Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Issues with White Cluster Swap into 2006 B6 Passat

  1. #11
    Verified VCDS User Spacewalker's Avatar
    Join Date
    Jun 2014
    Location
    Poland
    Posts
    838
    Post Thanks / Like
    Quote Originally Posted by Jetta ,97 View Post

    But your main problem will be fuel gauge , it will not read correct, because cluster not see Fuel level sensor 2.
    For this email me direct.

    Address 17: Instruments (J285) Labels:| 3C8-920-xxx-17.clb-SRI1
    Part No SW: 3C8 920 971 B HW: 3C8 920 971 B
    Component: KOMBI H05 0705
    Serial number: 00000000000000
    Coding: 240D00
    Shop #: WSC 00028 028 00001
    ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04716
    ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
    VCID: 2C020CD406800D97FE0-8078
    1 Fault Found:
    9459739 - Fuel Level Sensor 2

    B1058 1B [009] - Resistance Too High
    Confirmed - Tested Since Memory Clear
    Freeze Frame:
    he have 4WD, he just need missing PIN into adaptor ,. he knew that already
    HOT HOT HOT VW Touran 2005 with ACC HOT HOT HOT

  2. Likes Jetta ,97, Uwe liked this post
  3. #12
    Verified VCDS User
    Join Date
    Aug 2017
    Location
    USA
    Posts
    11
    Post Thanks / Like
    After disconnecting the battery for an hour, the audio menu appeared on the cluster. All is good now. Regarding the compass, what will I need to enable this?

  4. #13
    Verified VCDS User
    Join Date
    Feb 2020
    Location
    USA
    Posts
    5
    Post Thanks / Like
    I have the same issue with fuel gauge. Can you provide what pins have to be changed or added. Thank you.

  5. #14
    Verified VCDS User
    Join Date
    Feb 2020
    Location
    USA
    Posts
    5
    Post Thanks / Like
    Quote Originally Posted by Spacewalker View Post
    he have 4WD, he just need missing PIN into adaptor ,. he knew that already
    Do you have the details?

  6. #15
    Verified VCDS User Spacewalker's Avatar
    Join Date
    Jun 2014
    Location
    Poland
    Posts
    838
    Post Thanks / Like
    Quote Originally Posted by mreuro View Post
    I have the same issue with fuel gauge. Can you provide what pins have to be changed or added. Thank you.
    but what happen ?
    you did retrofits , or what ...
    more details always need ...not just simple "help"
    HOT HOT HOT VW Touran 2005 with ACC HOT HOT HOT

  7. #16
    Verified VCDS User
    Join Date
    Mar 2015
    Location
    Australia
    Posts
    394
    Post Thanks / Like
    For Passat you need to modify the 32-36 pin adapter harness as they do not include all the needed wires (add these wires)

    Black 36 pin -> Blue 32 pin
    16 -> 3
    23 -> 4

    Suitable for Passat 4mo.
    For Golf 4mo you also need to add a wire to fuel sender 2 under the back seat as it is missing a wire from the fuel sender to the cluster at pin 4 of the new 32pin connector.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|THA475 Amp+active sub|Whiteline ALK|RVC|Discover Media
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|Full colour MFD|Quad LED tail rings| Climatronics upgrade| Dynaudio retrofit | B7 RLine Flat Steering Wheel|3AA CCM|B7 Adaptive Cruise with Front Assist|TPMS Direct|Discover Media retrofit|PLA 2.0|Lane Assist|BCM Retrofit|HBA/FLA

  8. #17
    Verified VCDS User
    Join Date
    Feb 2020
    Location
    USA
    Posts
    5
    Post Thanks / Like
    Quote Originally Posted by Spacewalker View Post
    but what happen ?
    you did retrofits , or what ...
    more details always need ...not just simple "help"
    Yes I did retrofit Cluster from 2012 CC and I did get the adapter and I do have the same codes and the fuel gauge is only showing 1/2 tank.

  9. #18
    Verified VCDS User
    Join Date
    Feb 2020
    Location
    USA
    Posts
    5
    Post Thanks / Like
    Quote Originally Posted by kamold View Post
    For Passat you need to modify the 32-36 pin adapter harness as they do not include all the needed wires (add these wires)

    Black 36 pin -> Blue 32 pin
    16 -> 3
    23 -> 4

    Suitable for Passat 4mo.
    For Golf 4mo you also need to add a wire to fuel sender 2 under the back seat as it is missing a wire from the fuel sender to the cluster at pin 4 of the new 32pin connector.


    Thank you!

  10. #19
    Verified VCDS User
    Join Date
    Feb 2020
    Location
    USA
    Posts
    5
    Post Thanks / Like
    I know I still have to code the cluster to read from two fuel senders not one. I found where I have to do it but i need the security code to do it. I have looked and I found one security code but it still wont let me change it from 1 to 2.
    The code I found is 25327 was accepted but not to change what i need to change.

  11. #20
    Verified VCDS User Spacewalker's Avatar
    Join Date
    Jun 2014
    Location
    Poland
    Posts
    838
    Post Thanks / Like
    Quote Originally Posted by mreuro View Post
    I know I still have to code the cluster to read from two fuel senders not one. I found where I have to do it but i need the security code to do it. I have looked and I found one security code but it still wont let me change it from 1 to 2.
    The code I found is 25327 was accepted but not to change what i need to change.
    no ...you dont now
    this always show 1 , even if car is factory 2 fuel sensor
    HOT HOT HOT VW Touran 2005 with ACC HOT HOT HOT

  12. Likes NEtech, Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •