have the same problem with an audi a4 2005. I bought this car and car fax is clean don't look like was in a crash.
    The two fault codes that are flagged "Intermittent" should clear without further ado.

    For the Side Airbag Igniter code that's not intermittent, check the connections going to that airbag -- I think it's in the seat on that car?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  10. #18
    Verified VCDS User
    Join Date
    Sep 2016
    Location
    Riga, Latvia
    Posts
    746
    Post Thanks / Like
    Complete autoscan needed to see all situation and give some suggestions.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •